Jh-M-Pal-19 / 2021-22 Repair And Maintenance Of Roads
Tender Value
1.34 Crore
Estimated cost
Bid Submission
28 Jan 2022
0 days left
EMD
2.69 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
PALAMAU → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Jh-M-Pal-19 / 2021-22 Repair And Maintenance Of Roads
BOQ
| Sl. No. | Item Description |
| 1 | Details |
| 2 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 mas per Technical Specification Clause 201. |
| 3 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with free lead as per Technical Specification Clause 303.1. |
| 4 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. |
| 5 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401. Grading-III Materials |
| 6 | Providing, Laying, spreading and Compacting of WBM Grading II (Size 63mm to 45mm) stone aggregate of specific size to water bound macadam specification including spreading, in uniform thickness, hand pacing. Rolling with three 80-100KN static roller in stages to proper grade and camber, applying and brooming crushable screening to fill up the intersticwes of coarse aggregare, watering and compacting to the required density Grading 2 as per Technical Specification clause 405 by manual means |
| 7 | Providing, Laying, spreading and Compacting of WBM Grading III (Size 53mm to 22.4mm) stone aggregate of specific size to water bound macadam specification including spreading, in uniform thickness, hand pacing. Rolling with three 80-100KN static roller in stages to proper grade and camber, applying and brooming crushable screening to fill up the intersticwes of coarse aggregare, watering and compacting to the required density Grading 3 as per Technical Specification clause 405 by manual means. |
| 8 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning the road surface and spraying prime @ 0.70 to 1.0 Kg /Sqm using mechanical means as per Technical Specification clause 502 |
| 9 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per Technical Specification Clause 504. |
| 10 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 11 | Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects.Grading II: 10 mm (Nominal Size) |
| 12 | Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703. 5th Km post |
| 13 | Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703 Ordinary Km post |
| 14 | Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703 200M Stone (Precast) |
| 15 | Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703Boundary Pillr (Precast) |
| 16 | Providing and fixing of typical PMGSY Informatory Signboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25x 25x 5mm as per technicaal specification clause 1701and Annexure 1700.1 |
| 17 | Providing Direction, Village and School Signboard as per IRC:67 made of f encapsulated lens type reflective sheeting vide Clause 1701.2.3 Fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on mils steel single iron post 75x75x6mm firmly fixed to the ground level as per approved drawing and Technical Specification Clause 1701. |
| 18 | Providing and fixing of retro-reflectorised Cautionary, Mandatory and Informatory Sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and Technical Specification Clause 801 |
| 19 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. |
| 20 | E/W in excavation for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and brading, removal of stumps and other deleterious material and disposal utp a lead of 50m, dressing of sides and bottom backfilling in trenches with excavated suitable material. |
| 21 | Plain cement concrete in open foundation complete as per drawing and Technical Specifications(P.C.C. Grade M-10 with nominal mix 1:3:6) |
| 22 | Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203.Random Rubble Masonary in C.M. 1:4 in foundation in Drain & in Retaining Wall |
| 23 | Providing random rubble stone masonry in C:M (1:4) in sub-structure complete as per drawing and technical specifications.Random Rubble Masonry Work in Cement Mortar 1:4 in S/S Retaining Wall |
| 24 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications(P.C.C. Grade M-15 in Coping) |
| 25 | Pointing with cement mortar (1:3) on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204 |
| 26 | Providing weep holes with day grades stone filter of 20 mm to 40 mm size in abutment and wing wall as per specification and direction of E/I. |
| 27 | GST @ 12% |
| 28 | Labour Cess @ 1% |
AI Tender Summary
Tender Timeline
Jan 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 28, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 31, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender