Mankada Block Panchayath 2021-22 Entry Gate Construction For Chcs In Puzhakkattiri And Mankada Mankada Block Panchayath 2021-22 Entry Gate Construction For Chcs In Puzhakkattiri And Mankada
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Jan 2022
0 days left
EMD
7500
Bank guarantee accepted
Document Fee
710
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ramapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mankada Block Panchayath 2021-22 Entry Gate Construction For Chcs In Puzhakkattiri And Mankada Mankada Block Panchayath 2021-22 Entry Gate Construction For Chcs In Puzhakkattiri And Mankada
BOQ
| Sl. No. | Item Description |
| 1 | APPENDIX A-GATE FOR MANKADA CHC |
| 2 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock |
| 3 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 4 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size |
| 5 | 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 7 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 8 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 9 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 10 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 11 | od1586228/2021_2022 : Providing and fixing 1 st quality wood/stone finish wall cladding tiles confirming to IS : 15622( thickness to be specified by the manufacturer), of approved make ,in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge , in skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar1:3( 1 cement:3 coarse sand) and jointing with grey cement [email protected] kgper sqm, including pointing in white cement mixed with pigment of matching shadecomplete |
| 12 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 13 | 13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 14 | od1521023/2021_2022 : Providingand fixing stainless steel (Grade304)lettermaking made ofstainlesssheet 16gauge,includingcutting, grinding, <br> Polishing,buffing andmakingcurvature ( where required) of size 0.25m*0.3m*0.05mthickand fitting letterswithnecessarySSnutsand boltsand fastenersetc. including necessaryplatformusingfabricatingand dismantlingafterfinishing work. |
| 15 | od1586249/2021_2022 : Providing and fixingGranite of any colour and shade for Nameboard, of required size laid over base of cement mortar 1:4(1 cement:4 sand)including all charges etc, complete at all levels including including lettering and fixing |
| 16 | APPENDIX-B-GATE FOR PUZHAKKATTIRI CHC |
| 17 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 18 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 19 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size |
| 20 | 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 21 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 22 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 23 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 24 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 25 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 26 | 13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 27 | od1586228/2021_2022 : Providing and fixing 1 st quality wood/stone finish wall cladding tiles confirming to IS : 15622( thickness to be specified by the manufacturer), of approved make ,in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge , in skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar1:3( 1 cement:3 coarse sand) and jointing with grey cement [email protected] kgper sqm, including pointing in white cement mixed with pigment of matching shadecomplete |
| 28 | 13.71 : Lettering with black Japan pint of approved brand and manufacture |
| 29 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 30 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 31 | od1586247/2021_2022 : providing and fixing stainless steel( Grade 304) letter making made of stainless sheet 16gauge , including cutting, grinding, polishing, buffing and making curvature (where required) of size 0.25m*0.3m*0.05m thick and fitting letters with necessary SS nuts and boltsand fasteners etc including necessary platform using fabricating and dismantling after finishing the work |
| 32 | od1586249/2021_2022 : Providing and fixingGranite of any colour and shade for Nameboard, of required size laid over base of cement mortar 1:4(1 cement:4 sand)including all charges etc, complete at all levels including including lettering and fixing |
AI Tender Summary
Tender Timeline
Jan 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender