Providing And Fixing Of Road Lighting Network Along With Creation Of 25Kva Distribution Substation And Tapping Point On Connectivity Road Connecting Phase 1St And 2Nd At Industrial Growth Centre Samba Under ( Capex Scheme )
Tender Value
22.41 Lakhs
Estimated cost
Bid Submission
25 Jan 2022
0 days left
EMD
44850
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
samba → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Fixing Of Road Lighting Network Along With Creation Of 25Kva Distribution Substation And Tapping Point On Connectivity Road Connecting Phase 1St And 2Nd At Industrial Growth Centre Samba Under ( Capex Scheme )
BOQ
| Sl. No. | Item Description |
| 1 | STEEL TUBULAR POLES:-Supply and erection of Road lighting steel tubular swaged type pole conforming to IS 2713-(Part-III)1980 Pole Designation 410 SP-12 (8 Mtr.) complete with base plate of250mm x 250mmx 6mm(LxBxW). Drilling of 25mm dia hole at 2.74 Mtrs from the bottom for entry of wire. The poleto be painted with one coat of primer and two coats of silver white aluminum paint and underground section of the pole is to be painted with one coat of primer and two coats of black enamel paint both inner and outer side. The pole is to be erected by excavation of 4.5 feet x2 feet x2 feet pole{ pit including making foundation incement concrete in the ration of 1:3:6 (1 cement :3 coarse sand :6 graded stone, 40mm dia nominal ). The foundation is to be continued upto 1 Mtr. feet above ground level around the pole tapered suitably in to the collar in round shape of 0.5 M dia. The exposed portion of the block is to be plastered properly and white washed. The job includes excavation of pole pit, refilling and removal of excavated material from site and properly disposed off, complete job in all respects. |
| 2 | LUMINAIRES:-Supplying, installation Testing and commissioning of LED fitting 60/65 watt of Havell’s or equivalent make with all allied accessories as required complete job. |
| 3 | CABLE:Supply, laying, testing and commissioning of 1.1 KV grade Aluminum conductor PVC insulated PVC sheathed, steel armoured cable, 0.75 M below ground including digging of trench 0.35 M wide 0.75 M depththrough HDPE pipe 40 mm dia (Pn8) and refilling the trench, etc as required. The job includes cost of PDPE pipe complete job. |
| 4 | a) 4 x 10 Sq. mm |
| 5 | b) 4 x 16 sq mm |
| 6 | EARTH WIRE: Supply, Laying, Connecting 6SWG G.I earth wire along with cable etc as required |
| 7 | Single Pole Bracket: Fabrication, supplying, Installation & Fixing of Double pole Bracket made out suitable dia Ms pipe 3 feet Long welded with Ms socket of Appropriatesize fitted with suitable size Nut & Bolts for fixing socket with pole & suitable for fixing of 60 Watt LED fitting. |
| 8 | Flexible Nylon Pipe:-Supply/ fixing of nylon flexible pipe ½ dia for connection Box and fitting. |
| 9 | Connection Wire: Supply/ Drawing of (2x1.5+1x1.5) Sq.mm PVC insulated multi strand copper wire from looping box up to luminaries as required. |
| 10 | Cable Looping Box:- Supply and fixing of dust and weather proof gasketted 250mm x 250mm x 200 mm deep cable looping box (nominal) size made out of 18 SWG fitted with pole with the help of 2 Nos. MS clamp (25x3mm) thick flat strip of suitable size with nuts and bolts. Complete with hinged cover locking L-Key type Bolts, earth studs suitable for poles mounted including supply and fixing of 6A MCB SP, MCB carrier and 4-way 63A terminal block fixed on suitable size and suitable for receiving PVC armoured cable complete with connections and painting etc. Complete job. |
| 11 | G.I pipes:-Providing, fixing, laying of GI pipes 50 mm dia. B-Class for road crossing etcas required complete job |
| 12 | Control Panel :-Supplying, installation, Testing & Commissioning of control panel dust vermin weather proof out does canopy type of suitable size made of 14/16 SWG MS Sheet having holes at bottom for incoming & outgoing of cables. It should be painted with one coat of primer & two coats of approved make color of synthetic Enamel paint & grouting the same. The panel consisting of following items: a) MCCB 63 AMP, 16 KA 4P -1 No.b) Phase indicator set RYB-1 setc) Automatic Timer -1 No.d) Aluminum Bus Bar- 4P -1 No.e) Contactor ML(2) for timer - 1 No.f) Toggle switch for Auto/ manual - 1 No.g) TPN 25 Amp –3 Nos. |
| 13 | Wire Mesh Shield:- Fabricated, supplying & fixing of 3 mm wire mesh shield made out of angle iron & mesh. Wire for protection to 60 Watt LED fitting on pole. It should be painted with redoxide and silver white alluminium paint and proper clamped and should be detachable for maintenance of fixture. Complete job in all respect. |
| 14 | Chemical Earthing:- Making of earthing station using chemical type 50 mm Dia G.I Earth electrode maintenance free & providing masonry enclosed with cover plate having locking arrangement as required. |
| 15 | Platform with Shed:- Construction of platform (7x7x4.5 ft) (Length x Breadth x Width) is 1.5 feet below ground level and 3 feet above the ground level in the ratio of 1:2:6 (1 cement : 2 sand : 6 graded stone aggregated 40mm nominal) size for erection of feeder pillar on platform. The job also includes construction of shed on angle iron 8 fet above the platform and covered the platform from all sides with chain link fencing fiber sheet and top withfibre sheet of required size having slop at one side with locking arrangement 4 feet on front side including painting, white washing etc. as required. |
| 16 | Supplying/Errection/Testing/ Commissioning of 25 KVA Distribution SubstationS/E/T/C of 25KVA Distribution substation consisting of following components-25 KVA Distribution Transformer 11/0 433 KVA 3 energy Level-2 Aluminium wound with filling of fresh etc. as required- 1 No. P/F of steel tubular pole 410-SP-33 9mtr long the pole shall be amount which shall be painted with red oxide & two coats of simmer paint cemented upto 5 feet in the ratio of 1:3:6 with 1 feet of Muff above the grand level with surface plastering etc. as required - 2 Nos.Gapless surge arrester 9 KV, 10KV L.A with polymer/ porcelain Housing station type-1Set11 KV G.O/DO Switch 3 3 pole 200A – 1 Set11 KV Disc insulators (Polymer/ Porcelain) complete with fitting (45 KN) – 3 No.GI Chanel/ Angle/ Flat of size including damps – 200 Kg.11 KV Pin insulators (polymer/porcelain) with pins (5 KN) – 3 No.Galvanized stay set with 50 x8 mm stay clamp, guy insulator (2 Nos), Anchor plate (200x 200 x 6 mm) Nut Bolts 2 No. turn Buckles 1.8m long 16 mm Dia meter solid GS stay rod 2 7/3.15 mm Dia GI stranded wire complete -2 Set.Wedge connector/ PG clamps – 6 Nos.P/F of 1x95 unarmored Aluminium cable with thiumbling to end terminals – 15 Mtr.Galvanized Nut & Bolts – 8 Kg.Danger plate with clamp – 1 No.G.I Barbed wire for Anti climbing- 15 Kg.3 Phase & 4 wire Prodigy meter for metering – 1 Job.P/F of 0.05 ACSR Conductor – 10 MtrP/L of Chemical Earthing–3 Nos.P/F of 25 x 5 mm G.I strip on surface or in recess for connection etc as required.Sundry items like Aluminium lugs, Jumpess Binding tape etc - LSP/F of fuse link Bus Bar on Angle iron for protection of transformer – 1 No.Providing & Fitting of insulator conductor, Disc and all allied accessoriesin tapping point – 1 No |
| 17 | Tapping Point along with HT line Line:-Providing and fitting of Tapping point for connecting/disconnecting the distribution substation along with HT line comprising of following items:-a) ASCR conductor (Rabbit) -330mtr.b) Steel tubular poles 3Noc) Pin Insulator -9nod) Disc insulator-6noe) GO switch 200Amp-1nof) Channel 100x50mm 4ft for fixing of insulator-3nog) Angle iron arm 50x4mm 4ft-6noh) Clamps-6noi) Nut bolts -50kg j) Guard nettingfor 30mtr HT line-1jobk) Misc. items required as per site requirements |
AI Tender Summary
Tender Timeline
Jan 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender