Bids Are Invited For Job No 2160 Relocatableauto Extension If Any Seller Submits Price In Last 15 Minutes, The Rawill Be Auto Extended By 15 Minutes ( A Maximum Of10 Times ) Average Turn Over Of Last 3 Years 23 Lakh ( S ) Total Quantity : 1--, KAMRUP-Assam

Bids Are Invited For Job No 2160 Relocatableauto Extension If Any Seller Submits Price In Last 15 Minutes, The Rawill Be Auto Extended By 15 Minutes ( A Maximum Of10 Times ) Average Turn Over Of Last 3 Years 23 Lakh ( S ) Total Quantity : 1--Panels. Relocatable Quick Erectable Protective Wall Baskets Galvanized Welded Mesh Frame ( 2 Cells Per Set ) Of Size ( L ) 1232Mm±10Mm X ( W ) 616Mm ± 10Mm X ( H ) 769Mm ±10Mm. The Baskets To Be Provided With Multi Wires ( At Bottom Of Mesh Panel ) And Edge Wires ( At Side Of Mesh For Better Gripping Of Spiral ) . Mesh Will Be Made Of 4 Mm ± 0.05Mm Dia Hot Dip Galvanized Low Carbon Steel Wire Conforming To Bs 1052. 145 Gsm Al-Zn Coated ( As Per Is-4826 ) Prime Quality Raw Material Conforming To Bs / En 10244-2. Wire Tensile Str Should Not Be Less Than 540 N / Mm2. Basket Frame Mesh Size 75Mm X 75 Mm. Mesh Tensile Strength Min 70% Of Wire Tensile Strength And It Should Be Powder Coated With Coating Thickness 60-80 Microns Confirming To En 10245-1 / Is-13871, Pc Spiral. Adjacent Weld Mesh Panels Are Joint By Means Of Spiral Of Legth Size 760Mm Made Of Wire Not Less Than 4Mm Dia ( ± 0.05Mm ) With Pitch Of Spiral 25 Mm ( ±2Mm ) , Circumference Of Sprial 35Mm ( Od ) ( ±2Mm ) , Tensile Strength Of Wire Min 400 N / Sqmm As Per Is Specification Of Wire Is 280, Galvanising On Wire Zn Coating 40-50 Gsm As Per Is 4826 , Joining Pins. Joining Pins Are Used At Intersections Of Two Adjacent Cells And It Fits Inside The Spiral. Mesh Wire Made Of Gi Ms Wire Of Dia 4 Mm ( ± 0.05Mm ) . Eight Nos High Tensile Joint Pins To Be Provide With Each Basket. , Geo Textile Material. Geotextile Cloth Will Be Placed Inside The Cell And Stitched In Shape Of A Basket ( L ) 1232Mm+ 0.1Mm X ( W ) 616Mm ± 0.01Mm X ( H ) X 800Mm ( ± 0.1Mm ) ( Lxbxh ) . Tensile Strength Md- 16 Kn / M & Cd-16 Kn / M As Per Is Specification En Iso 10319, Static Puncture Resistance ( Cbr Test ) 2350N As Per Is Specification En Iso 12236, Cone Drop Test ( Hole Dia ) 22 Mm As Per En Iso 13433, Permeability Vertical ( Delta H= 50Mm ) 90L / Sqm ( Mm / S As Per En Iso 11058, Opening Size 90 = 100 Um As Per Wn Iso 12956, Thickness Not Less Than 1.9Mm At 2 Kpa As Per En Iso 9863-1. The Colour Of The Fabric Will Be Approved By The Bidder

Refer document

Refer document

Refer document