|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation, trenches or drain (exceeding 1.5 m in width,or 10 sqm on plan, I/Cdressing of bottom and sides of trenches, lift upto 1.5 m including getting out the excavated soil and disposal of surplus exacavated soilas directed,within a lead of 50 m as per HSR item No. 4.12.1 |
| 2 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including lidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as ected, within a lead of 50 m as per HSR item No. 4.16.1.5 |
| 3 | Cement Concrete 1:8:16 Flooring 10.100.1 cement concrete 1:8:16 with over burnt ( Jhama) Brick cum Aggregate: 90 mm to 40 mm size in foundation and plinth as per HSR item No.10.100.1 |
| 4 | Brick work with common burent clay non- modular bricks of class designation 10 in foundation and plinth laid in cementsand morter (1:5) as per HSR item No. 7.21.2 |
| 5 | Providing,lowering, laying cutting ( cut surface to be uniformely finished), joining with rubber RCC NP2 MARKED WITH IS : 5382 and testing of SPIGOT AND SOCKETTED RCC NP MARKED WITH IS 458:1988 and special into unloading, rehandling etc. complete as per HSR item No. 20.62.8r 600 mm dia |
| 6 | 12 mm thick cement plaster ( 1:4) in fillet gola etc. complete in all respect as per approved drawing and design as per HSR item no. 11.5.3 |
| 7 | Providing fixing 450mm CI Nakka complete in are respect as per current market rate as per CADA pattern and rate approval vide CE/CADA memo no. 2565/30W dt 03.05.2016 |
| 8 | Supply of RCC pannels of required size 39*39\" at site of work as per approved drawing & design |
| 9 | Fixing of RCC pannels of required size 39*39\" at site of work as per approved drawing & design |
| 10 | Supply of RCC lid of required size 18\"dia at site of work as per approved drawing & design |
| 11 | Providing & fixing steel bar embedded plastic steps of size 263mm x 165mm of orange colour, confirming to specification in pump chambers,manholes etc., having inimum 3mm thick polypropylene polymer confirming to is:10910 encapsulated on 12mm dia ribbed steel bars per IS : 1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1 :2:4 cement concrete including carriage, loading, uploading, stacking, handling, re-handling etc., complete in all respect to the satisfaction of Engineer-in-charge HSR item No.21.28 |
| 12 | Steel work welded in built up section/framed work, incuding cutting hosting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required, |
| 13 | mortar. |
