}

Construction Of Forest Guard Hut Baroti In Baroti Beat Of Mandap Block Of Dharmapur Range Under Joginder Nagar Forest Division. Sub Head Consturction Of Site Development , Building Portion And Septic Tank., dharampur-Himachal Pradesh

Forest Department-FD has published Construction Of Forest Guard Hut Baroti In Baroti Beat Of Mandap Block Of Dharmapur Range Under Joginder Nagar Forest Division. Sub Head Consturction Of Site Development , Building Portion And Septic Tank.. Submission Date for this Tender is 17-01-2022. Septic Tank Tenders in dharampur Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

30672657
Construction Of Forest Guard Hut Baroti In Baroti Beat Of Mandap Block Of Dharmapur Range Under Joginder Nagar Forest Division. Sub Head Consturction Of Site Development , Building Portion And Septic Tank.
Open Tender
Indian
Himachal Pradesh
dharampur
17-01-2022

Tender Details

Construction Of Forest Guard Hut Baroti In Baroti Beat Of Mandap Block Of Dharmapur Range Under Joginder Nagar Forest Division. Sub Head Consturction Of Site Development , Building Portion And Septic Tank.

Key Value

Document Fees
INR 500 /-
EMD
INR 27100.0 /-
Tender Value
INR 13.51 Lakhs /-

BOQ Items

Name of Work:Construction of Forest Guard Hut at Baroti in Baroti Beat of Mandap Block of Dharampur Forest Range under Joginder Nagar Forest Division (Sub Head: C/o Site Development, Building Portion, Septic Tank ).
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm. On plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m. as directed by Engineer-in-charge complete withinall leads, lifts carriage of material and other incidentials.
2All kind of soil
3Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete withinall leads, lifts carriage of material and other incidentials.
4All kind of soil
5Proviing and lying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level complete withinall leads, lifts carriage of material and other incidentials.
61:5:10 (1Cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size)
7Random rubble masonry with hard stone in fondation and plinth including levelling up with cement concrete 1:6:12 (1 cement :6 coarse sand :12 graded stone aggrigate 25 mm nominal size) up to plinth level complete withinall leads, lifts carriage of material and other incidentials.
8Cement mortar 1:6 (1 cement: 6 coarse sand)
9Dry stone masonry (uncoursed/brought to course) with hard stone of approved quality in foundation and plinth, breast walls, retaining walls, parapet walls and abutment of culverts etc. i/c dressing of stones complete withinall leads, lifts carriage of material and other incidentials.
10filling availale excavated earth (excluding rock) in trenches, plinth, sides of foundation, etc. in layers not exceeeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 mtr. And lift upto 1.50 mtr complete within all leads, lifts carriage of material and other incidentials.
11Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete withinall leads, lifts carriage of material and other incidentials.
12All kind of soil
13Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level all kind of soils complete withinall leads, lifts carriage of material and other incidentials.
141:5:10 (1Cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size)
15Ranom rubble masonry withhard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1Cement :6 Coarse sand : 12 graded stone aggrigate 25 mm nominal size) up to plinth level with:-complete withinall leads, lifts carriage of material and other incidentials.
16Cement mortar 1:6 (1cement: 6coarse sand)
17Centering and shuttering including strutting, propping etc. and removal of form for:
18Lintels, beams, plinth beams, girders, bressumers and cantilevers complete withinall leads, lifts carriage of material and other incidentials.
19Steel reinforcement for RCC Work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and superstructure complete withinall leads, lifts carriage of material and other incidentials.
20Mild steel and mendium tensile steel bars
21Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All works upto plinth levelcomplete withinall leads, lifts carriage of material and other incidentials.
221:2:4 (1cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size
23Brick work with common burnt clay machine moulted perforated bricks of class designation 12.5 conforming to IS:2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 Cement :6 Coarse sand) complete withinall leads, lifts carriage of material and other incidentials.
24With modular bricks (MN Module)
25Half brick masonry with common burnt clay F.P.S. (non moudlar) brick of class designation 7.5 in superstructure above plinth level up to floor V level complete withinall leads, lifts carriage of material and other incidentials.
26Cement mortar 1:4 (1 cement: 4 course sand)
27Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastenres of required dia & length complete withinall leads, lifts carriage of material and other incidentials.
28Sall Wood
29Structural steel work riveted, bolted or welde in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete withinall leads, lifts carriage of material and other incidentialls.
30P/F precoated galvanised steel sheet roofing from profile sheet complete with self tapping screws
31P/F precoated galvanised steel sheet roofing Ridge Main (500-600mm)
32Proviing and fixing M.S. BP sheet 1.66 mm thick in eaves board /facia/ soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Range Officer/Engineer in Chargecomplete withinall leads, lifts carriage of material and other incidentialls.
336mm thick cement fiber board as per IS:14862
34Providing and fixing plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work) complete withinall leads, lifts carriage of material and otherincidentialls.
35filling availale excavated earth (excluding rock) in trenches, plinth, sides of foundation, etc. in layers not exceeeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 mtr. And lift upto 1.50 mtr complete withinall leads, lifts carriage of material and otherincidentialls.
36Dry stone pitching 15 cm thick including supply of stones and preparing surface complete withinall leads, lifts carriage of material and other incidentials.
37Centering and shuttering including strutting, propping etc. and removal of form for:
38Suspended floors, roofs, landings, balconies and acesss platform
39Steel reinforcement for RCC Work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and superstructure complete withinall leads, lifts carriage of material and other incidentials.
40Mild steel and mendium tensile steel bars
41Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All works upto plinth levelcomplete withinall leads, lifts carriage of material and other inciden
421:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
43Providing and laying ceramic tiles IS 15622 in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete withinall leads, lifts carriage of material and other incidentials.
44size of tiles 600X600 mm
45Providing and laying ceramic tiles glased IS 15622 in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete withinall leads, lifts carriage of material and other incidentials.
46Size of tiles 500X500 mm
4715 mm cement plaster on the rough side of single or half brick wall of mix:
48In cement Mortar 1:6
49Providing and fixing M.s. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete withinall leads, lifts carriage of material and other incidentials.
50Fixed to openings/ Wooden frames with rawal plugs screws etc.
51Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer- in-Charge complete withinall leads, lifts carriage of material and other incidentials.
52Second Class teak wood, 25mm to 40 mm tick shutters.
53Providing and fixing wire gauge shutters using galvanized M.s. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necwssary screws complete withinall leads, lifts carriage of material and other incidentials.
54Second class teak wood-35 mm thick
55Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or grades wood particle board medium density gradeI, IS: 3087 marked, including top cover of 6mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.s. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets, including fixing with 25X3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mmX40mmX40mm on both inner side of pelmet and rawl plugs 75mm long etc. all complete withinall leads, lifts carriage of material and other incidentials.
56Providing and fixing aluminium sliding dor bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete withinall leads, lifts carriage of material and other incidentials.
57300X16mm
58Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour orshade, with necessary screws etc.complete withinall leads, lifts carriage of material and other incidentials.
59200X10 mm
60150X10mm
61Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete withinall leads, lifts carriage of material and other incidentials.
62125 mm
63Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868)transparent or dyed to required colour and shade, with necessary screws complete withinall leads, lifts carriage of material and other incidentials.
64Single rubber stopper
65Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc.complete withinall leads, lifts carriage of material and other incidentials.
66125X63X4 mm
67Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:-
68New work (two or more coats) over and including water thinnable priming coat with cement primer complete withinall leads, lifts carriage of material and other incidentials.
69With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete withinall leads, lifts carriage of material and other incidentials.
70Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr./10 sqm of approved brand and manufacture
71Making plint protection 50 mm thick of cement concrete 1:3:6 (1Cement :3Coarse Sand (Zone-III): 6graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and gouted with fine sand, including necessary excavation, levelling & dresing & finishing the top smooth complete withinall leads, lifts carriage of material and other incidentials.
72Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeing 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, indluding getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. complete withinall leads, lifts carriage of material and other incidentials.
73All kind of soil
74Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level complete withinall leads, lifts carriage of material and other incidentials.
751:5:10 (1 Cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size)
76Brick work with common burnt clay machine moulted perforated bricks of class designation 12.5 conforming to IS:2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 Cement :6 Coarse sand) complete withinall leads, lifts carriage of material and other incidentials.
77With modular bricks
7815 mm cement plaster on the rough side of single or half brick wall of mix complete withinall leads, lifts carriage of material and other incidentials.
79In cement mortar 1:4
80Cement concrete flooring 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete withinall leads, lifts carriage of material and other incidentials.
8140 mm thick with 20 mm nominal size stone agg.
82Centering and shuttering including strutting, propping etc. and removal of form for:
83Suspended floors, roofs, landings, balconies and acesss platform
84Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and superstructure complete withinall leads, lifts carriage of material and other incidentials.
85Mild steel and mendium tensile steel bars
86Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All works upto plinth levelcomplete withinall leads, lifts carriage of material and other incidentials
871:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail