Construction Of Asst.Director Of Horticulture Office Building, Baliguda, Dist-Kandhamal Civil Works
Tender Value
43.86 Lakhs
Estimated cost
Bid Submission
21 Jan 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baliguda → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Asst.Director Of Horticulture Office Building, Baliguda, Dist-Kandhamal Civil Works
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials. |
| 3 | C.C.(1:4:8) with 4 c.m. size h.g. metal (crusher broken) in F&P. |
| 4 | Cement Concrete(1:2:4)with12 mm size Hard Granite Chips (Crusher broken) |
| 5 | Brick work with FLY ASH bricks inC.M(1:6) in foundation and plinth |
| 6 | 12mm thick cement plaster in C.M(1:4)over brick work including cement punning |
| 7 | R. R. H.G. stone masonry in C.M. (1: 6) in foundation and plinth works |
| 8 | Filling in foundation and plinth with excavated materialsincluding watering and ramming |
| 9 | Brick work with FLY ASH bricks inC.M(1:6) in Super structure in Ground Floor |
| 10 | Brick work with FLY ASH bricks inC.M(1:6) in Super structure 1st Floor |
| 11 | RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for ground floor |
| 12 | (a) Column base, frustum, plinth band |
| 13 | (b) Lintel |
| 14 | (c) Column and beam |
| 15 | (d) Sun shade, loft and Chajja |
| 16 | (e) Roof Slab |
| 17 | (f) Stair |
| 18 | RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for 1st floor |
| 19 | (a) Lintel |
| 20 | (b) Column and beam |
| 21 | (c) Sun shade, loft and Chajja |
| 22 | (d) Roof slab |
| 23 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in ground floor |
| 24 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in First floor |
| 25 | 6mm thick cement plaster in C.M(1:4)R CC surfaces for ground floor |
| 26 | 6mm thick cement plaster in C.M(1:4)R CC surfaces for First floor |
| 27 | 20mm thick cement plaster in C.M(1:6) over stone work |
| 28 | 16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in ground floor |
| 29 | 16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in First floor |
| 30 | 12 mm thick cement plaster in c.m(1:6) over brick masonry, out side walls ground floor |
| 31 | 12 mm thick cement plaster in c.m(1:6) over brick masonry, outside walls first floor |
| 32 | 20mm thick cement plaster in C.M(1:4) as grading Plaster in Ground floor |
| 33 | Cement washing two coats over the plastered surface in ground floor |
| 34 | Cement washing two coats over the plastered surface in First floor |
| 35 | Finishing walls withweather coat paint of approved shade two coat to give an even shade including cost of paint in ground floor |
| 36 | Finishing walls with weather coat paint of approved shade two coatto give an even shade including cost of paint in First floor |
| 37 | Paintingtwo coats to walls with Enamel Paint of approved shade on new work to give an even shade including cost of Paint in ground floor |
| 38 | Painting two coats to walls with Enamel Paint of approved shade on new work to give an even shade including cost of Paint First floor |
| 39 | Fixing of Vitrified tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles in Ground Floor. |
| 40 | Fixing of Vitrified tilesin dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles in Ground Floor |
| 41 | Fitting tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of Chequered tiles in Ground Floor |
| 42 | Fitting tiles in dadoes skirting and riser of steps on 12mm thickcement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of Ceramic tiles |
| 43 | Supply, fitting and fixing of MS grill and ventilators including painting two coats over a coat of primer including cost of transportation. |
| 44 | Priming one coat with any approved red oxide over steel work |
| 45 | Paining 2coats with any approved iron paint on new iron work. |
| 46 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154,151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter framewith 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc.complete |
| 47 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete. |
| 48 | Supplying fitting and fixing of FRP door frame of size 75X100mm including drilling holes in Masonry walls |
| 49 | Supplying fitting of Factory made single Leaf Regid FRP composite door Shutter of 32mm thick,Laminated with GRP skins with wood grain finished fabricates using UV stabilised Isopthalic Gel Coat and layer of 450gsm E-glass chopped strand mat(csm) impregnated with Orthopathalic,Polyster resin including fitting all fixtures like hings,towerbolt,handle,aldrop with cost,conveyance and taxes of all materials and labour complete |
| 50 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification |
| 51 | Providing, Fiitting and Fixing of False Ceiling with Arm Strong Silhouette main runner, Cross Tee, Wall Angle with fine fissured RH-99 board on 4 walls to be fixed by means of steel screws, PVC plug & the Arm Strong grid 2\"0\"\" x 2\"0\" suspended from ceiling etc. complete |
| 52 | Providing, fitting & fixing of premoulded decorative corner beading of Model No. C-443 of GYPSUM INDIA LTD. having cross section dimension 112 X 80MM & fixing the same by providing PVC plug, screw, cornice adhesive, fevicol etc. complete in all respect. |
| 53 | Supply, fitting and fixing of 1.5 ton Split AC Carrier 1.5 Ton 3 Star Split AC (Copper, CAS18EK3R39F0+CF183R3AC90, White) |
| 54 | Execution of a Borewell with 150mm dia PVC Casing Pipe of ASTM Sch-40 and 1.0 HP Submersible Pump with ISI mark icluding GI Column Pipe and flat cables. |
| 55 | Recessed wiring to Light point / Exhaust fan point with switch (Module) Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mmFR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non- metallic PVC flexible conduit with 5A 25 on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/HavellsN-Guard/ Great White/HPL) with all cost of material and labour etc. |
| 56 | Light Point / Exhaust Fan Point (Module)(Short) |
| 57 | Light Point / Exhaust Fan Point (Module)(Medium) |
| 58 | Light Point /Exhaust Fan Point (Module) (Long) |
| 59 | Recessed wiring to Fan point (Module) |
| 60 | Medium point |
| 61 | Long point |
| 62 | Recessed wiring to Call bell point |
| 63 | Supply & Fixing of 5 Amps. Wall socket on existing Board (Module) |
| 64 | Supply & Fixing of 5 Amps. Wall socket with witch on Separate Board(Module) |
| 65 | Supply & Fixing of 15 Amps. Switch & Socket (Module) |
| 66 | Supplying & Fixing of T.V. Socket |
| 67 | Tele Vision wiring with Co-axial cable |
| 68 | Recessed wiring to Sub-main along with the following size of PVC insulated single core multistrand copper conducter ISI marked in 20 mm dia non metalic heavy duty flexible conduct 1.6 mm in Recessed PVC conduct as required (Make -Finolex/L&T/Anchor/Havels/V-Guard) |
| 69 | 2 x 2.5 sqmm + 1x1.5 sqmm run in 25 mm dia felxiable conduit |
| 70 | 2 x 4 sqmm + 1x 1.5 sqmm run in 25 mm dia felxiable conduit |
| 71 | 2 x 6 sqmm + 1 x 2.5 sqmm run in 25 mm dia felxiable conduit |
| 72 | 2 x10 sqmm + 1 x 4 sqmm run in 25 mm dia felxiable conduit |
| 73 | 4 x 6 sqmm+ 2 x 2.5 sqmm run in 32 mm dia felxiable conduit |
| 74 | 4 x 10 sqmm + 2 x 4 sqmm run in 32 mm dia felxiable conduit |
| 75 | Supply and fixing of 25 mm dia Polythene pipe |
| 76 | Supply and fixing of 32 Amp FT / DP switch (Make-Cona/Anchor) |
| 77 | Supplying & Fixing of Angle Batten Holder / Batten Holder |
| 78 | Supplying fitting & fixing of 6 Way BDB with 6 MCB |
| 79 | 32 Amp. Double pole MCB |
| 80 | Supplying & fixing of Earth Bus Bar of 50 mm X 5 mm and 500 mm Long. |
| 81 | Supply and fixing M.S. Bracket made out of 50 x 5mm size flat 150cms long fixed horizontally on wall by grouting the same in space provided for electrical duct at an vertical distance 100 cms and having clearance of 50mm from wall surface laying pipe/wire G.I strips running earth complete with all accessories with all pants and primer. |
| 82 | Supply and fixing of junction box made of 1.22mm thick M.S. sheet and having provision of hanged door on front side and toptwo side is punched for running cable for individual flat with appropriate size fixed in theelectrical duct. |
| 83 | 100Amp TPN bus bar-300 X 32 X 3mm size |
| 84 | 200Amp TPN bus bar-350 X 32 X 6mm size |
| 85 | 400Amp TPN bus bar-400 X 50 X 6mm size |
| 86 | Supply of PVC armored cables ISI marked (Make- Glowstar/Polycab/Nicco/KEI/HPL/Mescab) (50sqmm 3 1/2 core) |
| 87 | Trenching with sand spreading and bricks laying and laying of cable in trench in 2 1/2\" depth pvc cable axceeding 35sqmm to 120sqmm |
| 88 | Supply and fixing of fan hook 16sq. mm Rodin R.C.C. roof with all accessories |
| 89 | Supply, fabrication of Electrical Rotary Panel at individual Flat of size 16” x 8” x 5” with 1.22 mm thick with front hinged door with provision of D. O. rotary main switch & cutouts with one coat of red oxide and one coat of hammer paint, |
| 90 | Supply, fabrication of electrical control panel board floor mounting type with 25 X 25 X 3mm angle for legs and for frame 5O X 5O X 6 mm flat & 1.22 mm thick sheet painted with one coat of red-oxide and a coat of hammer point with individual chamber of 200Amp TPN with 200 Amps busbar, 200 Amps cutout, 32Amps rotary main switch with 63 Amp TPN and 63Amp cut out 63 Amp MCCB, bus bar etc. |
| 91 | Supply and fixing of 320 Amp TPN switch disconnector fuse (pannel mounted type with ISI marked HRC fuse) |
| 92 | Supply and fixing of Gadan light / Gate light |
| 93 | Supply and fixing of fan hook 16sq. mm Rodin R.C.C. roof with all accessories. |
| 94 | S/F of double pole 240V isolator ISI mark complte with connection withall complete etc. (40 Amp) |
| 95 | Supplying & Fixing of Ceiling Rose |
| 96 | A.C Ceiling fan 48/56\" |
| 97 | Exhaust Fan / Wall Fan (10\"/12\" size) |
| 98 | Electronics step type Regulator |
| 99 | S/F of 15W Circular LED surface fitting (Make - Havells / Phillips/Bajaj) |
| 100 | S/F of 18W10\"x10\" square recessed fittings fitting (Make - Havells / Phillips/Bajaj) |
| 101 | S/F og 60W LED street light fittings (Make - Havells / Phillips/Bajaj) |
| 102 | S/F of 15W LED light fitting (Make - Havells / Phillips/Bajaj) |
| 103 | Supply and fixing of 6 sq mm cablefor Gardanlight /Gate light |
| 104 | Supply and fixing of A.C. Air terminals |
| 105 | Supply and fixing of standard earthing with 40mm diameter G.I. Pipe 3 meter long. 12mm diameter 15cm. holes 40mm diameter flange at top with R.C.C. earth pit chamber, masonary wall work, Alternate layer of charcoal and salt, complete with all accessories. (Earthing) |
| 106 | Extra copper flat for Earthing (25 x 6 mm) |
| 107 | Supply and fixing of 25 x 3mm size G.I. flat in both horizontal and vertical run from L.C. Air terminal at the building top to the earthing electrode in the ground G.I. flat will run along the wall surface and shall be fixed on the wall with the help of G.I. staples joints shall be made, with help of G.I. Nut and bolt. |
| 108 | Supply and fixing of 25 mm dia Polythene pipe with all cost |
| 109 | Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of PVCpipes,class- confirming to ASTM-D-1785/89(Sch-80) and pipe fittings of the following nominal bore with clamps fittings including making good the wall,ceilling and floor,testing all complite as per specification and direction of the Engineer -in-charge. |
| 110 | 25 mm dia PVC Pipe |
| 111 | 32 mm dia PVC Pipe |
| 112 | 50 mm dia PVC pipe |
| 113 | Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CPVCpipes, confirming to IS:15778 having thermal stability for hot &cold water supplay,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m specing, with jointing the pipes with CPVC solvent cement and testing the joints completeas per specification and direction of the Engineer -in-charge. |
| 114 | 20 mm dia CPVC Pipe |
| 115 | 25 mm dia CPVC Pipe |
| 116 | Supplying, fitting, fixing of50 mm dia. G I bendetc. complete |
| 117 | Supplying, fitting, fixing of50 mm dia. G I Tee etc. complete |
| 118 | Cutting grooves in pucca floors and walls for taking CPVC pipe s and making good the damages as per specification and direction of the Engineer -in-charge. |
| 119 | Cutting holes through existing brick work for taking CPVC pipe s and making good the damageswith cement morter (1:6) as per specification and direction of the Engineer -in-charge. |
| 120 | Cutting holes through existing in R.C.C. Floors and roofs upto 19 cm.for taking CPVC pipe s and making good the damageswith cement voncrete(1:2:4) as per specification and direction of the Engineer -in-charge. |
| 121 | Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Bib cock(Tapes)/CPittings of the following ISI approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge. |
| 122 | 15 mm dia CP Brass Short Body Bib cock . |
| 123 | 15 mm dia CP Brass long body Bib cock . |
| 124 | 15 mm dia CP flanges |
| 125 | 15 mmdia CP Bib Cock (2 in 1) |
| 126 | Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Stop cock / CPittings of the following IS:781-1995 approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge. |
| 127 | 15 mm dia CP Brass Stop Cock |
| 128 | 15 mm dia CP Pillar Cock |
| 129 | Supplying, fitting, fixing of 15 mm dia CP concealed stopcocketc. Complete. |
| 130 | Supplying all materils,labour,T&P and fixing Rotational moulded polithylene cylindrical vertical water storage tanks(SYNTEX)conforming to IS 12701-1996 Including cutting holes through the tank and fixing mild steel tubes and fittings and providinng extra socket and jam nuts,fixing ball valave etc,including hoisting up to a heightofextra 5 Meters above ground level and placing the tank to the required positionetc, all as per speci fication and directionof the Engineer incharge. |
| 131 | 2000 liter capacity Syntex/FC Tank |
| 132 | Supplying, fitting, fixing of 15mmdia. PVC connection pipe for pillarcock, supply mains for wash basin etc. Complete. Supplying, fitting, fixing of 15mmdia. PVC connection pipe for pillarcock, supply mains for wash basin etc. Complete. |
| 133 | Supplying all materials,labour,T&P and fitting, fixining following PVC itemsand filling of the following outside diameter conformoring to IS 13592 Type A, to walls with seal ring conforming to IS:5382,leaving 10 mm gap for 10mm thermal expansion,(1) single socket pipes as per manufactures specification testing, all complite as per specificationand directionof the Engineer incharge. |
| 134 | 75 mm dia U-PVC Soil, Waste, Rainwater pipes |
| 135 | 75 mm dia UPVCdoor Tee |
| 136 | 75 mm dia UPVCdoor bend |
| 137 | 75 mm dia UPVCplain Tee |
| 138 | 75 mm dia UPVCCowl |
| 139 | 75 mm dia UPVCplain bend |
| 140 | 50 mm dia PVC plain bend |
| 141 | 50 mm dia UPVC pipe (4 kgf/cm 2 ) |
| 142 | 50 mm dia UPVCdoor bend |
| 143 | 50 mm dia UPVCplain bend |
| 144 | 75 mm x 50 mm dia UPVCR/Socket |
| 145 | 100 mm x 50 mm dia UPVCR/Socket |
| 146 | 110 mm dia UPVC pipe (4 kgf/cm 2 ) |
| 147 | 110 mm dia UPVCdoor Tee |
| 148 | 110 mm dia UPVCdoor bend |
| 149 | 110 mm dia UPVCplain Tee |
| 150 | 110 mm dia UPVCplain bend |
| 151 | 110 mm dia UPVCCowl |
| 152 | Supplying all materials,labour,T&P and fitting, fixining ,laying in trenches High Density Polythinepipes conforming to IS-4984-1995 and specials of the following outside diameter conformoring to Class 1 to Class 3 and jointing by fusion welding method including testingas per manufactures specification testing, all complite as per specificationand directionof the Engineer incharge (Earth work in trenches measured separetly). |
| 153 | 110 mm dia H.D.Pvc Pipe |
| 154 | Supplying all materials,labour,T&P and fitting, fixining of white glazed vitreous china sqatting pan of size 580 mm x 440 mm size duly embedded in cement concrete (1:4:8) using hard granite metal 4 cm. nominal size and cement mortar (1:1),cutting the floor and mending good the damages etc,all complite as per specification and direction of the Engineer inchargr. |
| 155 | 580 mm x 440 size White glazed Virtious Odisha pattern squating pan Pan (Parry wire/Hindu stan make) |
| 156 | Supplying all materials,labour,T&P and fitting, fixining of Wash down water Closest (Europian type W.C pan) with Integral\"S\" or \"P\" trap conforming to IS 2556:Part 8-2004, to the floor with Wooden Plug And Chromium plated screws including jointingthe trap with soil pipe in cement mortar (1:1) etc,,all complite as per specification and direction of the Engineer inchargr.(Without Seat &Cover) |
| 157 | White Vitreous China EWC Pattern with \"P\" Trap |
| 158 | Supplying all materials,labour T &P Fitting of 10 liters capacity PVC L L flushing Cistern with manually controlled device(handle lever) conforming to IS :7231,etc all complite as per specification and direction of the Engineer incharge. . |
| 159 | 10 Liters P.V.C.low level Flushing Cystern |
| 160 | Supplying all materials,labour T &P Fitting of Plastic Seatand cover for wash down water closet with cromium plated brass hinges and rubber buffer etc all complite as per specification and direction of the Engineer incharge. . |
| 161 | White Plastic Seat &cover with CP Brass Hinges |
| 162 | Supplying all materils,labour, T&P fitting,fixing of Long Bowl Pattern Urinal conforming to IS 2556: Part 6-1996 includingconnectiont the Urinalof Angle back 450x375x350 mm sizes respectvely with waste pipe by means of white cement(lead) mixed with chopped hemp etc ,as per specification and direction of the Engineer -in-charge |
| 163 | Virtious China -Angle Back Urinal of 450mm x 375 mmx 350 (Parryware/Hindustan) |
| 164 | Supplying all materils,labour, T&P fitting,fixing of glazed earthenware Ladies urinal (squating plate) of size 600 mm x 350 mm conforming to IS:2556-Part-6-1995 with integral longitudinal flushing pipe including embedding the plate 25mm cement morter (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal etc ,as per specification and direction of the Engineer -in-charge |
| 165 | Ladies urinal (Virtious china sqatting plate urinal) size 600mmx350 mm |
| 166 | Supplying all materils,labour, T&P fitting,fixing of Stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1:8 cm thick, fixed in urinal partitions by cutting a chase of appropiate width with chase cutter and embedding the stone in the chase with epoxygrout or with concrete 1:2:4 etc ,as per specification and direction of the Engineer -in-charge. |
| 167 | Grinite stone Partition Wall (75 cm. x50 cm.) |
| 168 | Supplying all materils,labour, T&P fitting,fixing ofVirtious China flat Wash basin over sizes 550 mm x 400 mm with hole for pillar taps conformoing to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 169 | Virtious China flat wash basin of 550mm x400 mm(Parryware/Hindustan) |
| 170 | Supplying all materils,labour, T&P fitting,fixing ofFire clay Kitchen Sinkover sizes 600 mm x 450 mm X 250 mm with hole for pillar taps conformoing to IS 2556 : Part 5-1994 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 171 | Kitchen Sink over Sizes 600 mm X 450mm X250mm |
| 172 | Supplying all materils,labour, T & P fitting,fixing ofPVC waste pipe for wash basin or sink i.e Flexiable (Coil shaped) PVC Waste pipe 40mm dia with length not less than 700 mm with PVC waste fittings etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 173 | Flexible (coil shaped) PVC waste pipefor sink & wash basin 32 mm dia with 900 mm long waste fittings |
| 174 | Supplying all materils,labour, T&P fitting,fixing ofCP brass towel rail wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 175 | 25 mm dia x 600 mm long. |
| 176 | Supplying all materils,labour, T&P fitting,fixing of plate glass shelf with CP brass brackets wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 177 | 120 mm x600 mm |
| 178 | Supplying all materils,labour, T&P fitting,fixing of bevelled type plate glass mirroor with wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 179 | 600 mm x 450mm |
| 180 | Supplying all materils,labour, T&P fitting,fixing of Cp soap Holder standard sizewith wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 181 | Supplying all materils,labour, T&P fitting,fixing ofCP brass towel ring wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 182 | CP Brass Towel Ring |
| 183 | Supplying, fitting, fixing of2’ – 0” long CP towel rail etc. Complete. |
| 184 | 2’ – 0” long CP towel rail |
| 185 | Supplying all materils,labour, T&P fitting,fixing ofLiquid Soap Container with wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 186 | Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CP Brass Shower rose with CP revolving Shower with 15 to 20 mm inlet & 150 mm dia etc compliteas per specification and direction of the Engineer -in-charge. |
| 187 | Supplying all materials,labour and fixing of Piller taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws,shanks and back nutsof 15mm dia CP Wall mixerincluding all taxes etc complite as per direction by Engineer in charge. |
| 188 | 15 mm dia Wall Mixer Piller Tapes |
| 189 | Supplying all materials,labour and fixing of Brass Full Way Valve conforming to IS: 781-1995 of the 32 mm Full way Valves including all taxes etc complite as per direction by Engineer in charge. |
| 190 | Supplying all materials,labour and fixing of Brass Full Way Valve conforming to IS: 781-1995 of the 25 mm dia brass ball Valve including all taxes etc complite as per direction by Engineer in charge. |
| 191 | Supplying all materials, labour T&Pand constructing Inspection chamber of the following sizes with c.C(1:3:6) using 40mm size h.g. metal on bed, Ist class K.B. brickwork in c.m (1:6), moulding and shaping the channel inside andbenching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside cement flush pointing (1:3) to outside R.C.C. cover slab Inside size 760mm x 760mm x 460mm with all complete |
AI Tender Summary
Tender Timeline
Jan 11, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender