Revival And Restoration Work Of Lips Under Dharamgarh Block In Kalahandi District
Tender Value
21.83 Lakhs
Estimated cost
Bid Submission
18 Jan 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dharamgarh → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Revival And Restoration Work Of Lips Under Dharamgarh Block In Kalahandi District
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation of foundation in hard soil within initial lead of 50m & lift of 1.5m including dressing and levelling the bed etc. |
| 2 | Filling in F&P with excavated materials including well watered and rammed.(2/3 of respective earth work) |
| 3 | Filling F and P with sand, well watered and rammed |
| 4 | Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal (Crusher Broken) |
| 5 | Cement Concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) |
| 6 | RCC Concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) |
| 7 | Fly Ash Brick masonary in cm(1:6) in foundation and plinth (25cm X 12cm X 8cm size) |
| 8 | Fly Ash Brick masonary in cm(1:6) in Superstructure wrk ( 25cm X 12cm X 8cm size ) |
| 9 | 12mm thick Cement plaster in CM (1:6) over brick work |
| 10 | Cement punning over plastering |
| 11 | R.C.C. foundation and Plinth bend and footing bases of columns, mass concrete, pre-cast slabs etc. |
| 12 | R.C.C. floor and roof slabs, landings,balconies, projecting, sun shades and chajjas upto 4.3 mtr. height. |
| 13 | Labour charge for M.S. reinforcement for R.C.C. work including cutting bending, binding & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. |
| 14 | White washing 2 coats with shell lime. |
| 15 | Finishing walls with water proofing cement paint of approved shade on new work ( 2 coats ) to give an even shadeetc complete |
| 16 | Costof Iron Door (size 1.2x1.98m)&Iron Window (size 0.6mx0.75m) |
| 17 | Cost of outlet |
| 18 | Provision for foundation nut bolt |
| 19 | Provision for wiring to the Pump Chamber |
| 20 | Labour charges for writing reqd. data & information on the Brick pillar |
| 21 | Cost of 300 mm R.C.C. hum pipe( NP 3 )as per specificationsincluding laying & fitting |
| 22 | Cost of 200 mm Ø PVC. pipe (Cl-I) 2.5 Kg/cm2 to deliver water at highest counter |
| 23 | Cost of 200 mm Ø PVC. pipe (Cl-II) 4.0 Kg/cm2 to deliver water at highest counter |
| 24 | Labour charges for laying and fitting of 200 mm Ø PVC pipe |
| 25 | Cost of 160 mmØ PVC Pipe (Cl-I) 2.5 kg/cm2 |
| 26 | Labour charge for laying and fitting of 160 mm Ø PVC Pipe line |
| 27 | Cost of 160 mm x 160 mm x 100 mm ØMS Tee with accessories |
| 28 | Cost of 200 mm x200 mm x200 mm Ø PVCTee |
| 29 | Cost of 10HP Centrifugal monoblock pumpsethaving 0.028 cumec discharge and 24 Mtr. head |
| 30 | Cost of 10 HP Control Pannel with Auto star delta starter & MCB |
| 31 | Cost of 63 Amp -400 V.T.P. Main Switch confirming to IS No.4064 |
| 32 | Cost of Motor Hood made out of 18 gauge CR sheet |
| 33 | Base Plate made of MS Channel with holes |
| 34 | 6 KVAR Capacitor |
| 35 | Electrical Earthing |
| 36 | Electrical installation and energisation |
| 37 | Cost of 3x10mm2 T.D. cable |
| 38 | Cost of 4mm2 PVC Wire |
| 39 | Cost of 100 mm Ø G.I. Pipe |
| 40 | Cost of100 mmØ G.I. Bend |
| 41 | Cost of 100 mmØ C.I. Foot Valve |
| 42 | Cost of 100 mmØ G.I. Flange |
| 43 | Cost of 100 mmØ Sluice Valve |
| 44 | Cost of 100 mmØ C.I.Reflux Valve (NR) |
| 45 | Cost of 200 mmØ PVC Bend |
| 46 | Cost of 200 mm Ø PVC End Cap |
| 47 | Cost of 200 mm Ø PVC coupler (4 kg/cm2) |
| 48 | Cost of River Bank cutting & shaping for const. of P.F. |
| 49 | Cost of 160 mm PVC Equal Tee |
| 50 | Cost of 160 mm PVC End Cap |
| 51 | Cost of 160 mmPVC Coupler |
| 52 | Cost of 50 mmØ Air release valve with saddle & Raiser pipe |
| 53 | Cost of 160mm dia PVC Bend |
| 54 | Cost of 100x100x25mm G.I. Tee with Plug for priming |
| 55 | Cost of 200 mmx160 mm PVC Reducer |
| 56 | Cost of 200 mmx100 mm PVC/G.I./M.S. Reducer |
| 57 | Labour charges for delivery andfitting including fitting of priming Tee, sluice Valve, NR Valve, air release valve and riser Tee etc and installation |
| 58 | Cost of solvent cement |
| 59 | Cost of 11/0.4 KV 25 KVA Transformer (BIS Energy level -II) DPM S/S |
| 60 | Cost of 3Ph.3 W 11 KV Line with 55 mm2 AAAC on 300 Kg 9 Mtr long PSC Pole having one taping point & two cut points (Span length-60Mtr) |
| 61 | 3Ph LT line on 8M X 200Kg PSC pole with 50sqmm AB Cable(30 mtr. Span) |
AI Tender Summary
Tender Timeline
Jan 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender