|
| 1 | 16 Men FEMS | Living Shelter 16 Men (FEMS) of size 8.00 m x 5.11m upto height of 3.00m(structural steel,main column,truss,purlin, end purlin ,rafter, 12 mm ply for bunk, 18 mm ply for flooring, 2 mm thick Vinyl sheet for flooring, nut and bolts joining of truss, purling,runner and foundation bolt, fasteners, rivets,SDS,U channel,flasher, internal and external corner flasher,Tee and angle for false ceiling,wind tie, PUF Panels for walling and ceiling, roof sheet for covering and ridge cover complete all as specified in TS and RFP part-III and IV) and with followings :-(a)Fire extinguisher 2Kg - 02 Nos(b)Earthing-01 No(c)Lightening Arrester-01(d)Foundation bolt-84 Nos(e)Main door-03 Nos(f)Window-06 Nos(g) Sun shade-8 Nos(h) Sealing material(tube) - 05 Set (j) Sealing Gun - 01 No(k) Bed with cushion as specified - 16 Nos(l) Rivet pin(Packet of 1000)- 2 Nos(m)SDS screw 4\" (Full thread) - 1000 Nos All above items shall be complete all as per specified in Detailed specifications. Note: Sufficient quantity of rivets, tapping screws & star screws required for construction of shelters have to be supplied by the contractor without any extra cost.L1 bidder would be responsible to supply, Install and handover the shelters duly completed at the location of installation. Due support will be given by the field company. All machineries for assembling of shelter shall be provided at site by L1vendor. |
| 2 | Curtain rod | Curtain rod |
| 3 | Peg set | Peg set |
| 4 | Foot Scrapper | Foot Scrapper |
| 5 | Foot mat | Iron Foot Mat |
| 6 | Looking Mirror | Looking Mirror (Size 0.5x1.65m) |
| 7 | Circular Saw | Steel/wooden cutting circular saw of dia 10 inch and thickness 2mm |
| 8 | Welding Rods | Mild steel welding Rods Size 2.70x350mm, 90 pieces per packet. |
| 9 | Rivet Gun | Rivet Gun make Bosch/Hitachi |
| 10 | Sheet cutting blade | Sheet/Tile cutter blade dia 110mm |
| 11 | Fd heating device | Fd heating device (bhukhari) Make- Heatking |
| 12 | OPC Cement | Ordinary Portland Cement grade 43, IS-12269-1990, packed in 50 Kgs HDPE bags conforming to IS11652/2000. Make: ACC/Ambuja/JK. |
| 13 | Coarse Sand | Sand shall be clean, sharp, angular hard and durable free from adherent coating and shall not contain clay, mica and other impurities.The maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per IS-383-1970and grade shall comply with Zone-II to Zone III. |
| 14 | 20mm Aggregate | Stone aggregate shall be crushed stone 20mm graded conforming to IS-383 1970 and shall be clean hard tough, durable and of uniform quality throughout.The aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities. |
| 15 | Casing Capping | Casing capping double locked box type 1½” x 6’ long with all fittings/fixtures,medium grade with accessories, with ISI marked, make : Diplast/Regal/Vimco plast. |
| 16 | 18W tube light | 18 watt decorative ultra slim square profile LED lighting fixture with high lumen output environmental friendly efficient ready to use pack (LED 6500K) complete set with LED tube rod and all necessary fittings.Make : Anchor/Havells/Philips with ISI mark |
| 17 | Switch 15A | Switch piano flush type15 Amp, socket multi purpose 5/15 Amp Piano Type with gang box Make Anchor/Havells/Phillips with ISI mark. |
| 18 | Switch 5A | Switch piano flush type 5 Amp, socket 3 pin, 5 Amp with gang box. Make Anchor/Havells/ Phillips with ISI mark. |
| 19 | MCB 20A | 20 Amp MCB box, single pole Make-C&S / Havells/L&T |
| 20 | MCB 16A | 16 Amp MCB box Make-C&S / Havells/L&T |
| 21 | MCB 6A | 6 Amp MCB box Make-C&S / Havells/L&T |
| 22 | Bulk head 60W | Bulk head fitting 60W. Make Havells/ Crompton/ syska/ wipro |
| 23 | Exhaust Fan | Exhaust fan with louver size 150 x 150mm.Make Havells/CG Baja |
| 24 | Change over switch double pole ( 03CHAN Amps TP | Change over switch double pole ( 03 Phase) 100 Amps TPN Off load, make Havells/ L&T/SIEMENSconforming to IS /IEC-60947-1 & 3 |
| 25 | 2.5 Sqmm wire | PVC single core, 2.5 Sqmm (Roll of 90mtr) copper wire Make Havells/Anchor/Finolexwith ISI mark. |
| 26 | 1.5 Sqmm wire | PVC single core, 1.5 Sqmm (Roll of 90mtr) copper wire Make Havells/Anchor/Finolex with ISI mark. |
| 27 | Ceiling Rose | Ceiling Rose three terminal with ISI mark,230V grade.Make : Anchor/Havells/Philips/Bajaj |
| 28 | Gang box 2 switch | Gang Box (2 switches, 5 Amps), heavy duty,Make : BHEL/ABB/SSk with ISI mark |
| 29 | Gang box 1 Switch | Gang Box (1 Switch, 5 Amps), heavy duty Make : BHEL/ABB/SSk with ISI mark |
| 30 | square box PVCPVC | PVC square box with ISI mark |
| 31 | screw 25mm | Screw 25mm (200 No) |
| 32 | screw 50mm | Screw 50mm (50 No) |
| 33 | Insulation Tape | Tape Insulation Roll |
| 34 | Distribution box | Factory made sheet distribution board 12 way, powder coated double door, protection class 1P-42 confirming to IS-13032: BS-5484 with minimum 200 Amp copper bus bar of under mentioned ways, make : Havells/L&T/Philips |
| 35 | Switch piano 5A | Switch Piano flush type 5 Amp, 230 Volt, ISI markMake : Anchor/Havells/Philips/Bajaj |
| 36 | 16 Sqmm wire | 16 Sqmm three core copper Armoured cableIS 7048(part-I) 88 amended with ISI mark . Make : Havells/ Finolex |
