Providing And Laying Mss With Seal Coat, Rs-1 Bitumen Emulsion And Dense Bitumen Macadam With Sensory Paver Machine In Parkings Of Sector-20, Ward No-14, Panchkula, Panchkula-Haryana
TDR : 30643120
Tender Notice
BOQ
Expired
Panchkula
Haryana
Providing And Laying Mss With Seal Coat, Rs-1 Bitumen Emulsion And Dense Bitumen Macadam With Sensory Paver Machine In Parkings Of Sector-20, Ward No-14, Panchkula
Name of Work:Providing and laying MSS with Seal Coat, RS-1 Bitumen Emulsion and Dense Bitumen Macadam with sensory Paver Machine in Parkings of Sector-20,Ward no-14,Panchkula
Sl. No.
Item Description
1
-Tack Coat (16.11.2021)- Providing and applying tack coat using hot straight run bitumen of grade VG 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.30 Kg/sqm to the satisfaction and directions of Engineer-in-charge.
2
-PSSC (16.11.2021)- Analysis of Rate for Providing and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen VG-10 @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications to the satisfaction and directions of Engineer-in-charge
3
-DBM (16.11.2021)-Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 40-75 mm average compacted thickness with bitumen of grade VG-40 @ 4.5 % (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity
4
-MSS (16.11.2021)- Providing and laying mix seal surfacing with bitumen of grade VG-30 @ 2.2 KG per Sqm to the satisfaction and directions of Engineer-in-charge
5
-RSBE (16.11.2021)- Providing and applying Rapid Setting bitumen emulsion conforming to 15:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. With rapid setting bitumen emulsion (RS-1) On bituminous surface @ 0.45Kg/Sqm to the satisfaction and directions of Engineer-in-charge.
6
-MSS (16.11.2021)- Providing and laying 25mm mix seal surfacing (MSS) with bitumen of grade VG-30 @ 2.2KG per SQM to the satisfaction and directions of Engineer-in-Charge
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
