Renovation Of Ground Floor And Construction Of Two Unit Guest House At First Floor In Town Hall Nagar Chakulia Under Chakulia Nagar Panchayat East Singhbhum
Tender Value
47.15 Lakhs
Estimated cost
Bid Submission
17 Jan 2022
0 days left
EMD
94313
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chakulia → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Ground Floor And Construction Of Two Unit Guest House At First Floor In Town Hall Nagar Chakulia Under Chakulia Nagar Panchayat East Singhbhum
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.Upto and including 12mm dia. |
| 3 | Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. |
| 4 | Reinforced cement concrete work in beam, suspended floos, above plinth level up to floor five level, excluding the cost of centering shuttering, finishing and reinforcement, with 1:1.5:3 (1cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size). |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 6 | Lintels, beams, plinth beam girders, |
| 7 | Columns, pillers, Piles; |
| 8 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 9 | Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l. |
| 10 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required0.80 mm thick with zinc coating not less than 275 gm/m² |
| 11 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275 gm/m² |
| 12 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete: Hot finished welded type tubes. For blue profile sheet (Wall + Roof) including all materials, T&P for completion of work etc.Including gate |
| 13 | Pressed steel door frame |
| 14 | Supplying , fitting and fixing 38 mm thick good quality , well dressed and well seasoned Teak wood 1/3rd panneled and 2/3 glazed shutters in doors and windows with 25 mm thick pannels with one side plain and another side chamfered with Aluminium fittings such as hinges, sliding doors, bolts, tower bolts, handles or rings, hooks and eyes cleats, sand blocks as per schedule and 3mm thick plain glass panes fitted with teak wood beads and taxes all complete as per building specification and direction of E/l. |
| 15 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 16 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)15.48 m2 @20Kg/m2 |
| 17 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS; 15622/ ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement morter 1:4 (1 cement : 4 coarse sand), jointing with graycement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of Tile 600x600 mm. |
| 18 | Providingandlaying20mmthickwhitemakrana marble stone slab flooring of approved quality over 19mm. thick base of lime mortar (1:1:1) ( Lime putty : surkhi:coarsesand)laidandjointedwithwhite cement slurry including rubbing and polishingto granolithic finish with approved quality of carborandum stoneincludingcostofcuring,taxesandroyaltyall complete as per building specification and direction of E/I. 300x600mm. |
| 19 | Providing and laying 6mm precast white glazed tiles in walls over12mmcementmortar (1:3)and jointed withgrey cement slurry flush pointed withwhite cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l. |
| 20 | Providing 12mm thickcement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 21 | Providing 12 mm. Flat pressed particle board ceiling with 120X60mm Sal wood beams at 122 cm. centers all complete as per approved drawing, building specification and direction of E/l. |
| 22 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l. Area vide Item no 17 B |
| 23 | Finishing wall with Premium Acrylic Smooth exterior paint of required shade on new work in two or more coats applied @ 1.43 ltr./10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kgs/ 10 sqm. including scaffolding and taxes all complete as per building specification and direction of E/l. |
| 24 | Providing one coat of primer over a coat of red lead paint over new steel surface including preparing the surface after cleaning removing dust, dirt, scales smokes and grease and cleaning the surfaceincluding cost of scaffolding and taxes all complete as per building specification and direction of E/l. |
| 25 | Providing two coats of synthetic enamel paint of approved shade and made over steel surface including cleaning the surface thoroughly including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/l. |
| 26 | Providing Tor steel reinforcement of 10mm.,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500 |
| 27 | Total RCC Qty. vide item No. 2 & 3 = 17.56 m3 @90Kg/M3= 1.58 MT |
| 28 | (a) 60% Qty 8mm & 10mm |
| 29 | (b) 40% Qty 12mm & Above |
| 30 | (c) |
| 31 | ELECTRICAL WORK |
| 32 | Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FRPVC insulated copper conductor single corecable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S box and earthin. |
| 33 | Wiring for light/power plugwith 2x 4 sq.mm FR PVC insulated, copper conductor, single core cable in and surface/recessed PVC conduitalong with 1 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as requried . |
| 34 | Wiring for circuit / sub main wiring alongwith earth wire with the following sizes ofPVC insulated, copper conductor , single core cable in surface/ recessed PVC coduit as required. |
| 35 | 2X1.5 sq mm+1X1.5 sq mm |
| 36 | 2X2.5 sq mm+1X2.5 sq mm |
| 37 | 2X6 sq mm+1X6 sq mm |
| 38 | S/F 3 pin, 5amp. Ceiling rose on the existing junction box / wooden block including connectionetc.as reqd. |
| 39 | S/F brass battan / angle holder includingconnection etc.as reqd. |
| 40 | Installation testing and commisioning of prewired, flourescent fitting of all type complete with all accessories and tubes etc. Directly on ceilling / wall including connections with 1.5 sq mm FR PVC insulated, copper conductor, single core cable and earthing. |
| 41 | S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required . |
| 42 | 20 mm PVC coduit. |
| 43 | 25 mm PVC coduit. |
| 44 | Supplaying and fixing following piano type switch/ socket on the existingswitch box / cover including connection etc. as reqd. |
| 45 | 5/6 amps switch |
| 46 | 5/6 amps socket outlet |
| 47 | Supplying and fixing metal box of following sizes(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as reqd. |
| 48 | 100mmx100mmx60mm deep |
| 49 | 126 mm x 277 mm x 61 mm deep |
| 50 | Supplying and fixing of following waysingle pole & neutral, sheet steel , MCB distribution board 240 volts, on surface /recess , complete with loose wire box, terninal blocks, duly prewired with suitable size FR PVC insulated copper conductor upto the |
| 51 | 8 way double door. |
| 52 | Supplying and fixing 5 amps to 32 amps, rating, 240 volts, \"B\" series, maniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required . |
| 53 | (a) Single pole |
| 54 | (b) Single pole & neutral |
| 55 | (c) Triple pole . |
| 56 | Earthing with GI earth pipe 4.5 mtr long 40 mm dia including accessories and providing masonary inclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as reqd. |
| 57 | Suppying & laying 8 SWG copper wire at 0.50 mtr below ground level for conductor earth electode including soldering etc .as reqd. |
| 58 | Providing of 50 sq mm x 3.5core alluminiumarmoured cable . |
| 59 | Suppying & Fixing of double door, 8way, 125A Loadline distribution board :- 8 WAY (4 + 24) DOUBLE DOOR HORIZANTAL TYPE |
| 60 | SANITARY WORK |
| 61 | Supplying,fitting and viterous white glazed earthen ware I.W.C. of parry/Hindustan of any other I.S.S. approved make100 mm H.C.I \"P\" trap 15 litre c.i pull and let go flushing system of names or other I.S.S equivalent make complete with all fitting c.i or c.c brackers 32mm alkathene/pvc telescopic flush pipe about 2m long with one brash coupling and clams G/I chain andpull including supplying and fixing a pair of viterous white glazed earthenware ware footrest to be fixed in floor 15mm C.I.body brass spindle stope cock of weight not less than 50gms 15mm P.V.C connection pipe 450mmlong abd tge exposed pipe and cistern with two coats of approved paint over a coat or red oxied two coat of |
| 62 | Supplying fitting and fixing viterous white glazed earten ware wash hand basin of parry or hindustan or any other I.S. approved make supported on pointed C.I. or Rs (32 M.C.I brass west 15mm dia C.I body brass spindle cock of approved quality of weight not less than 350gms 32mm P.V.C.waste pipe 750mm long with brass coupling at one end |
| 63 | Providing and fixing chloronited polyvinyl chioride (CPVC) pipe, having thermal stablity for hot & cold water supply, including all CPVC plain & brass threaded fittings,fixing the pipe with clamps at 1.00m spacing, this includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same |
| 64 | 15 mm dia |
| 65 | 20 mm dia |
| 66 | Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) for hot & cold water supply with clamps 1.00 meter specing with complete job. (External work) |
| 67 | 25mm dia |
| 68 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt not less than 350gms) with extra socket all complete as per specification and direction of E/I. |
| 69 | Providing & fixing brass stop cock of approved quality as specification and direction of E/I. |
| 70 | (a) 15 mm dia. |
| 71 | Providing and fixing on wall face unplasticised Rigid PVC moulded fitting/accessores for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming |
| 72 | Coupler - 75mm dia |
| 73 | 110 mm dia |
| 74 | Single Tee with - 75x75x75 mm |
| 75 | 110x110x110 mm |
| 76 | Bend - 75 mm bend |
| 77 | 110 mm bend |
| 78 | Plain Shoe - 75 mm Shoe |
| 79 | 110 mm dia |
| 80 | Providing and laying 110 mm dia PVC pipe for outlet of water to outlet drain including all accessories i.e. solvent cement, clamp, ring, sockets etc. (Suprememake) |
| 81 | Providing and fixing PVC pipe fitting with allaccessories. |
| 82 | (A) 110 mm Single Tee W/O Door |
| 83 | (B) 110 mm Plain Band |
| 84 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including coast of scaffolding all complete as per direction of E/I. |
| 85 | labour for scrapping old paint with paint remover and below lamps as required on wooden or steel surface includind cost of all labour and materials and scaffolding all complete as per building specification and direction e/i. |
| 86 | Providing and applying plaster of pares putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 87 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per buiding specification of E/I. |
| 88 | Erection of Steel tablor pole |
| 89 | Supply for 7 mtr. Octagolan Hot dipped galvanished pole (BOP-7030) with top dia 70mm. Bottom dia 130mm & made of 3mm thick sheet\" base plate dimension 200x200x12mm do…do…all comlete job. |
| 90 | Supply of 0.5mm single arm suitable for 70mm Top |
| 91 | S.I T.G of floowing rating LED street lighting luminarie with pressure die cast housing and tough end glass cover, IP 66 protection, luminous efficancy > 100LM/W with lens in existing pole/pipe for supply voltage 100-270 V AC, 50Hz, do-do- all complete job as per direction of E/I. |
| 92 | 90/100w LED Street Light |
| 93 | Supplying of 2.5 sq mm electrical cable ISI Marked, FR LS PVC insulated single core copper conductor cable |
| 94 | 6 amps to 32 amps, rating, sp MCB \"C\" series 10 KA breaking capacity Erection of the above panel of suitable foundation including all mater |
| 95 | Feeder Pillar for Street Light with timer |
| 96 | Modular G.I Box for 12 Modul |
| 97 | providing and fixing spiral rope light on electrical Pole (18x18) |
| 98 | Providing & Laying factory made chamfered edge cementcconcrete paver blocks in footpath, parks, lawns, drive ways or light traffice parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-charge. 60mm thick cement concrete paver block of M-30 grade with approved colour, design & patter. |
| 99 | CARRIAGE OF MATERIAL |
| 100 | Brick[Lead-1+7 K.M.] |
| 101 | Coarse Sand |
| 102 | Stone Chips |
| 103 | Total |
| 104 | Less DSR Item |
| 105 | Total |
| 106 | Add GST @ 12% |
| 107 | Total |
| 108 | Add Labour Cess @1% |
| 109 | Total |
| 110 | Add DSR Item |
AI Tender Summary
Tender Timeline
Jan 08, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender