Bids Are Invited For Working Bench2.5 M X 1.20 M X 0.75 M - 164.2 The Overall Size Of The Work Bench Shall Be 2500Mm ( W ) X 1200Mm ( D ) X 750Mm ( H ) 164.3 It Is Designed Such That It Looks Minimal Yet Takes Care Of Every Little Detail., Thane-Maharashtra
TDR : 30635563
Tender Notice
Corrigendum Details
BOQ
Expired
Thane
Maharashtra
Corrigendum : Bids Are Invited For Working Bench2.5 M X 1.20 M X 0.75 M - 164.2 The Overall Size Of The Work Bench Shall Be 2500Mm ( W ) X 1200Mm ( D ) X 750Mm ( H ) 164.3 It Is Designed Such That It Looks Minimal Yet Takes Care Of Every Little Detail.
164.2 The overall size of the Work Bench shall be 2500mm (W) x 1200mm (D) X 750mm(H) 164.3 It is designed such that it looks minimal yet takes care of every little detail. The understructure of this system comprises of leg assemblies and cross connectors. Over this matrix of legs and cross connectors, the work surfaces are fixed 164.4 Components 164.4.1 Main Leg Assembly: The main legs used in the entire system are fabricated by CO2 welded MS tube of section 50 mm x 50 mm x 5 mm thick (as per IS: 7138 ERW). This shall be powder coated with average 50 to 60 micron thickness of epoxy powder coating, as per approved shade. This shall be connected to the cross members & to the work surface 164.4.2 Cross Connector These are the supporting members which span across the leg assemblies and form the understructure of workstation. These shall be fabricated by CO2 welded MS tube of section 50 mm x 50 mm x 5 mm thick (as per IS:7138 ERW) 1 42.4.3 Worksurfaces: 164.4.3.1 Worktop 25 mm Thick laminated with PVC edge band. 164.4.3.2 Work top shall be made of 25mm thick & 1 mm thicl formica laminated Ply wood Top grade (As per IS: 12823). Bottom shall have a backing laminate of minimum 0.6mm thickness. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC Edge band glued with hot melt EVA glue. 164.4.3.3 Underside of the work surface shall be screwed to cross connectors and leg assembly. 164.5 Finish: 164.5.1 Epoxy Polyester Powder to the thickness of minimum 50 – 60 microns (+/-10). 164.5.2 Process: The body including understructure, framework, legs, storage pedestal including fittings involves an 8 step powder coating process consisting of antirust surface treatment viz.
2
Metal Rack100cm x 150cm x 45cm
168.2 Size - 100cm x 150cm x 45cm 168.3 Type - Angle Frame 168.4 Material - Mild Steel Slotted Angle Percolated CRC Sheet 168.5 Surface Finish Powder Coated 168.6Load Capacity per layer (Kg) 100-150 Kg 168.7 Fitting Adjustable with nut bolt
3
Wiring Board3-meter x1 meter with 0.5 meterprojection on the top
165.1 Size - 3 meter x1 meter with 0.5 meter 165.2 With projection on the top Accessories Item
4
Lockers with drawers
12.2 Confirming to IS CODE – 513 (2008), 13871 (1993)12.3 TheThe overall size of the storage shall be 1520mm (W) x 450mm (D) x 1830mm (H). 12.4 There shall be 4 units of 6 Door Lockers of equal dimensionsCombination:12.5.1 6 Door Base Unit (Size-380mmW)- one number12.5.2 6 Door Add On unit (Size-380mmW)- Three number 12.6 Construction:12.6.2 Overall Construction shall be 0.6mm thick CRCA confirming to IS:513 -2008grade.12.6.3 Shelf should have uniform load carrying capacity up to 35Kg.12.6.4 Handle-Aesthetically appealing Snap fit ABS plastic handle.12.6.5 Label Holder-Plastic label holder should be provided for identification.12.7 The locking mechanism shall be provided for individual compartment.12.8.1 Epoxy Polyester Powder in fire retardant paint coated to the thickness ofminimum 50 – 60 microns (+/-10).12.8.2 Process:
5
Rubber mat2’ x 4’ x 1”
90.2 Size 2’ x 4’ x 1) 90.3 Material- Synthetic Elastomer 90.4 Insulation Resistance : 100000 M Ohms min. 90.5 Leakage current : 10 mA. Max. 90.6 Class A, Working Voltage 3.3 KV 90.7 Di-Electric Strength 30 KV 90.8 Confirming to IS-15652:2006
6
safety belt. Standard size
93.2 Materials 93.2.1 Webbing All belts and harnesses shall be made from nylon or other synthetic materials, such as polyester. The material shall have a uniform thickness and uniform width. The waist belt, shoulder straps, hoisting straps, pole straps and all types of safety belts and harnesses shall be made from nylon/polyester webbing. The test specimen shall be of entire cross section whose minimum width and thickness should be 40 mm and 3 mm respectively. All the materials used in the production of webbing and rope shall pass the flammability tests as given in Annex A. 93.2.2 Threads for Sewing Threads for sewing the load bearing components shall have similar physical and chemical properties to that of the materials being sewn. Number of stitches shall be not less than 3 per cm and the type of thread shall be synthetic fibre such as nylon, polyester etc. The threading shall be of different colour from that of webbing in order to facilitate visual inspection. 93.2.3 Rivets and Washers All rivets and washers if used for joining the various sections shall be made from copper. 93.2.4 Life Line/Safety LineOnly nylon, polyester or synthetic fibre shall be used. The breaking load shall be a minimum of 19.6 kN (or approx 2 000 kg) when tested in accordance with test method reference. 93.2.5 Working at height The length of lanyard shall not be more than 3 m in length subject to the condition that free fall shall not be more than 1.8 m
7
RCC Pole with accessories (MS angleiron, ‘C’ clamp, stay insulator etc.)and materials6 Mtr
RCC Pole with accessories (MS angle iron, ‘C’ clamp, stay insulator etc and materials 6 Mtr Accessories Items
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
