Procurement, Rate Contract And The Supply Of Medical Equipment For Different Govt. Institutions Of Bihar- 1 Bed Should Be Electrically Operated Backrest, Height, And Knee- Break Adjustment 2 Should Have Electrically Operated Trendelenburg /Reverse Tre, Patna-Bihar

Procurement, rate contract and the supply of medical equipment for different govt. institutions of bihar- 1 bed should be electrically operated backrest, height, and knee- break adjustment 2 should have electrically operated trendelenburg /reverse trendelenburg tilt (±12º) 3 under bed clearance to be 130 mm or more. 4 should have four sectional mattress with rexine cover, foam density should be 40 or more. 5 70+_5° backrest for upright/ chest imaging. 6 side rails should be split type made from abs injection moulding with easy to lower by sideways swing (tuck-away) to save space between the icu beds. 7 bed should have integral two pieces each side split safety sides with zero transfer gap. 8 should have one button cardiac chair position. 9 bed should have dual sided drainage bag holders. 10 bed should have castors of size 5 inches or more. 11 bed should be provided with telescopic iv rod one piece. 12 bed should have lockout switches on attendant control pendent 13 bed should have angle indicator for backrest. 14 bed should have removable/bending head and foot end panels. 15 bed should have locking mechanism for head and foot panels 16 bed should have zero transfer gap 17 bed should have linked braking / steering systems with four braking castors 18 should have 125mm+/-10% single wheel castors. 19 the bed should have following dimensions height range- 46+/-10% – 76+/-10% cm overall length- 220 cm or more overall width- 980 mm or more platform size- 85x 199 cm or more 20 corner bumper and iv socket should be integrated. 21 bed should have mattress stopper for improving safety and better mattress positioning. 22 us fda (510k) /eu-ce (notified body) / bis approved model should be offered. 23 break bar should be available for breaking mechanism 24 safe working load of 170 kg or more. swl means bed should operate while 170 kg weight on bed and all movement should be functional. 25 bed should have corner buffers for protection. 26 electrical safety standard power in 220-240 v ac 50/60 hz, electric shock protection; class 1, at least mattress should be washable. name of equipment – hfnc 1 device should have integrated flow generator to deliver flows from 2 to 60 litres. 2 integrated air/oxygen blending and fio2 monitoring from 21 to 100%. 3 oxygen sensor does not require in field calibration. 4 visual and audible alarm indication for tube disconnects leaks, tube blockages and water out hardware fault with error codes. audible power failure alarm. 5 device should have thermal disinfection mode to minimize contamination. 6 heated tube for sterilization of device should be provided. 7 us fda/ european ce(issued by notified body) approved model should be offered. 8 machine should be installed on mounting tray and pole with castor c& iv hook.

Refer document

Refer document

Refer document