|
| 1 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms, liftupto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a leadof 50 m.-All kinds of soil |
| 2 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 3 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level:1:3:6 ( 1 Cement: 3 fine sand : 6 graded stoneaggregate 20 mm nominal size) |
| 4 | Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor fivelevel excluding cost of centring, shuttering, finishingand reinforcement- 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishingand reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 6 | Centering shuttering including struttings, propping etc.and removal of form work for: i)Columns, Pillars, Piers, Abutments, Posts and Struts withshuttering ply |
| 7 | ii)Weather shade, Chajjas, corbels etc., including edges |
| 8 | iii)Lintels, beams, plinth beams, girders, bressumers andcantilevers with wooden plank |
| 9 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 10 | First class brick work in foundation and plinthincluding cost of all materials as required complete:In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 11 | First class brick work in superstructure above plinthlevel & upto floor-five level including cost of allmaterials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 12 | Half brick masonry work with first class bricks insuperstructure upto floor five level including cost ofall materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 13 | 12 mm cement plaster of mix Cement mortar 1:4 (1 cement : 4 fine sand) |
| 14 | Neat cement punning. Cement mortar 1:4 (1 cement : 4 fine sand) |
| 15 | Providing and laying cement concrete 1:2:4 (1 cement : 2fine sand : 4 graded stone aggregate) flooring finishedwith a floating coat of neat cement including cementslurry, rounding of edges and strips etc. complete. 40 mm thick with 20 mm stone aggregate |
| 16 | Providing and laying polished vitrified floor tiles indifferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to IS : 15622 of approved make in all colours, shades over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. Size of tile 60x60 cm |
| 17 | Supplying and fixing rolling shutters of approved make,made of required size M.S. laths interlocked togetherthrough their entire length and jointed together at theend by end locks mounted on specially designed pipeshaft with brackets, side guides and arrangements forinside and outside locking with push and pull operationcomplete including the cost of providing and fixingnecessary 275mm long wire springs grade No.2 and M.S.top cover of required thickness for rolling shutters &with handles, hold fast including embedding in cementconcrete of required grade required for fixing in position,all necessary fittings, including applying of approvedsteel primer etc. complete as required:- 80x1.20 mm M.S. laths with 1.20 mm thick top cover. |
| 18 | Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sectionsand other sections of approved make conforming toIS: 733 and IS : 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up ofgaps at junctions, i.e. at top, bottom and sides withrequired EPDM rubber/neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred andjointed mechanically wherever required including cleatangle, aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as perarchitectural drawing and the direction ofEngineerincharge. (Glazing and paneling and dashfasteners to be paid for separately) :- a) For fixed portion of approved quality:- i)Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15) |
| 19 | b) For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and makingprovision for fixing fittings wherever required includingthe cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately ):-i) Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 20 | Providing and fixing 12 mm thick prelaminated threelayer medium density (exterior grade ) particle boardgrade-I, type II conforming to IS : 12823 bonded withphenol formaldehyde synthetic resin, of approved brandand manufacture in panelling fixed in aluminium doors,windows, shutters and partition frames with C.P. brass /stainless steel screws all complete as per architecturaldrawing and the direction of Engineer-in-charge :- a) Prelaminated particle board of approved quality withdecorative lamination on one side and balancinglamination on other side |
| 21 | Filling the gap in between aluminium frame and adjacentRCC/brick work by providing weather silicon sealantover backer rod of approved quality etc. complete as perarchitectural drawing and direction of the Engineer-incharge:- (i) Upto 5 mm depth and 5 mm width. |
| 22 | Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the directionof Engineer-in-charge (Cost of snap beading shall be paidin basic item) :- a) With float glass panes of 5.5 mm thickness ( weight notless than 13.50 kg / sqm ) |
| 23 | Providing and fixing 100 mm brass locks (best make ofapproved quality) with 6 levers without pair of handlesfor aluminium doors including necessary cutting andmaking good etc. complete as per direction of Engineerin-charge. |
| 24 | Providing and fixing aluminium round shape handle ofouter dia 100 mm with SS screws etc. of approvedquality complete as per direction of Engineer-in-charge:- a)Anodised aluminium of grade AC 15 ) |
| 25 | Providing M.S. Piano hinges ISI marked IS : 3818finished with nickel plating and fixing withnecessary screws etc., complete a)Overall width 50 mm. |
| 26 | Providing and fixing ISI marked aluminium butthinges anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed torequired colour or shade with necessary screws etc.complete: i) 100x75x4 mm |
| 27 | Providing and fixing aluminium tower bolts ISImarked anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed torequired colour or shade with necessary screws etc.complete : i) 200x10 mm |
| 28 | Providing and fixing aluminium hanging floor doorstopper ISI marked anodised (anodic coating not lessthan grade AC 10 as per IS : 1868) transparent ordyed to required colour and shade with necessaryscrews etc. complete i) Twin rubber stopper |
| 29 | Providing and fixing bright finished brass 100 mmmortice latch and lock ISI marked with six levers anda pair of anodised (anodic coating not less than gradeAC 10 as per IS : 1868) aluminium lever handles withnecessary screws etc. complete (Best make ofapproved quality) |
| 30 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wroughtframed and fixed in position i) Karai wood |
| 31 | Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shade[Payment shall be made after submission of TestCertificate issued by the Manufacturer] : New work ( two or more coats) over and including waterthinnable priming coat with cement primer. |
| 32 | Finishing walls with water proofing cement paint ofrequired shade of approved brand and manufacture[Payment shall be made after submission of TestCertificate issued by the Manufacturer] : New work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 33 | Tack Coat Providing and applying tack coat with bitumenemulsion (RS-1) using emulsion distributor at therate of 0.20 to 0.25 kg per sqm on the preparedbituminous surface cleaned with Hydraulic broomas per MoRD Technical Specification Clause 503.as per MoRD Technical Specification Clause 503 |
| 34 | Bituminous MacadamProviding and laying bituminous macadam with hot mixplant using crushed aggregates of grading as per Table500.4 premixed with bituminous binder, transported to siteupto a lead of 1000 m laid over a previously preparedsurface with paver finisher to the required grade, level andalignment and rolled to achieve the desired compaction asper MoRD Technical Specification Clause 504 i. With Viscosity Graded Bitumen of VG-30. |
| 35 | Bituminous Concrete Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average outputof 75 tonnes per hour using crushed aggregates ofspecified grading, premixed with bituminous binder @ 5.4to 5.6 per cent of mix and filler, transporting the hot mixto work site, laying with a hydrostatic paver finisher withsensor control to the required grade, level and alignment,rolling with smooth wheeled, vibratory and tandem rollersto achieve the desired compaction as per MORT&Hspecification clause No. 509 complete in all respects. |
| 36 | Road marking strips (retro-reflective) of specified shade/colour using Hot Applied Thermoplastic material withReflectorising Glass Beads on Bituminous Surface Providing and applying 2.5 mm thick thick road markingstrips (retro-reflective) of specified shade/ colour using hotthermoplastic material including reflectorising glass beads@ 250 gms per sqm area by fully/ semi automaticthermoplastic paint applicator machine fitted with profileshoe, glass beads dispenser, propane tank heater andprofile shoe heater including cost of cleaning the roadsurface of all dirt, seals, oil, grease and foreign materialetc, thickness of 2.5 mm is exclusive of surface appliedglass beads as per IRC:35. The finished surface to belevel, uniform and free from streaks and holes as perMoRT&H Technical Specification Clause 803. |
| 37 | Solar Powered Road Markers (Solar studs) Providing and fixing Solar Powered Road Markers (Solar studs) ofspecified size to meet the requirement of technical specificationclause 804.6 made of aluminium alloy and poly carbonatematerial which shall be absolutely weather resistant and shallsupport a load of 13.635 tonne tested in accordance with ASTMD 4280, of appropriate color & water resistant to meet therequirement of IP 65 in accordance with IS: 12063:1987category 2 for protection against water ingress. It shall havesuper bright LEDs of flashing rate not less than 1Hz having a lifeof not less than three years. The slope of retro-reflective surfaceshall be 35 (± 5) degrees to base. The studs shall be fixed to theRoad surface in accordance with technical specification clause no.804.7.2 using the adhesive conforming to IS or as per procedurerecommended by the manufacturer complete and as per directionof Engineer-in-Charge and in field performance as per technicalspecification clause no. 804.7.3. |
| 38 | Providing and fixing hard drawn steel wire fabric 75x 25 mm mesh of weight not less than 7.75 Kg persqm to window frames etc. including 62 x 19 mmbeading of Gamair wood |
| 39 | Providing structural steel work in single section fixedwith or without connecting plate including cutting,hoisting, fixing in position and applying a priming coatof approved steel primer all complete as required. |
| 40 | Providing and fixing water closet squatting pan (Indiantype W.C. pan ) with 100mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern withmanually controlled device (handle lever) conformingto IS : 7231, with all fittings and fixtures completeincluding cutting and making good the walls and floorswherever required : White Vitreous china Orrisa pattern W.C. pan of size580x440 mm with integral type foot rests. |
| 41 | Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the wallsand floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 42 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require : White Vitreous China Wash basin size 630x450 mm with asingle 15 mm C.P. brass pillar taps |
| 43 | Providing and fixing white vitreous china water closetsquatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm |
| 44 | Providing and fixing white vitreous china squatting plateurinal with integral rim longitudinal flush pipe. |
| 45 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia |
| 46 | Providing and fixing 600x450 mm bevelled edge mirrorof superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats withC.P. brass screws and washers complete. |
| 47 | Providing and fixing mirror of superior glass (ofapproved quality) and of required shape and size withplastic moulded frame of approved make and shade with6 mm thick hard board backing : Rectangular shape 453x357mm |
| 48 | Providing and fixing 600x120x5mm glass shelf withedges round of supported on anodised aluminium angleframe with C.P. brass brackets and guard rail completefixed with 40 mm long screws, rawl plugs etc., complete. |
| 49 | Providing and fixing on wall face unplasticised RigidPVC rain water, soil, waste & vent pipes (workingpressure 4 kg / cm2) conforming to IS : 13592 Type Aincluding jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion: Single socketed pipe - 75 mm OD |
| 50 | Single socketed pipe - 110 mm OD |
| 51 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water, soil, waste & vent pipes pipesconforming to IS : 13592 Type A including jointingwith seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion: coupler 75 mm |
| 52 | 110 mm |
| 53 | single equal tee with door75x75x75 mm |
| 54 | 110x110x110 mm |
| 55 | Bend 87.575 mm |
| 56 | 110 mm |
| 57 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cementand testing of joints complete as per direction ofEngineer in Charge.Internal work - Exposed on wall 15 mm nominal outer dia .Pipes. |
| 58 | 20 mm nominal outer dia .Pipes. |
| 59 | 25 mm nominal outer dia .Pipes. |
| 60 | 40 mm nominal outer dia .Pipes. |
| 61 | 50 mm nominal outer dia .Pipes. |
| 62 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes& fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints complete asper direction of Engineer in Charge.External work 15 mm nominal outer dia .Pipes. |
| 63 | 20 mm nominal outer dia .Pipes. |
| 64 | 25 mm nominal outer dia .Pipes. |
| 65 | 40 mm nominal outer dia .Pipes. |
| 66 | Providing and fixing brass stop cock of approvedquality :15 mm nominal bore |
| 67 | Providing and fixing ball valve (brass) of approvedquality High or low pressure, with plastic floatscomplete : 15 mm nominal bore |
| 68 | 20 mm nominal bore |
| 69 | 25 mm nominal bore |
| 70 | Providing and fixing uplasticised PVC connectionpipe with brass unions :30 cm length15 mm nominal bore |
| 71 | 20 mm nominal bore |
| 72 | Providing and fixing G.I. Union in G.I. pipe includingcutting and threading the pipe and making longscrews etc. complete as per CPWD specification anddirection of the Engineer - in - charge.(New work)15 mm nominal bore |
| 73 | 20 mm nominal bore |
| 74 | 25 mm nominal bore |
| 75 | 40mm nominal bore |
| 76 | 50 mm nominal bore |
| 77 | Providing and fixing PTMT bib cock of approvedquality and colour. 15 mm nominal bore, 165 mm long, weighing not lessthan 110 grams. |
| 78 | Providing and fixing PTMT stop cock of approvedquality and colour. 15 mm nominal bore, 86mm long, weighing not lessthan 88 grams. |
| 79 | Providing and fixing PTMT pillar cock of approvedquality and colour . 15mm nominal bore, 125mm long foam flow, Weighingnot less than 120 gms. |
| 80 | Providing and fixing PTMT angle stop cock 15 mmnominal bore, weighing not less than 85gms. |
| 81 | Providing and fixing unplastisised P.V.C. connectionpipe with PTMT Nuts of approved quality and colour. 15 mm nominal bore with 45 cm length |
| 82 | Cutting holes upto 15x15 cm in R.C.C. floors androofs for passing drain pipe etc. and repairing thehole after insertion of drain pipe etc. with cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) includingfinishing complete so as to make it leak proof. |
