Health and Family Welfare Government Departments Closing in 0 days TDR #30607165

Improvement Of Water Supply To Ranapur Nac ( Provision Of Water Supply To Upper Maninag Temple )

Issued by Government Departments · ranapur, Odisha
Tender Value
2 Crore
Estimated cost
Bid Submission
27 Jan 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
ranapur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Improvement Of Water Supply To Ranapur Nac ( Provision Of Water Supply To Upper Maninag Temple )

BOQ

Name of Work: Improvement of Water supply to Ranapur NAC (Provision of water supply to upper Maninag Temple)
Sl. No. Item Description
1Supplying & Laying in trenches MS pipes of all Classes conforming to IS:3589 - 2001 & IS:3601 - 2006 of the following outside diameter as per specification complete. (Earthwork in trenches, jointing of pipes,specials and fittings to be measured separately)including cost of pipe,conveyance of all materials to worksite,contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
2114.3mm O.D.M.S pipe 6.30 mm thick)
3Supplying all materials, labour, T&P for flame cutting and facing of MS plate or pipes upto 12mm to 25mm thick including cost of all labor, material,conveyance to worksite,contractor profit & labour cess for following plate thickness all complete as per specification and direction of Engineer-in-Charge.
4Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete and direction of Engineer-in-charge.
5Supplying of M.S. Flanges of following thickness ofM.S.plate confirmig IS specification with granding, polishing, testing,contractor profit & Labour cess etc all complete as per specificationas per direction of Engineer-in-Charge.
610mm thick M S plate 100 mm dia pipe
7Providingflanged joints conforming to IS:3114-1994 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions but excluding cost of MS flange as per specification complete and direction of Engineer-in-charge.
810mm thick M S plate 100 mm dia pipe
9Supplying of all materials, labour & T&P for design, construction of 1 nos of 0.40 lakh ltr capacity GSR/UGRwith testing, commissioning with instrumentation, anciallry structures Survey, Soil investigation, design, errection fitting & fixing of valves & special connection of loading and delivery pipes of M.S./D.I. flanged pipes of required dia and jointing materials. Supplying over flow and wash out pipes up to 10mtr length to suit the site condition to GSR including construction of valves chambers as per the P.H. Specification and connecting the rising & distribution pipe line including supply and fixing of ladders, water level indicator, lighting arrestors and other required arrangement required for GSR etc. all complete as per specification and direction of EIC..(Zone-VII- 3 Nos.)
10Supplying of all materials, labour & T&P for construction of 1 no. 0.40 lakh ltr capacity (ESR) with testing, commissioning with instrumentation, anciallry structures Survey, Soil investigation, design, errection fitting & fixing of valves & special connection of loading and delivery pipes of M.S./D.I. flanged pipes of required dia and jointing materials. Supplying over flow and wash out pipes of 12mtr height staging to suit the site condition to ESR including construction of valves chambers as per the P.H. Specification and connecting the rising & distribution pipe line including supply and fixing of ladders, water level indicator, lighting arrestors and other required arrangement required for ESR etc. all complete as per specification and direction of EIC.(At Zone-VII)
11Procurement of Centrifugal Pump motor with control panel along with all accessories with suitable Motor and Individual Suction and Discharge Header, Motor, Manually Operated Suction and Discharge Valve, Non Return Valve, Dismantling Joints, Bend, Tee, Elbow, Expander, Reducer with base concrete, installation, testing and commissioning etc. all complete. (For Zone-VII) ( 06 Set 5 HP),162 m Head, 1.39 LPS 100% Stand BYas per direction of Engineer-in-Charge.
12Design, drawing & Construction of Pump House for Zone - 7 ( 7.5 x 4.0 outer size)= 30.00 x 3 nos
13Earthwork in ordinary soil for foundationwithin initial leads & lifts including dressing and levelling of bed etc, complete.as per direction of Engineer-in-Charge.
14P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete. as per direction of Engineer-in-Charge.
15Filling in foundation and plinth with sand watered and rammed including cost of sand & labour. as per direction of Engineer-in-Charge.
16R.C.C. M-20 Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator and all leads and lifts including frame works etc. complete. In foundation & plinth as per direction of Engineer-in-Charge.
17R.C.C. M-20 Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator and all leads and lifts including frame works etc. complete. in superstructure as per direction of Engineer-in-Charge..
18Columns
19Plinth beam
20Lintels
21Roof Beam
22Slab
23Rigid & smooth centering & shuttering for R.C.C.works including false work & dismantling them after casting including cost of materials complete.
24R.C.C. foudation
25Colums,pillars etc.
26Beams, lintels etc.
27Roof, Slab and Chajja
28Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
29Fly ash. bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentin cement mortar (1:6) in superstructure.
3012mm thick cement plaster in cm (1:6) out side with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete.
3116mm thick cement plaster in cm (1:6) with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete.
326mm thick c.p. in cm (1:4) Over RCC surface with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete.
33Wall painting two coats with weather coat ofapproved shade on new work to give an even shade including cost of paint all labour T&P etc complete.
34Finishing wall surfaces of walls with Acrylic wall putty of approved make and finished smooth and even surfaces to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour T & P etc completed.
35Cement Washing two coats using cement including cost, conveyance of cement and cost of all labour etc. complete.
36Finishing exterior wall with cement paint of approved shade on new work of two coats including cost of paints and primer and labour charges etc complete.
372.5 cm grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips etc complete
38Dressed seasoned sal wood work framed and fixed in frames of doors & windows including cost, conveyance of all materials and labour charges etc complete.
3932mm Teak wood panelled shutters (of 32mm style with 18mm panel) including cost conveyance of all materials and labour for fitting excluding cost of iron fittings etc complete
40Painting two coats with enamel paints over one coat of primer with approved quality paints & primer to Wood/Iron work including cost of paints & primer, T&P and labour charges etc complete.
412.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12 mm size crusher broken granites chips.Ground floor.
42ELECTRICAL PORTIONS
43Supply, Installation, Testing & Commissioning of light/Fan/Exhaust Fan point in 20mm dia medium gauge ISI markedGood quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) &1.0 sq.mmPVC insulated Cu.wire (1 run) for running earth complete with 1 no .6Amp.1way plate type Modular switch (Polycarbonate) ,fan regulator, ply cover, angle holder/ceiling rose and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge.
44Group-A (up to 2mtrs)
45Group-B (up to 4mtrs)
46Group-C(up to 6mtrs)
47Secondary Point(Only wire from 1Lt Point to Another Lt Point-Upto 3mtr) .
48Supply, Installation, Testing & Commissioning of 6/16A modular switch & socket outlet complete with 1 no of240 volt 6/16 amp 3 pin universal round/flat pin combined shuttered socket outlet &240 volt 16 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with all other accessories etc.as required.complete as per the direction of Engineer-in-Charge. (MAKE- LEGRAND or Equivalent)
49Supply and fixing ofComputer socket outlet complete with 3 no of 240 volt 6 amp 4 pin universal round/flat pin combined shuttered socket outlet & 2 no. of240 volt 6 amp control switch mounted on modular grid plate, all housed in a 8 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with +B17:B18all other accessories etc. as required complete as per the direction of Engineer-in-Charge..(MAKE- LEGRAND or Equivalent)
50Circuit or Sub-main wiringin20/25/32/50mm dia. good quality ISI mark PVC Conduit withfollowing sizes PVC insulated un-sheathed 1100V,Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (MAKE- FINOLEX/ / HAVELLS)
51(2 x 2.5 + 1 x 1.5) sq.mm copper wire.
52Supply, Installation, Testing & Commissioning of 1 ph. 6 way,Single pole and Neutral, sheet steel MCB double horizontal door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required. -as per SLD.(MAKE- LIGRAND or equivalents)
53Supply, Installation, Testing & Commissioningof 6 amp to 32 amp rating 240 V \"C\" series miniature circuit breaker suitable for lighting and other loads in the MCB DB ISI marked complete with connections testing and commissioning etc. as required as per SLD.SINGLE POLE
54Supply and fixing of 25 amp to 40amp,30mA DP rating 240 V \"C\" series RCCB suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.as per SLD
55Supply, Installation, Testing & CommissioningofTPN 415v 3 phase 200 amp switch disconnector fuseincluding all other materials etc. as required.as per SLD
56Supply, Installation, Testing & CommissioningofTPN 415v 3 phase 300 amp 6 waybusbar cgamberincluding all other materials etc. as required .as per SLD
57Supply, Installation, Testing & Commissioningof 20wtt 6k tub 220v ac lightincluding all other materials etc. as required.as per SLD
58Supply, Installation, Testing & Commissioningof 9 inch metal body Exhaust Fan 220v ac lightincluding all other materials etc. as required.as per SLD
59Supply, Installation, Testing & Commissioningof 90wtt street 220v ac light with bend pineincluding all other materials etc. as required.as per SLD
60Design, drawing & Construction of Watchman Shed of internal size 3.00 x 5.00m (including toilet) plinth area with Provision of electrical installation and sanitary installation to the watchman shed.
61Earthwork in ordinary soil for foundationwithin initial leads & lifts including dressing and levelling of bed etc, complete. as per direction of Engineer-in-Charge.
62P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete. as per direction of Engineer-in-Charge.
63Filling in foundation and plinth with sand watered and rammed including cost of sand & labour. as per direction of Engineer-in-Charge.
64R.C.C. M-20 Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator and all leads and lifts including frame works etc. complete. In foundation & plinth as per direction of Engineer-in-Charge.
65R.C.C. M-20 Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator and all leads and lifts including frame works etc. complete. in superstructure as per direction of Engineer-in-Charge..
66Columns
67Plinth beam
68Lintels
69Roof Beam
70Roof Slab
71Rigid & smooth centering & shuttering for R.C.C.works including false work & dismantling them after casting including cost of materials complete
72R.C.C. foudation
73Colums,pillars etc.
74Beams, lintels etc.
75Roof, Slab and Chajja
76Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete. as per direction of Engineer-in-Charge.
77Fly ash. bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentin cement mortar (1:6) in superstructure. as per direction of Engineer-in-Charge.
7812mm thick cement plaster in cm (1:6) out side with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete. as per direction of Engineer-in-Charge.
7916mm thick cement plaster in cm (1:6) with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete.
806mm thick c.p. in cm (1:4) Over RCC surface with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete. as per direction of Engineer-in-Charge.
81Fixing Vertified floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS:13756 of following sizes infloors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete excluding cost of Tile.
82Antiskid Floor Tile - (Make -Johnson / Khajaria/Somani)
83Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with & without cost of precast tiles.
84Antiskid Floor Tile in toilet- (Make -Johnson / Khajaria/Somani)
85Wall painting two coats with weather coat ofapproved shade on new work to give an even shade including cost of paint all labour T&P etc complete.
86Finishing wall surfaces of walls with Acrylic wall putty of approved make and finished smooth and even surfaces to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour T & P etc completed.
87Supplying of M.S. Grills, M.S.Doors, M.S. Gate etc including cost of all materials etc complete
88Cement Washing two coats using cement including cost, conveyance of cement and cost of all labour etc. complete.
89Finishing exterior wall with cement paint of approved shade on new work of two coats including cost of paints and primer and labour charges etc complete.
902.5 cm grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips etc complete
91Dressed seasoned sal wood work framed and fixed in frames of doors & windows including cost, conveyance of all materials and labour charges etc complete.
9232mm Teak wood panelled shutters (of 32mm style with 18mm panel) including cost conveyance of all materials and labour for fitting excluding cost of iron fittings etc complete
93Painting two coats with enamel paints over one coat of primer with approved quality paints & primer to Wood/Iron work including cost of paints & primer, T&P and labour charges etc complete.
94ELECTRICAL PORTIONS:
95Supply, Installation, Testing & Commissioning oflight/Fan/Exhaust Fan point in 20mm dia medium gauge ISI markedGood quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) &1.0 sq.mmPVC insulated Cu.wire (1 run) for running earth complete with 1 no .6Amp.1way plate type Modular switch (Polycarbonate) , 1 no fan regulator and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge.
96Group-A (up to 2mtrs)
97Group-B (up to 4mtrs)
98Group-C(up to 6mtrs)
99Secondary Point(Only wire from 1Lt Point to Another Lt Point-Upto 3mtr) .
100Supply, Installation, Testing & Commissioning of 6A modular switch & socket outlet complete with 1 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 1 no. of240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge.
101Supply, Installation, Testing & Commissioning of 6/16A modular switch & socket outlet complete with 1 no of240 volt 6/16 amp 3 pin universal round/flat pin combined shuttered socket outlet &240 volt 16 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with all other accessories etc.as required.complete as per the direction of Engineer-in-Charge.
102Supply, Installation, Testing & Commissioning of 20/25A one way switch all housed in a single 1 module recessed zinc chromate passivated MS box includingmoulded cover plate with all other accessories etc. as required complete as per the direction of Engineer-in-Charge.
103Supply, Installation, Testing & Commissioning of 20/25A modularsocket outlet complete with 1 no of240 volt 20 amp 4 pin universal round/flat pin combined shuttered socket outletfor S.AC indoor and Out Door unit mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with all other accessories etc.as required.complete as per the direction of Engineer-in-Charge.
104Supply, Installation, Testing & Commissioning ofCalling Bell point in20mm dia. good quality ISI mark PVC Conduit with 1.5 sq.mm PVC insulated Cu.wire (2 run) &1.0 sq.mmPVC insulated Cu.wire (1 run) for running earthcomplete with 1 no .6Amp. bell push with indicator, 1 module white metal plate & G.I box of adequate size including PVC bend, saddle, elbow, etc and all other necessary materials & labour.as per the direction of Engineer-in-Charge.
105Supply &fixing ofTelephone point suitable forRJ 11 telephone socket including mounting box (G.I/PVC) & top cover of approved make to be fixed in concealed manner in partition/wall by necessary bolts & nuts with all other accessories etc. as required complete as per the direction of Engineer-in-Charge.
106Supply and fixing ofTV antennaSocket outlet completelyproviding 1 no. of TV antenna socket & Top , moulded case metal box & plate of adequate size includingPVC bend, saddle, elbow, etc. & other necessary materials &labour complete as per the direction of Engineer-in-Charge. complete as per the direction of Engineer-in-Charge.
107Supply and fixing ofComputer socket outlet complete with 3 no of 240 volt 6 amp 4 pin universal round/flat pin combined shuttered socket outlet & 2 no. of240 volt 6 amp control switch mounted on modular grid plate, all housed in a 8 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with +B17:B18all other accessories etc. as required complete as per the direction of Engineer-in-Charge.
108Circuit or Sub-main wiringin20/25/32/50mm dia. good quality ISI mark PVC Conduit withfollowing sizes PVC insulated un-sheathed 1100V,Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (MAKE- FINOLEX/ / HAVELLS)
109(2 x 1.5 + 1 x 1.0) sq.mm copper wire.
110(2 x 2.5 + 1 x 1.5) sq.mm copper wire.
111(2 x 4 + 1 x 1.5) sq.mm copper wire forAC Point. & Geyser Point.
112Supply, Installation, Testing & Commissioning of 2 pairs telephone wires ( 0.5 Sqmm) in 20/25 mm dia. good quality ISI mark PVC Conduit withfollowing sizes PVC insulated un-sheathed 1100V,Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (MAKE- FINOLEX/ DLIK/ HAVELLS)
113Supply, Installation, Testing & Commissioningof RJ-6 TV wire in20/25 mm dia. good quality ISI mark PVC Conduit withfollowing sizes of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (MAKE- FINOLEX/ DLIK/ HAVELLS)
114Supply, Installation, Testing & Commissioning of 1 ph. 8 way,Single pole and Neutral, sheet steel MCB double horizontal door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate including commissioning including all other materials etc. as required. -as per SLD. (MAKE- LIGRAND/Equivalent)
115Supply, Installation, Testing & Commissioningof 6 amp to 32 amp rating 240 V \"C\" series miniature circuit breaker suitable for lighting and other loads in the MCB DB ISI marked complete with connections testing and commissioning etc. as required as per SLD.SINGLE POLE
116Supply and fixing of 25 amp to 40amp,30mA DP rating 240 V \"C\" series RCCB suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.as per SLD
117Supply, Installation, Testing & Commissioningof 20wtt 6k tub 220v ac lightincluding all other materials etc. as required.as per SLD
118Supply, Installation, Testing & Commissioningof 18wtt 9 inchExhaust Fan 220v ac lightincluding all other materials etc. as required.as per SLD
119Supply, Installation, Testing & Commissioningof 100wtt street 220v ac light with bend pineincluding all other materials etc. as required.as per SLD
120WATER SUPPLY PORTIONS
121Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification complete.
12215mm dia CP Brass Short Body Bib Cock (PLAZA/ZIGMA/ZEN/ACQUTIC)
12315mm dia CP Brass long body Bib Cock (PLAZA/ZIGMA/ZEN/ACQUTIC)
12415mm dia CP extension piece - 25mm long
12515mm dia CP flange
126Fixing Chromium Plated Brass Shower rose with 15mm or 20mm inlet including polishing all complete as per specification.
127Fixing of Brass Screw-down Stop Cocks conforming to IS:781-1995 of the following nominal sizes as per specification complete.
12815mm dia CP Brass Angle Stop Cock (PLAZA/ZIGMA/ZEN/ACQUTIC)
12915mm dia CP Brass Concealed Stop Cock (PLAZA/ZIGMA/ZEN/ACQUTIC)
130Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.
131Stainless steel kitchen sink - without drain board 600x450 mm bowl depth 200 mm (Parry Ware/NIRALI).
132Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge
1331000 litre capacity Double Layer Cylinderical Vertical water storage tanks(ISI Marked)
134RCC beam Staging for installationof PVC tanks with Fly ash Brick Masonary in CM (1:6) as per direction of EIC
135Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
13625 mm nominal outer dia pipes
13720 mm nominal outer dia pipes
138Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.
13925mm dia Brass or Gun Metal Full Way Valve
14032mm diameter
141Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11)conforming to IS 15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer- in-Charge.
14232 mm nominal outer dia pipes
143Fixing of Brass Ball Valve (Horizontal plunger type) conforming to IS 1703-1977 as per specification complete
14432mm dia nominal bore with Copper or PVC Ball Valve (Horizontal plunger type)
145Fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification.
14615mm dia pillar cock (PLAZA/ZIGMA/ZEN/ACQUTIC)
14715mm dia CP pillar cock long neck (PLAZA/ZIGMA/ZEN/ACQUTIC)
148Cutting holes through existing brick work including makinggood the same in cement mortar (1:4) for takingGI/PVC pipes and fittings etc all complete as per specification.
149250mmthick wall
150Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof.
151Cutting grooves in pucca floors and walls for takingGI/PVC pipes and making good the damages as per specification complete.
152Fixing ferrule conforming to IS:2692-1978 of the following nominal bore including drilling thewater main (Cast Iron pipesorpipes with the metal straps) as per Specification complete.
15310mm to 25mm bore
154Cost of Stop Cock Chamber
155SANITARY INSTALLATION
156Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.
157Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification. .
158580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan.
159Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
16010 litre capacity - White
161Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.
162Stainless steel kitchen sink - without drain board 600x450 mm bowl depth 200 mm. (Paryware/Nirali)
163Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.
164Chromium Plated brass towel rail (20mm X 600mm long)
165Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.
166Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.
167Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification.
168Fixing Cast (Spun) Iron floor traps of the following nominal diameter of outlet of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors all complete as per specification.
169Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately).
170Fixing(b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws.
171Supplying all labour, tools and plants ,materials for fixing of CP Gratings
172Sewage Disposal System
173Supplying all labour, T&P, Materials for Construction of Gully Trap Chamber with fly ash brick masonary and Rcc cover.(250x250x675)mm. as per direction of EIC
174Supplying all labour, T&P, Materials for Construction of Inspection Chamber. (0.90x0.80x0.45) m with fly ash brick masonary and S.F.R.C Cover. as per direction of EIC
175Supplying all labour, T&P, Materials for Construction of Man Hole Chamber-(0.9mx0.9x0.90m). as per direction of EIC
176Septic Tank (10 Users)
177Supplying all labour, T&P and earth work in excavation in all kinds of soil within initial lead of 50m lead & initial lift of 1.50m. including rough dressing breaking clods & laying in layers not exceeding 0.30m. In depth, leveling the bed, using pans, vessels for slushy soil & including sundries supervision charges & labour cess etc, as per the direction of Engineer-in-charge.
178Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty , taxes ,contractor profit &labour cess etc all complete as per specification and direction of Engineer-in-charge.
179Supplying all materials, labour, T&P and providing cement concrete(1:4:8) with 40cm size crusher broken black hard granite metal including watering , curing, conveyance of all materials to work site, payment of royalty taxes& labour cess etc all complete as per specification and direction of Engineer-in-charge.
180Supplying all labour, materials ,T&P and providing Cement concrete (1:2:4) with crusher broken hard granite chips on 12mm size RCC works including cost of conveyance & royalty ,sundries , watering ,curing &lifting &laying concreteat a height of 5mtr. Maximumcomplete etc all complete(Excluding cost of reinforcement & centering & shuttering)
181R.C.C work in ground floor of M-20 gradewith 20mm & down grade crusher broken hard Granite chipsincluding hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .
182Supplying all materials, labour, T&P and providingrigid andSmooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty taxes & labour cessetc all complete as per specification and direction of Engineer-in-charge.
183Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentt in cement mortar (1:4) in foundation and plinth
18412mm thick cement plaster in cm (1:6) out side with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete.
18512mm thick cement plaster (1:4) over brick work with cement punning for skirting
186Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
187Soak way pit (1.20 m dia x 1.5 m deep) with RCC ring. As per direction of EIC.
188Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes
189110mm diameter U-PVC SWR pipes (4kgf)
190Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion.
191110mm pvc coupler
192Single tee with door 110x110x110 mm pvc
193110mm pvc dia plain bend
194110mm pvc cowl
195110 pvc offset
196Providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the following type of surrounding or encasing salt-glazed stoneware pipes/pvc pipes of the following internal diameter including concrete for bedding and curing complete as per PH specification
197TYPE- C 1STANDARD BEDDING :
198100mm diameter
199Compound Wall at ESR/GSR/UGR Site (Detailed Estimate Attached) - 120 mtr Each - 4 Nos
200Earthwork in ordinary soil for foundationwithin initial leads & lifts including dressing and levelling of bed etc, complete
201P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete.
202Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour
203R.C.C. M-20 Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator and all leads and lifts including frame works etc. complete. In foundation & plinth
204R.C.C. M-20 Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator and all leads and lifts including frame works etc. complete. in superstructure
205Columns
206Plinth beam
207Rigid & smooth centering & shuttering for R.C.C.works including false work & dismantling them after casting including cost of materials complete
208R.C.C. foudation
209Columns
210Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
211Fly ash. bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentin cement mortar (1:6) in superstructure.
21212mm thick cement plaster in cm (1:6) out side with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete.
213Cement Washing two coats using cement including cost, conveyance of cement and cost of all labour etc. complete.
214Construction of Internal RoadRoad-50 mtr x 4 nos
215Supplying all materials, labour, T&P and filling of road surface with borrow earth from the approved quarry and compacting to the requireddensity with testing including cost of royalty\"lead & transportation & labour cess etc all complete as per the direction of Engineer-in-charge.
216Supplying moorum for sub base of road at work site from the approved quarry including cost of all materials, taxes, royalty, conveyance & labour cess etc all complete.
217Supplying all labour, T&P and Laying of sub base of road in layers not exceeding 100mm. Wattering and compacting to the required dencity with testingincluding cost of roayality,lead & transportation etc all complete.
218Supplying 4cm size hard granite metal forroad work at work site including cost of all labour, T& P etc all complete. I.R.C. Grade I I (63mm to 45mm)
219Supplying all labour, T&P and Spreading metals and packing the voids with small stone & hand packing to proper camber including conveying & spreading of filler materials and filling the interstics by spreading the same over the surface, watering and consolidation with P.R.R.
220Supplying all materials, labour, T&P and providing rough stone dry packing in approns and revetment with hard granite stone including cost of all materials, taxes,conveyance of all materials to work site, labour cess etc all completeas per specification and direction of Engineer-in-charge.
221Site Development
222Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .
223Fine dressing of earth work in ordinary or hard soil in road formaton according to the direction of the department including cutting or filling earth upto 0.15m depth of surface.
224Road and Yard Lighting
225Supply, Installation, Testing & Commissioning of l Hot dip galvanizedlighting Pole 6m hight with Powder coating , the work include supplying and installing the following :- 2 decorative arms.- 2 lanterm IP 65, with LED lamps 27W .-3*2.5mmsq cable inside 1 Inch flexible conduit for Luminaries.-Control box with 1x10 A DP MCB-Steel base with B250 concrete foundations 60x60x60cm.- All needed Bolts ,Nuts ,Washers, Terminal connections, Accessories, & all needed reinforced cement .All works must be According to drawing and supervisor Instructions.
226Design engineering procurement at materials and bought out components manufacturing assembly at shop inspection, testing and paints at manufacture\"s works packing, supply, unloading, transpotation, handing/stroage at site, assembly at site installation including touch up painting hook up, pre - commissioning and testing of the completing of the following capacity, DG set along with AMF panels , Acoustic , enclousure supply of all the special tools and tackies(as required) instrumentation all exhaust system & siencer, fuel tank, fuel piping, change over , cables, foundation base, shed including required silent DG sets of following capacity, Construction of base and shed etc. all complete as per the direction of the engineer in charge.
22725 KVA Silent DG set.
228Supplying all Labour T&P Materials for providing Cement Concerete Props using cement concrete 1:2:4 including cost opf MS Clamp for taking MS Pipes .
229Earthwork in Stoney Earth for foundationwithin initial leads & lifts including dressing and levelling of bed etc, complete.
230Cement concrete (1:1.5:3) with 6mm size crusher brokenhard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete.
231Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty , taxes ,contractor profit &labour cess etc all complete as per specification and direction of Engineer-in-charge.
232Supplying all materials, labour, T&P and providingrigid andSmooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work
233Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
234Cost of Providing MS Pipe Fasterners (2 Kg ) inluding cost of Nut, Bolt & Rubber insertion
235Supplying all Labour T&P Materials for providing cistern type water Supply to Floating Population.
236Earth work in hard soil or Gravelly soil within 50m, initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per specification approved by the E.I.C.
237Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty , taxes ,contractor profit &labour cess etc all complete as per specification and direction of Engineer-in-charge.
238Supplying all materials, labour, T&P and providing cement concrete(1:3:6) with 40cm size crusher broken black hard granite metal including watering , curing, conveyance of all materials to work site, payment of royalty taxes& labour cess etc all complete as per specification and direction of Engineer-in-charge.
239Supplying all labour, materials ,T&P and providing Cement concrete (1:2:4) with crusher broken hard granite chips on 12mm size RCC works including cost of conveyance & royalty ,sundries , watering ,curing &lifting &laying concreteat a height of 5mtr. Maximumcomplete etc all complete(Excluding cost of reinforcement & centering & shuttering)
240R.C.C work in ground floor of M-20 gradewith 20mm & down grade crusher broken hard Granite chipsincluding hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .
241Supplying all materials, labour, T&P and providingrigid andSmooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty taxes & labour cessetc all complete as per specification and direction of Engineer-in-charge.
242Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentt in cement mortar (1:4) in foundation and plinth
24312mm thick cement plaster in cm (1:6) out side with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete.
244Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with & without cost of precast tiles. (Johenson/Kajaria/Somani)
245Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.
246Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification complete.
24715mm dia CP Brass Short Body Bib Cock (PLAZA/ZIGMA/ZEN/ACQUTIC)
24815mm dia CP extension piece - 25mm long
24915mm dia CP flange
250Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
25125 mm nominal outer dia pipes
25220 mm nominal outer dia pipes
253Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.
25425mm dia Brass or Gun Metal Full Way Valve
25532mm diameter
256Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11)conforming to IS 15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer- in-Charge.
25732 mm nominal outer dia pipes
258Cutting holes through existing brick work including makinggood the same in cement mortar (1:4) for takingGI/PVC pipes and fittings etc all complete as per specification.
259250mmthick wall
260Cutting grooves in pucca floors and walls for takingGI/PVC pipes and making good the damages as per specification complete.
261Cost of Stop Cock Chamber as per direction EIC
262Fixing Cast (Spun) Iron floor traps of the following nominal diameter of outlet of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors all complete as per specification.
263Supplying all labour, tools and plants ,materials for fixing of CP Gratings as per direction EIC
264Supplying all labour, T&P, Materials for Construction of Gully Trap Chamber with fly ash brick masonary and Rcc cover.(250x250x675)mm. as per direction of EIC
265Supplying all labour, T&P, Materials for Construction of Man Hole Chamber-(0.9mx0.9x0.90m). as per direction of EIC
266Soak way pit (1.20 m dia x 1.5 m deep) with RCC ring. As per direction of EIC.
267Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes as per direction EIC
268110mm diameter U-PVC SWR pipes (4kgf)
269Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion.
270110mm pvc coupler
271110mm pvc dia plain bend
272Providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the following type of surrounding or encasing salt-glazed stoneware pipes/pvc pipes of the following internal diameter including concrete for bedding and curing complete as per PH specification
273TYPE- C 1STANDARD BEDDING :
274100mm diameter
275Supply and fixing of the following sanitary items:
27632mm CP waste
27732mm Waste pipe
278Supplying all labour, T&P and painting two coats with any approved epoxy based paint includingcost ofSundries, brushes, soap, &putty etc including preparation ofSurface ,contractor profit &labour cessall complete as per the direction of Engineer-in- Charge.
279Supplying all labour, T&P and Blasting hard and compacted sheet rock excluding sand stone measured in solid including jumping holes cost of explosive fuse, detonator, etc and stacking the blasted debris clear of work within 50m lead & labour cess etc, as per the direction of Engineer-in-charge.
280Supplying all labour, T&P and Fixing the cast Iron sluice valve/Butter fly valve/scour valves with double flanged ends for water works purpose for the following rating and nominal diameters (including cost of bolts,nuts and rubber insertion sheet & cost of the cast iron sluice valves) as per specification, complete as per the direction of the Engineer -in-charge(including 1% labour cess) IS 14846 Kirloskore/Vag or equivalent quality.
281Supplying all materials, labour, T&P and fixing swing check type Reflux Valves (Non-return valves) with double flanged ends conforming to IS : 5312 (Part-I) - 2004 for water works purposes for the following rating and nominal diameters as per specification complete and direction of Engineer-in-charge. (including cost of bolts,nuts and rubber insertion sheet & cost of the cast iron Reflux Valves (Non-return valves)Kirloskore/Vag or equivalent quality.
282Supplying all materials, labour, T&P and fixing Single Air Relief Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps),as per specification & contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge. complete. (including cost of valve).

AI Tender Summary

OUR REF NO 30607165
AUTHORITY Government Departments
TENDER VALUE 2 Crore
LAST DATE 27-01-2022
Authority
Authority Name Public Health Division
Work Description Improvement Of Water Supply To Ranapur Nac ( Provision Of Water Supply To Upper Maninag Temple )
Basic Detail
Tender No EEPHBBSR-64/2021-22 DTD.24.12.2021
Bidding Type Tender
Location
City ranapur
State Odisha
Key Dates
Publish Date 06 Jan 2022
Submission Date 27 Jan 2022
Open Date 28 Jan 2022
Finance
Tender Value 2 Crore
Tender Fee 10000
EMD Ref. Documents
Exemption Not Available
Document List
f7d76ccb-d102-4f66-83d8-f77518540b3c.html
BOQ_389060.xls
DTCN.pdf
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 06, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 27, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 28, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

f7d76ccb-d102-4f66-83d8-f77518540b3c.html

xls

BOQ_389060.xls

pdf

DTCN.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders