Government Medical College Hospital has published Purchase Of Battery Operated Power Drill To Orthopaedics Department Purchase Of Battery Operated Power Drill To Orthopaedics Department , Equipment :Battery Operated Power Drill And Reamer Saw & Accessories The System Should Consist Of The Following A. A4. Submission Date for this Tender is 27-01-2022. Cutting Crimping and Punching Tools Tenders in Kerala. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 22-Jan-2022 | Date Corrigendum | Date | 27-01-2022 |
Sl. No. | Item Description |
1 | Equipment :Battery operated power drill and reamer saw & accessories The system should consist of the following A. A4 Station battery Charger 1. With battery status feedback with charge, ready and replace indicators. Should have conditioning cycle completely discharge non – sterile battery before charging. B. Battery Pack 1. Should provide Run time of 15-20 minutes 2.Should provide 4 number backup batteries. C. Battery powered sagital/oscillating saw 1. Should provide dual speed of 10,000 & 12,000 CPM in standard and faster modes 2. Plane of blade movement should be adjustable in 8 steps of 45 degree 3. Variable speed trigger for greater control when trimming or planning 4. Tool-less blade mount for quick & easy changing of blades 5. Noise levels should not exceed 87 db & 3 db in standard and faster mode. 6. Should be provided with 1.28mm blade – 1No 7. Should be provided with 4mm saw D. Drill and Reamer Hand Piece 1. Should have drill and ream in the same hand piece 2. Should have dual trigger for forward/reverse and oscillation mode 3. Should have maximum speed of (0-1200) rpm in drilling, 270rpm in reaming 4. Should have variable speed control on the hand piece 5. Should deliver maximum torque of 150in/lbs 6. Should have drill torque of 35in/lbs 7. Should have DC brushless motor 8. Should have appropriate adaptors for drilling, reaming and pin placement and wire placement 9. Should have microprocessor controlled hand piece 10. Should be fully cannulated 4mm hand piece 11. Should have piston grip hand piece 12. Should have tool less 360 degree attachments insertion 13. Should be autoclavable. 14. Should have dedicated forward and reverse switch with safe mode 15. Should have no lubrication required for life time E. Drill and Reaming attachments 1. ¼ inch Jacobs drill attachment with key 2. Quick connect attachment 3. Reamer attachment 4. K wire collet attachment F. Flexible reamers 1. Flexible reamer entire shaft from 6mm to 15mm dia fixed Head(with 4.5mm cortical) screw self-tapping (sterile) step of 0.5mm difference- set of 19 no’s 2. Guide wires standard length 100cm, thickness 3 or 3.5 mm, ball tipped and ordinary each 6 nos. Price of ball and ordinary tip shall be quoted combined in the BOQ. 3. Flexible Reamer shaft standard length 440mm G. Should have safety certificate from a competent authority CE issued by a notified body registered in the European commission / FDA (US)/ STQC CB Certificate/ STQC S Certificate or valid detailed electrical and functional safety test report from ERTL. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail