Military Engineer Services-MES has published Repairs To Flooring, Plastering, Tiling, Joinery, Plumbing, Sanitary Fittings, Service Tank Cleaning And Connected Items At Hasting Lines, Imh Line, Eme Records, Eme Depot, Old Mercury Line, New Mercury Line, Robert Line, Rober. Submission Date for this Tender is 25-01-2022. Flooring Work Tenders in secunderabad Telangana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick (below or above ground level) . |
| 2 | M&L for 40 mm thickfor PCC (1:2:4) type B1 20 mm graded stoneaggregate as in flooring finished even and smooth using extra cement. |
| 3 | S&F for Glass dividing strips, 3mm and width of strip 38mm complete all as specified and directed. |
| 4 | M&L for 75mm thick plain cement concrete in (1:3:6) type C1 using 20 mm graded aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 5 | Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) includingrubbish off the premises complete all as specified and as directed. |
| 6 | M&L for 25 mm thickfor PCC (1:2:4) type B1 20 mm graded stoneaggregate as in flooring finished even and smooth using extra cement. |
| 7 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate 75 mm thick as in sub base complete all as specified and directed. |
| 8 | M&L for Non - skid Ceramic joint free colouredtiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 9 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 10 | M&L for Machine cut cudappah stone slab 20-25mm thick over 20 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 11 | M&L Polished Shahabad stone slab flooring bedded in CM 1:6, 20mm thick (minimum) jointed and pointed in CM 1:3 thickness of stone slab varying from 20mm to 25mm, including cutting and polishing complete all as specified and directed. |
| 12 | M&L Cement ConcreteChequred colour tiles 250 X 250 X 22mm/300mmx300mmx22mm jointed with white cement & pigmentand pointed in colour / white cement to match the shade of tile over 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 13 | M&L for Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate ) as in edging/ hold fast etc complete all as specified and directed. |
| 14 | M&L for 18 to 20mm thick black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat-forms and like in cement mortar (1:4) incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4complete all as specified and directed. |
| 15 | Rounding to edges of stone slabs one edge such as in steps cooking platform and other similer shine |
| 16 | M&L for10mm thick vitrified light shade polished ceramictiles,area of each tile n.exceeding 0.36 sqmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 17 | M&L for Glazed ceramic coloured tiles of size 350x450x7 mm/ 450x350x7mmwall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile over 10 mm thickplaster in CM 1:4as in skirting / dados etc,complete all as specified and directed. |
| 18 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular)joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dados etc. over 10mm thick rendering in CM (1:4) on walls such as backing of tiles complete all as specified and as directed. |
| 19 | M&L for10mm thick vitrified light shade polished ceramictiles,area of each tile not exceeding 0.36 sqm, in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed. |
| 20 | M&L Polished Shahabad stone slab 20mm thick (minimum) thickness of stone slaas in skirting/dados in CM 1:4, jointed and pointed in CM 1:3including cutting and polishing complete all as specified and directed. |
| 21 | Taking down cement plaster from brick or stone walls, ceiling etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified anddirected. |
| 22 | M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L for rendering 5 mm thick on ceiling in CM 1:3finished even and smooth without using extra cement complete all as specified and as directed. |
| 24 | M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cementincl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately). |
| 25 | M&L for making good of the fallen/broken portion of the RCC Roof/Ceiling with proper reinforcement binding & application of antifungal paint for avoiding rusting of old steel reinforcement complete all as specified and directed. |
| 26 | M&L forapplyingtwo coats of oil bound distemper over a coat of primer with wall care putty in two coatsincluding prepartion of new surfaces on walls complete all as specified and as directed. |
| 27 | M&L forapplyingtwo coats of oil bound distemper over a coat of primer including prepartion of new surfaces on walls complete all as specified and as directed. |
| 28 | M&L for applying three coats of white wash on ceilingincluding perpartion of new plaster surfaces complete all as specified and as directed. |
| 29 | M&L for applying two coats of cement base painton new plastered surfaces of wallincluding preparation of surfaces over a coat of priming paint complete all as specified & directed. |
| 30 | M&L forapplyingtwo coats colour washing on wall surfaces including prepartion of new surfacescomplete all as specified and as directed. |
| 31 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl wooden/steel windows/ventilators etc complete all as specified. |
| 32 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm but n exc 4.00 sqm each incl steel windows etc complete all as specified. |
| 33 | Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed. |
| 34 | M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed. |
| 35 | M&L for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails.M.S Srame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed. |
| 36 | S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and as directed. |
| 37 | S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified and directed. |
| 38 | Hacking out old broken glass(any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, all as specified and directed. |
| 39 | M&L for sheet glass ordinary quality 3 mm thick fitted with beeding/putty n.exc 0.5 sqm each complete all as specified and as directed. |
| 40 | M&L for sheet glass ordinary quality 3 mm thick fitted with beeding/putty n.exc 0.5 sqm each sheet glass is ground or obscured or frosted, on one side and fixed complete all asspecified and directed. |
| 41 | S&F for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed. |
| 42 | S&F in repairs for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed. |
| 43 | S&F for Factory made 35mm thick 2nd class hard wood,plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and directed by Engr-in-Charge. |
| 44 | S&F Factory made 35mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass/gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass and gauge etc. |
| 45 | S&F 35 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type complete all as specified and as directed. |
| 46 | M & L for glazed and skeleton shutters 30mm thick 2nd class hard wood open rebated and prepared to receive glass divided into squares with plain chamfered or rounded or mitred and rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of members as specified in SSR Part I, section 8 clause 8.20 (a). |
| 47 | M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated and solid, rounded or chamfered, put together with glue pinned at joints |
| 48 | S&F Mild Steel butt hinges 100mm long medium weight cold rolled mild steel etc all as specified and directed. |
| 49 | S&F Mild Steel butt hinges 75mm long medium weight cold rolled mild steel etc all as specified and directed. |
| 50 | S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified and directed. |
| 51 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250mm long all as specified and directed. |
| 52 | S&F 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified and directed. |
| 53 | S&F aluminium handles fabricated type, anodised, 150 mm size complete, all as specified and directed. |
| 54 | S&F in floor door stopper of aluminium alloy body of 140mm long complete all as specified and as directed. |
| 55 | S&F in repairsfloor door stopper of aluminium alloy body of 140mm long complete all as specified and as directed. |
| 56 | M&L for Bands, straps, supports or stays for rain water, ventilating pipes, incl bolts if required clamps, holdfasts, wall ties etc,and similar work conforming to Fe-290- Gde-E-165, all as specified and directed. |
| 57 | Preparation of new woodenor wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified. |
| 58 | Supply and fixin repairs hydraulic door closer of designation No.3Universal type cast iron body suitable for doors of weight between 61 to 80 Kg including taking down defective hydraulic door closer. |
| 59 | S&F in repairs 75mm size mild steel hasp and staple, safety type, stove enamelled, including bolt to hinge plate and fixed with bolts and nuts complete all as directed by Engineer-in-charge. |
| 60 | S& F in repairs 40mm dia, cup board knobs fixed with nut, screw and washer of mild steel, bright finished |
| 61 | Dismantling water tanks exc 250 and n exc 500 Ltrs capacity of any type or size complete all as specified and directed. |
| 62 | Dismantling water tanks exc 500 and n exc 1000 Ltrs capacity of any type or size complete all as specified and directed. |
| 63 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 Llitres including PTMT ball valve high pressure of 20mm completeall as specified and directed. |
| 64 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including PTMT ball valvehigh pressure of 20mm completeall as specified and directed. |
| 65 | S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and completeall as specified and directed. |
| 66 | S&F in repairs Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe orfixed of size 20 mm bore complete allas specified and directed. (Min Wt 20mm- 210 gms). |
| 67 | S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mmsize with PTMT nuts of length 450mm complete all as specified and directed. |
| 68 | S&F in repairsVitreous china wash hand basin white flat back size 550x400mm including brackets, CP pillar cock (fancy type )of 15mm bore, CP waste fittings 32mm, incl waste pipe complete all as specified and directed. |
| 69 | S&F in repairsVitreous china orrisa pan squatting pattern 580 X 440mm with integral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacitycomplete as directed. |
| 70 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity white , with inlet ball valve , float and handle including brackets , Flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mmsize with PTMT nuts of length 450mm complete all as specified and directed. |
| 71 | S&F in repairs Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed. |
| 72 | S&Fin repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed. |
| 73 | S&F in Repairs Pillar taps fancy type , cp brass chromium plated screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed. |
| 74 | S&F in Repairs fancy type bib taps,cp brass chromium plated with capstan head, screwed down, screwed for 15 mm bore iron pipe complete all as specified and directed. |
| 75 | S&F Stop valves, cp brass chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed. |
| 76 | S & F in repair 15 mm dia stop valves cp brass chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed. |
| 77 | S&F in repairs angular stop valve cp brass chromium plated screwed for 15 mm bore iron pipe complete all as specified and as directed. |
| 78 | S&F in repairsin bevelled edge mirror of size 600 x 450 mm made out of selected quality glass, with aluminium beading frame mounted on and including 6 mm thick commercial plywood BWR grade and fixed to wooden plugs with 2 Nos. hooks . |
| 79 | S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium platedfixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed. |
| 80 | S&F in repairs chromium plated health faucet with 125 cm long flexible hose and wall hook complete all as specified and as directed. |
| 81 | S&F in repairs 20/25mm dia CP decorative type draphery curtain rods with brackets of approved pattern and quality complete all as specified and as directed. |
| 82 | S&F in repairs soap dish vitreous china white any type fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 83 | S&F in Repairs Toilet paper holder vitreous white or any colour china any type complete all as specified and as directed. |
| 84 | S&F in repairs 32 mm dia waste coupling of PTMT(Half or Full thread) complete all as specified and as directed. |
| 85 | S&F in repairsPVC connection pipe 15 mm size PTMT nut 450 mm long complete all as specified and as directed. |
| 86 | S&F in repairs32mm dia PVC wastepipe of 1.20 mtr long for wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed. |
| 87 | S&F in repairs40mm dia PVC wastepipe of 1.20 mtr long for sink of pressure rating 10 kgf/Sqm complete all as specified and as directed. |
| 88 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement of size 75mm complete all as specified and as directed. |
| 89 | S&F in repair bathroom cabinet with door fitted with looking mirror as per sample approved and all as specified and as directed. |
| 90 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thickkitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 91 | S&F in repairsfor stainless steel plate rack of size 1200x900mm of approvedmake and quality complete all as specified and as directed by Engr-in-Charge. |
| 92 | S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,(concealed) 15mm bore.including taking down old pipe complete all as specified and as directed. |
| 93 | S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed. |
| 94 | Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed. |
| 95 | S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 110mm complete all as specified and as directed. |
| 96 | S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 75mm complete all as specified and as directed. |
| 97 | S&F PVC (SWR) bends 110mm all as specified and as directed. |
| 98 | S&F PVC (SWR) bends 75mm all as specified and as directed. |
| 99 | M&L in Repairs 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13 sqcm but n exc 25 sqcm. |
| 100 | M&L in Repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed. |
| 101 | S&F hasp & staple 100mm size aluminium anodised fixed with screws. |
| 102 | S&F continous (Piano) hinges , mild steel, bright finished or electrogalvanised width of flaps in 30mm |
| 103 | S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved qualitycomplete all as specified and as directed. |
| 104 | S&F in repairs 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 90 gms) complete all as specified and as directed. |
| 105 | S&F in repairs 15mmpillar tap of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 110 gms) complete all as specified and as directed. |
| 106 | S&F in repairs 15mm stop valves of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 90 gms) complete all as specified and as directed. |
| 107 | S&F in repairs 15mm Angle stop valves of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 90 gms) complete all as specified and as directed. |
| 108 | S&F in repairs of swivel shower rose of PTMT of any colour fixing with 15mm pipe (Min Wt 40gms) |
| 109 | Disconnecting existing tanks,of exc 250but n.exc 500 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. |
| 110 | Disconnecting existing tanks,of exc 500 but n.exc1000 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. |
| 111 | Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc from tanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 250 & n exc 500 ltrs and recconneting ,air lock complete all as specified. |
| 112 | Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc fromtanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 500 & n exc 1000 ltrs and recconneting ,air lock complete all as specified. |
| 113 | Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc fromtanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 1000 & n exc 2000 ltrs and recconneting ,air lock complete all as specified. |
| 114 | S&F in repair WALL MIXER with provision of over head shower with 115mm on ben pipe on upper sie, connecting legs &wall flanges complete all as specified and directed. Make: CAT NO: FLR - 5273UPR of Jaquar or equivalent. |
| 115 | M&L for Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate ) as in kerb stoneetc complete all as specified and directed. |
| 116 | M&L for sand cushion 20 to 30mm thick for fixing of inter locking tiles complete all as specified and directed |
| 117 | M&L for Machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
