Construction Of Bank And Post Office Building At Annamaligai In Ward No 43
Tender Value
56.96 Lakhs
Estimated cost
Bid Submission
11 Jan 2022
0 days left
EMD
56960
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
→ Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Bank And Post Office Building At Annamaligai In Ward No 43
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the Exsisting Building brick Work Depression Clearance away from site 3m Etc.Complete Brick / Stone Masonry in cement mortar walls under 3m high (SOR 21-22 P-29 Sl-14) |
| 2 | Dismantling RCCSlab Depression Clearance Away from site 3.0Km Etc.Complete(SOR 21-22 P-30 Sl-29) |
| 3 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil,wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may bedirectedexceptinhardrockrequiring blastinginclusive of shoring shuttering, ,and baling out water and cleaning and levelling the site etc.,complete 10 m3(Build 21-22 P-20 Sl-1) |
| 4 | Supplying and filling in foundation andbasement with Stone Dust in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.(Build 21-22 P-22 Sl-5) |
| 5 | Plain Cement Concrete 1:4:8 (One cement four sand andeight aggregates) using 40mm gauge hard broken granite jelly for foundation including consolidation and dewatering for foundation whenever necessary etc. complete. (Build 21-22 P-23 Sl-10) |
| 6 | Suppling and erecting shuttering with necessay supports for Plinth Beam with all cross bracings etc., complete ( Side Only) the payment for centering shall be given offer the concrete is laid vertical portion using steel plate.. |
| 7 | Supplying, erecting STEEL CENTERING for sides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid(Bottom Only)(Build 21-22 P-26 Sl-14A) |
| 8 | Supplying, erecting with necessary supports for plain surface such as RCC Boxing side slab and silmilar RCC slab with all cross bracing etc., completein all floors of any height ( the retrived materials should be taken back by the contractor the payment for cenetering shall be given after the concrete is laid ( vertical portion ) 10m2(Build 21-22 P-26 Sl-14B) |
| 9 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stonfor all RCC items of works excluding centering shuttering and cost ofeinforcement but including curing etc.,complete and also including fixing fanclamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.(Build 21-22 P-27 Sl-15) |
| 10 | Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 20 mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% byweight of cement used and finishing, curing etc. complete complying with standard specification (Build21-22 P-36 Sl-32) |
| 11 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. (Build 21-22 P-34 Sl-22) |
| 12 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFTFoundation Basement(Build 21-22 P-24 Sl-25) |
| 13 | Ground Floor(Build 21-22 P-24 Sl-25) |
| 14 | Brick work in CM 1:3 (one cement & five sand) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT (Build 21-22 P-36 Sl-28A) |
| 15 | Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilasto site and labour charges etc,complete as per standard specifications (S.I.306) (Build 21-22 P-39 Sl-36) |
| 16 | Plastering with cement mortar 1:3, 20 mm ,thick in allfloors including cost and conveyance of all materilasto site and labour charges etc,complete as perstandard specifications (S.I.306) (Build-21-22 p-40 slno -39) |
| 17 | Plastering with cement mortar (1:5) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) (Build-21-22 p-41 slno -44) |
| 18 | Supplying and Filling Well Gravel in layers of 25cm thick including cost of gravel stacking for premeasurements watering and consolidation by power roller rolling using 12.50 cum of gravel for 10 m3 for finished work etc. Complete (Build-21-22 p-21 slno -2) |
| 19 | Paving the floor withVitrified Marbonite tilesof approvedqualityandcolourofsize600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement threesand)20mmthickandlaidstraightalignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly andfixinginpositionasperstandardspecifications andasdirectedbythedepartmentalofficer. The colour&qualityoftilesshouldbegotapprovedby Municipal Engineer before use on work(Build-21-22 p-47 slno -62) |
| 20 | Dadooingwallswith Glazedtilesofsizes305mm X200mmX6mmsizeofapprovedmakeandquality andcolourlSetincementmortar1:2(onecement ,twosand)over10mmbaselayerplasteringand pointing with white cement neatly as directed. (Build-21-22 p-49 slno -65) |
| 21 | White washing one coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specificationand as directed. -100sq.m S.I.333(Build-21-22 p-53 slno -74) |
| 22 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m(Build-21-22 p-57 slno -87) |
| 23 | Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections (build p-97 sl-151) |
| 24 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm andshutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energyloss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work (SOR p-65 sl-265) |
| 25 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window systemshould be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.(SOR P-65 Sl-264) |
| 26 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round theframes. The ventilator should be got approved fromthe Executive Engineer before use on work. (SOR P-66 Sl-266) |
| 27 | supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc(SOR P-52Sl-259) |
| 28 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc.,complete.-10 cum (Build-21-22 p-41 slno -46) |
| 29 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete (Build-21-22 p-42 slno -47) |
| 30 | Supply and laying of 2 core 1.5 sq.mm. armoured copper cable for control wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers. |
| 31 | Supply & run of 2 of 4sq.mm (56/0.3) PVC insulated cu.conductor of 1100V grade in rigid pipe concelead in ceiling with continious earth wire connection (SD-57) |
| 32 | SUPPLYING LYING AND JOINTING OF L.T. CABLES- 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 1554 PART I WITH ISI MARKING |
| 33 | Supplying and fixing service meter board under one box @ panal board the rate seprate cost & copper fuse bar Fuse unit foundationRCCB63A Fuse, including etc Complete. |
| 34 | Supplying and fixing of Cable Clamps (TWAD P-118) |
| 35 | Supplying and fixing of Cable gland suitable for 3½ core 150 sq.mm Ugcable |
| 36 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the(Build-21-22 p-64 slno -108) |
| 37 | Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm \"P\" os \"S\"\" trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litresPVCLowLevelFlushingTankwithallinternal fittings etc., complete complying with standard spoecifications,laborinclusiveoffixinglowlevel flushing tank. (Build-21-22 p-64 slno -109) |
| 38 | Supplying and fixing in position best quality approved makewhiteglazedearthenwarewash handbasin of size 550 X 400 mm with a pair of cast iron brackets, includingcostof15mmdiametrebrasschromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametreP.V.C. waste pipe with rubber plug andchain,15mmdiametreG.M.wheelvalve,15mm diabrassnipple,15mmdianylonconnectionsetc., includingfixingthewashhandbasininthewallin positionwithapairofC.I.bracketswithteak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats ofpaintoveraprimimgcoatofanticorrosivepaint includingtestingforleackageetc.,complete complying with standard specifications |
| 39 | AC Ceiling Fan complete 1200 mm (48\") Sweep with300mm Down Rod (without Regulator) PWD - 117 |
| 40 | Supply and fixing of single box type 4\"40W flu Fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu.Tube with PVC unsheated leads from terminals to the fitting. Ele - 43 |
| 41 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes andspecials for pipe connection works including cutting, threading and fixing charges etc., |
| 42 | Pipes and SpecialsPvc Pipe 110mm downfall pipe (build 21-22 p-61 sl - 106 |
| 43 | cpvc Pipe 25mm p-106 sl-410 |
| 44 | cpvc Pipe 20mm |
| 45 | PVC 110mm Nahine trap p-51 sl- 204 |
| 46 | PVC 110mm vent Cowle p-104 sl-392-N |
| 47 | PVC 110mm Elbow |
| 48 | PVC 110mm Tee |
| 49 | PVC 110mm Y |
| 50 | Pvc Pipe 75mm Elbow |
| 51 | Pvc Pipe 75mm tee |
| 52 | Pvc Pipe 75mm Y |
| 53 | cpvc Pipe 25mmCoupling |
| 54 | cpvc Pipe 25mmTee p-109 sl-413 i |
| 55 | cpvc Pipe 25mmElbow |
| 56 | G.I25mmGate Valve build p-68 sl-119 |
| 57 | SD 20mm Tap buildp-69 slno-120 |
| 58 | G.I sheet |
| 59 | Fabriction supply and erection of tobulor post with Truss (100mm, 80mm, 75mm) The Rate shall be include the cost of tobulor post Truss members, labour charges for manufacturing and erection and Painting etc., complete. as per departmental specification and drawings. (build p-75 sl -129) |
| 60 | Providing Rain Water Harvesting arrangements in corporation building by inserting of 150mm PVC slotted casing pipe, including earth work excavationfor 900mm precost cement Ring 5nos filling with One, three, Fifth Rings are 40mm metal and Two and Fourth Rings are Sand providing necessary pipe linearrangements eith std specification etc, complete |
| 61 | .Construction of inspection chambers of following sizes with earth work excavation for foundation with 23cm thick brick jelly cement concrete bed in C.M. 1:4:10 using 40mm Brick jelly for foundation, brick work in C.M. 1:6 for chambers, plastering with C.M. 1:3 12mm thick, benching, channelling, 75mm thick RCC loose slab covering in C.M. 1:2:4 mix using 20mm blue granite jelly including necessary reinforcement, etc., complete (60 x 60 x 150cm ) |
| 62 | Supplying and laying Rubberised interlocking Paver block M40 grade 80mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification, |
| 63 | GST 12 % |
AI Tender Summary
Tender Timeline
Jan 05, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender