Empanelment Of Eligible Contractors At Provincial Level And Fixing Of Item Rates For Hilly Areas ( Lift ) Falling In District Baramulla For Execution Of Jal Jeevan Mission ( Jjm ) Works Costing Above 15 Lacs Up To 50 Lacs ( Group Ii ) - -Jammu And Kashmir

Empanelment Of Eligible Contractors At Provincial Level And Fixing Of Item Rates For Hilly Areas ( Lift ) Falling In District Baramulla For Execution Of Jal Jeevan Mission ( Jjm ) Works Costing Above 15 Lacs Up To 50 Lacs ( Group Ii ) - 1 Earth Work In Excavation By Manual Means In Trenches For Foundations Drains, Pipes, Cables Etc. ( Not Exceeding 1.5Mtrin Width And For Shafts, Wells, Cesspits, And The Like Not Exceeding 10Sqm On Plan, Depth Upto 1.5Mtr Including Disposal Of Excavated Earth Upto 1Mt From Cutting Edge, Disposed Earth To Be Leveled And Neatly Dressed In : 2 Earth Work In Excavation By Manual Means Over Areas ( Exceeding 30 Cms And Upto 1.5Mtr In Width As Well As 10 Sqm On Plan ) Including Disposal Of Excavation Earth Upto 1 Mtr For Cutting Edge, Disposal Earth To Be Levelled And Neatly Dressed In Ordinary Rock 3 Laying And Fitting Of G.I. Pipes ( All Classes ) Complete Excluding Cost Of Pipes, Fittings And Earth Work. 4 15Mm Dia G.I Pipes 5 20Mm Dia G.I Pipes 6 25Mm Dia G.I Pipes 7 40Mm Dia G.I Pipes 8 50Mm Dia G.I Pipes 9 65Mm Dia G.I Pipes 10 80Mm Dia G.I Pipes 11 100Mm Dia Gi Pipes 12 Providing And Fixing C.I. Sluice Valves ( With Cap ) Complete With Bolts, Nuts, Rubber Insertions Etc. 100Mm Dia 13 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved, Quality ( Screwed End ) , 80Mm Dia 14 Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Upto 50 M And Lift Upto 1.5 M. 15 Making Connection Of G.I. Distribution Branch With G.I. Main Of Following Sizes By Providing And Fixing Tee, Including Cutting And Threading The Pipe Etc. Complete 16 25 To 40 Mm Nominal Bore 17 40 To 80 Mm Nominal Bore 18 Providing And Laying Of Stone Soling ( Hand Packed ) 19 Providing And Laying Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 20 Providing And Laying In Position Cement Concrete Of Apecified Grade Excluding The Cost Of Centering And Shuttering All Work Upto Plinth Level 1:3:6 ( 1 Cement 3 Coarse Sand 6 Graded Stone Aggregate 40Mm Nominal Size 21 Centering And Shuttering Including Strutting Propping And Removal Of Form Work Etc 22 Foundation 23 For Walls 24 Providing And Fixing Of Ms Bends Of Required Dia And TeeS Including Carraige Of Welding Machine Upto Site Of Work And Fixing At Site Including Cost Of Rubber Gasket / Washers / Nuts Bolts Etc Complete Job 25 Providing Fixing Of 10 To 12Mm Thick Flanges To Gi Pipe Including Cost Of Rubber Washers Nuts Bolts Etc All Work As Complete Job Including Carraiges Of Welding Machine & Gen Set Involving Welding At Site As Per Ground Profile Complete Job 100Mm Dia 26 Providing Fixing Of 10 To 12Mm Thick Flanges To Gi Pipe Including Cost Of Rubber Washers Nuts Bolts Etc All Work As Complete Job Including Carraiges Of Welding Machine & Gen Set Involving Welding At Site As Per Ground Profile Complete Job 80Mm Dia 27 Strctural Steel Work Welded In Built Up Sections, Trusses And Framed Work Includingcutting Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete 28 Providing And Fixing G.I Chain Link Fabric Fencing Of Required Width In Mesh Size 50X50mm Including Strengthening With 2Mm Dia Wire Or Nute , Bolts And Washers As Required Complete As Per Direction Of Engineer - In-Chargemade Of G.I Wire Of Dia 4Mm 29 Applying A Priming Coat Of Water Thinable Cement Primer Of Approvedbrnad And Manufacture On Walls Surface ( Water Thinablecement Primer ) 30 Painting With Redy Mixed Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shades To Give An Even Sahdenew Steel ( Two Or More Caots ) 31 12Mm Cement Plaster 1:4 Mix ( 1 Cement 4 Fine Sand ) 32 Levelling And Dressing Of Ground Of Sr Premises Tube Well Site, By Way Of Earth Work In Excavation And Filling Available Earth In Ditches, Banking And Supply Of Extra Earth, Stacking , Spreading, Levelling, Dressing, Watering, Grassing, Watering And Maintenance For 30 Days Till The Grass Forms A Thick Lawn. Complete Job 33 Carriage Of Material From Source To Site Of Work By Mechnical Transport Including Loading Unloading And Stacking Etc. 34 Below 100Mm Dia Pipe For An Avg Lead Of 12Kms 35 Cement For An Avg Lead Of 12Kms 36 Sand / Aggregate For An Avg Lead 30Kms 37 Stone Soling For An Avg Lead Of 25Kms 38 Steel For An Avg Lead Of 12Kms 39 Carraige Of Pipes From Dumping Site Upto Actual Site Of Work By Manual Labourfor An Avg Lead Of 500Mtr 40 Below 100Mm Dia Pipe 41 Mechanicalcomponents 42 Design, Supply, Installation, Testing And Commissioning Of Horizontal Pump Unit With Necessary Ms Base Frame And Foundation Bolts, Having Following Specifications:Pump:Type: Horizontal Make: Kirloskar / Crompton Greaves Speed: 1450 Rpmdischarge: 20000Gph Dynamic Head: 30Mliquid To Be Handled: Clear Watersuction And Delivery: 80Mm X 65Mm ( Preferably ) Efficiency: Not Less Than 75% At Duty Point Impeller: Bronzeshaft: Stainless Steel Sleeves: Bronzepump Casing: Cast Iron Prime Mover:Type : Horizontal, Ac 3-Phase Induction Motor Make : Kiroskar / Crompton Greavesspeed :1450 Rpmcapacity: Compatible With Pump Head And Discharge.Efficiency : Not Less Than 75% At Duty Point .Test Certificate: The Requisite Material And Test Certificate Of The Offered Equipment Shall Have Tobe Provided To The Department Before The Installation Of Equipment 43 Design, Supply, Installation, Testing And Commissioning Of Horizontal Pump Unit With Necessary Ms Base Frame And Foundation Bolts, Having Following Specifications:Pump:Type: Horizontal Make: Kirloskar / Crompton Greaves Speed: 1450 Rpmdischarge: 20000Gph Dynamic Head: 30Mliquid To Be Handled: Clear Watersuction And Delivery: 80Mm X 65Mm ( Preferably ) Efficiency: Not Less Than 75% At Duty Point Impeller: Bronzeshaft: Stainless Steel Sleeves: Bronzepump Casing: Cast Iron Prime Mover:Type : Horizontal, Ac 3-Phase Induction Motor Make : Kiroskar / Crompton Greavesspeed :1450 Rpmcapacity: Compatible With Pump Head And Discharge.Efficiency : Not Less Than 75% At Duty Point .Test Certificate: The Requisite Material And Test Certificate Of The Offered Equipment Shall Have Tobe Provided To The Department Before The Installation Of Equipment 44 Non-Return Valve:Supply At Site, Installation, Testing & Commissioning Of Nb 150Mm Non Return Valve. The Technical Specifications For The Valve Are As Under:-Nominal Size:-Nb 150Inside & Outside Surface Coating:- Epoxy- Powder Coating ( Ep-P ) Pressure Rating :- Pn16 / Pn1.6 ( Kg / Cm2 / Mpa ) Material For The Valve Partsa ) Body & Cover, Disc :- Ductile Iron ( Ggg-40 ) B ) Disc Sealing :- With Epdm Features Of The Valve1. Soft Sealing.2. Face To Face Length As Per The Standard3. Low Torque For The Operation Of Valve. Acceptable Makes Are : Vag / Ivc / Sigmaflow.The Valve Shall Be Supplied With The Manufacturers Test Certificate Clearly Stating The Testing Pressures For The Body & Seat, & Duration Of Testing. The Nuts & Bolts Required For Fastening Of The Valveshall Be Made Of Ss Material 45 Sluice Valve:Supply At Site, Installation, Testing & Commissioning Of Nb 150Mm Sluice Valve. The Technical Specifications For The Valve Are As Under:- Nominal Size:- Nb 150Inside & Outside Surface Coating:- Epoxy-Powder Coating ( Ep-P ) Pressure Rating :- Pn16 / Pn1.6 ( Kg / Cm2 / Mpa ) Material For The Valve Parts A. Body, Wedge & Bonnet :- Ductile Iron ( Ggg- 40 ) B. Wedge Vulcanized All Over :- With Epdmc. Stem & Nut :- Chrome Steel & Brass Respectivelyfeatures Of The Valve1. Soft Sealing.2. Face To Face Length As Per The Standard 3. Low Torque For The Operation Of Valve.4. Hand Wheel Of Suitable Size With Proper Locking Arrangement With The Stem.5. Mode Of Operation:- Manualacceptable Makes For The Valve Are Vag / Ivc / Sigma Flowthe Valve Shall Be Supplied With The Manufacturers Test Certificate Clearly Stating The Testing Pressures For The Body & Seat, & Durationof Testing. The Nuts & Bolts Required For Fastening Of The Valve Shall Be Made Of Ss Material 46 Supply, Installation, Commissioning Of Foot Value100mm Diameter Kirlosker / Vag Make Including Cost Of Reducer Increaser Washer Nut Bolts Etc. 47 Fabrication, Providing And Fitting Of Suction / Delivery Manifold Out Of 150 / 150 Mm Diameter Ms Pipes, 5.4Mm Thick, With Following Detailsdelivery Side: ( Out Of 150 Mm Diameter ) Fabrication, Providing And Fitting Of Flanged Y- Junction Having Each Arm Not Less Than 1 Meter, Flanged Pipe On Delivery Side 05 Feet Long 01 No Each, Flanged Ms Easy Bend 02 Noany Modification Required At Site For Properfitment / Alignment, And Necessary Nuts, Bolts, Washers Is Included In The Job 48 Providing And Fitting Of Reinforced Flexible Rubber, 6 Layers, 10Mm Thick, Pipe150mm Diameter ( Flanged Both Ends ) 3 M Long Capable To Withheld Pressure Of 16Kgf / Cm2 And Temperature -10 To 500C 49 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro- Mechanical Machinery For Safeguarding The Life Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications:-Composition : Rubber ( Synthetic Mats For Electrical Purpose ) Thickness :- 25Mm Size : - 1M Widemake :- Safe Volt / Joyti The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. Size : - 1M Wide.Make :- Safe Volt / Joyti. 50 Providing, Laying, Fitting And Testing Of Submersible Cable, Multi-Stranded Copper ( 16Mm2 ) Pvc Insulated, Heavy Duty Double Covering Type 51 Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : 1P 55 & Fitted With Accessories As Under:- Change Over Switch:-Qty. = One No.Rating = 63Ampere Type = Front Operated, On Load 4 Poles, 400 + 15% Volts, 50 + 3% C / S.Make = L&Tmodel = Ss95984coco / .Ss95984docorelay Range =13-21 Distribution Buses: - = Electricgrade Aluminum With Red, Blue And Yellow Tapping Of Adequate Section.Rating = 63 Amp. Qty. = 4 No’S.Circuit Breakers:- = Mccb. Qty. = 3 No’Smake = L & Tmodel / Version = Ss95975cofo / . Ss95975dofo, 4P-01 No Incoming & D-Sine Series High Dn0-125D- 02 Nos. ( 63A, 3P ) Outgoingrated Operational Voltage= 415 V+ 15 %Rated Frequency = 50 + / - 3 % Hz Ambient Temperature = 40C° Ultimate S.C Breaking Cap. At ( 415, Ac, 50 Hz ) Main Mccb = 50 Kaoutgoing Mccb = 36Ka Type Of Release = Thermalmagneticoverload Protection = 0.8 – 1 Inadjustableshort-Circuit Protection = 3-6 Inadjustable.Auxiliary For Heating / Lighting Circuit Breaker: Mccbqty. =1No’Smake / Cat = Havel’S / Ihlgsf0063no. Of Poles = 4Prated Current = 63 Amp.Rated Operational Voltage =415 V + 15 %Ultimate S.C Breaking Cap. At ( 415, Ac, 50 Hz ) = 10 Kastarters:-Fully Automatic Star Delta Starters.Make = L&Tmodel = Mug 20 Star / Deltapower Specs= 3 Phase., 415 + 15%V, 50 + 3% Hz.Relay Range = 14 - 23 Ampere. Relay = Mugcontact = Mugbackup Hrc Fuse = Hf-63Ampere.Switch Dis Connector Fuse Unit. =Fn-100Qty. = 03Nos.Ampere Meter:- Size = 96 Mm Sq.Range = 0 – 50 Amp Make = L & T / Rishabhct Coils =Requisite 5 Va – 10 Va Capacity & Ct Ratio.Ct Coils Per Meter = 03 No’S ( Rishbh / L & T ) .Selector Switches Per Meter = 01No. ( Rishbh / L & T ) .Type = Analogous Qty. = 02 No’S. Voltmeter:-Size = 96Mm Sq. Range = 0-500 Volts Type = Analogousmake = L & T / Rishabhselector Switches = 03 No’S ( L &T / Rishabh ) Qty. = 01No’S.Frequency Meter = 0-50 Hz. Type = Analogousmake = L&T / Rishabh Qty. = 01 C. Jobfault Analyzer = Digital Motor Protection Relay With Lcd Displayprotections = Under Voltage, Over Voltage, Under Load, Over Load, Locked Rotor, Current Unbalance, Voltage Unbalance, Phase Failure & Phase Reversal.Display Parameters = Line Voltage, Phase Voltage, Line Current, Frequency, Kw, Kv, Pf, Fault History.Make =Western / Proton / Indsunthe Enclosure Shall Be Of Excellent Finish, Corrosion Resistant Treated And Powder Coated Gliding Hinges For Smooth And Noiseless Movement Of Windows And Latest Locking Arrangements. The Internal Copper Wiring Of The Gadgets Shall Be Flame Retardant And Smokeless And Of Adequate Section.The Panel Shall Be Connected With Main Power Supply Through Voltage Stabilizer And Othernecessary Gadgets, Shall Be Tested On Full Load 52 Supply, Installation Of 35 Mm Sq. 3.5 Core Xlpe Armored Al. Cable Of 1.1 Kv ( 650 / 1100V Grade ) , As Service Line From Sub- Station To The Main Control Panel. The Job Also Including Properthimbling, Tightening Etc 53 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unit With Following Specifications:-Pump:-Make = Ksb / Cri / Kirlosker / Reputed Makedischarge = 4000 Gphhead = 195 Mspeed = 2900 Rpmtype Of Pump = Mixed Flowquality Of Water To Be Handle = Clear Watermeterial Of Construction:Bearing Sleeve =Bronze Gradecasing Wearing Ring =Bronze Grade Discharge Casing =Iron Impeller =Bronze Pump Bowl =Ironpump Shaft = Chromium Steel Suction Casing =Iron Impeller:Impeller Shall Be Of The Enclosed Or Semi – Enclosed Type And Properly Balanced. Pump Shaft:The Pump Shaft Shall Be Guided By Bearings Provided In Each Bowl Or Above And Below The Impeller Shaft Assembly. The Shaft Without Suction Case With Strainer:The Opening In The Suction Case For The Entrance Of The Liquid Shall Be Of Proper Size And Shape To Avoid Eddy Currents. Suction Case Be Fitted With A Strainer Made Of Corrosion – Resistant Material. Coupling:A Suitable Coupling Arrangement Shall Be Provided In Case Of Directly Coupled Pump Set.Motor:-Make = Ksb / Cri / Kirlosker / Reputed Makerating = Suitable For Above Parametrsmethod Of Starting = Star – Delta / Soft Startspeed = 3000 ( Syn ) .Voltage = 415 + 15 % Class Of Insulation = Suitable For Above Rating. The Motor Shall Be Made Of Corrosion Resisting Materials To Resist Corrosion Under Normal Conditions And The Unit Shall Have A Name Plate Giving All Necessary Information. Like Make, Type Of Duty , Frequency, No. Of Phases, Rated Output In Kw / Hp, Rated Voltage Etc And Shall Be Provided With 80 Mm Dia G.I Nipple, 2 Feet Long Dully Threaded On One Side And Flanged With Other Side ( Flange Thickness 18Mm ) . 54 Fabrication, Providing And Fitting Of Washout Arrangement To The Rising Main By Way Of Supply & Fitting Of 80 Mm Nb G.I Flanged Pipe Length ( B-Class ) -6M.The Flange Thickness Shall Be 18Mm And Job Includes Cutting With Gas Cutter A Suitable Size Opening In The Rising Main And Connecting / Welding Of Tail Piece Of Required Size Duly Flanged, On One Side With 18Mm Thick Ms Flange. The Job Further Includes Fitting Of Sluice Valve.The Job Further Includes P / F Of Nuts, Bolts And Ri Washers Etc. As Per Site Requirement. 55 Non-Return Valve: Supply At Site, Installation, Testing & Commissioning Of Nb 100Mm, Non Return Valve, Having The Technical Specifications As Under:-Nominal Size: - Nb 100Mm Inside & Outside Surface Coating: - Epoxy-Powder Coating ( Ep-P ) Pressure Rating: - Pn16 / Pn1.6 ( Kg / Cm2 / Mpa ) Material For The Valve Partsa. Body & Cover, Disc: - Ductile Iron ( Ggg-40 ) B. Disc Sealing :- With Epdm Features Of The Valve1. Soft Sealing. 2. Face To Face Length As Per The Standard 3. Low Torque For The Operation Of Valve.Acceptable Makes For The Valve Are: Vag / Ivc / Sigma Flow / Crithe Valve Shall Be Supplied With The Manufacturers Test Certificate Clearly Stating The Testing Pressures For The Body & Seat, & Duration Of Testing. The Nuts & Bolts Required For Fastening Of The Valve Shall Be Of Good Quality. 56 Sluice Valve:Supply At Site, Installation, Testing & Commissioning Of Sluice Valve Having The Technical Specifications As Under: -Nominal Size: - Nb 100Mm Inside & Outside Surface Coating: - Epoxy-Powder Coating ( Ep-P ) Pressure Rating: - Pn16 / Pn1.6 ( Kg / Cm2 / Mpa ) Material For The Valve Partsa. Body, Wedge & Bonnet :- Ductile Iron ( Ggg-40 ) B. Wedge Vulcanized All Over :- With Epdm C. Stem & Nut :- Chrome Steel & Brass Respectively Features Of The Valve1. Soft Sealing. 2. Face To Face Length As Per The Standard 3. Low Torque For The Operation Of Valve.4. Hand Wheel Of Suitable Size With Proper Locking Arrangement With The Stem.5. Mode Of Operation: - Manual Acceptable Makes For The Valve Are: Vag / Ivc / Sigmaflow / Crithe Valve Shall Be Supplied With The Manufacturers Test Certificate Clearly Stating The Testing Pressures For The Body & Seat, & Duration Of Testing. The Nuts & Bolts Required For Fastening Of The Valve Shall Be Of Good Quality. 57 Air Release Valve: Size : Dn 50Make : Vag / Cri / Sigma Flow / Ivctype : Automatic Air Valve, Vag Duo Jet 264.Operation : Single Chamber Air Valve, Directly Operated By The Flow Medium, High Venting Capacity Up To Sonic Velocity Moc Body & Cover :Ductile Iron En –Js 1030Mic Inner Parts :Floater, Shell Etc. Of Stainless Steelcoating :Inside And Outside Of Epoxy Coating. 58 Providing Of Following Items For Operational Staff For Smooth Functioning Of The Scheme:A ) Four Number Durable And Long Lasting Blankets Made From Wool.B ) Two No. Good Quality Mattress, Quilts, Pillows With Covers For Complete Bedding.C ) 2X ( 12’X12’ ) Excel & 12Mm Thick Thermo Cole For Same Dimensions.D ) 14 Feet Long Bamboo Link Disconnecting / Connecting Rod With Ms Hook-02 Noe ) 20 Feet Long Aluminium / Steel Ladder-01 Nogf Heavy Duty 3-Watt Chargeable Torch Of Reputed Make-02 Nog ) Snow Shoes 2 Pairs.H ) Two No. Pressure Cookers Of 5 Litters Capacity, One No. Tea Pan, 4 No. Glass, 4 Cups, 4Plates, 4Spoons, 2 Jugs, 03 Number Buckets , 5 Litters Handigas Fitted With Burner And Filled With Lpg, Electric Cooking Heater Infrared Type, 2 Litters Collin , 2 No. Brooms For Room Cleaning, 1 No. Wiper, Harpic.03 No. , Plastic Chairs Of Reputed Quality ( 04 No ) , 01 No. Plastic Table 0F Reputed Quality. 59 Fabrication, Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : 1P55 & Fitted With Accessories As Under.A ) Change Over Switch In Open Execution:-Qty. = One No.Rating = 250 Atype = Front Operated, On Load 4 Poles, 415 ± 15% Volts, 50 ± 3% C / S.Make = Havel’S / L&T B ) Distribution Buses:- = Electric Grade Aluminum With Red, Blue And Yellow Tapings Of Adequate Section. Rating = 400 A Qty. = 4 No’S.C ) Circuit Breakers:- = Mccb. Qty. = 04 No’S Make = L & T / Havells / Reputed Makemodel / Version=For Incoming Power Supply ( 01 No ) 4 Poles, 250 Ampere, 50 Ka415 ± 15% Volts, 50 ± 3% C / Sfor Outgoing Power Supply ( 03No ) 3 Poles, 160 Ampere, 36 Ka415 ± 15% Volts, 50 ± 3% C / S D ) Auxiliary For Heating / Lighting Circuit Breaker: = Mccb Qty. = 01 No’S Make = L & T / Havells / Reputed Make 4 Poles, 63 Ampere, 10 Ka415 ± 15% Volts, 50 ± 3% C / Se ) Motor Starters:Qty. = 03Nomake = L&T Type = Mu-G Model = Mu-G 40 ( H ) Motor Rating = Ac-3 Ph., 415 + 15% V, 50 + 3% Hzcoil Voltage = 380Vhrc Fuse = Hf-63 A.Switch Disconnected Fuse Unit. = Fn-100 F ) Ampere Meter:-Size = 96 Mm Sq.Range = 0 – 50 Amake = L & T / Rishabhct Coils = Requisite 5 Va – 10 Va Capacity & Ct Ratio.Ct Coils Per Meter = 03 No’S ( Rishbh / L & T / Ae.Selector Switches Per Meter= 01 No. ( Rishbh / L & T / Ae.Type = Digital Qty. = 02 No’S.G ) Voltmeter:-Size = 96Mm Sq.Range = 0-500 Voltstype = Digitalmake = L & T / Rishabh / Aeselector Switches = 03 No’S ( L & T / Rishabh / Aeqty. = 01No’S.A ) Frequency Meter = 0-50 Hz.Type = Digitalmake = L&T / Rishabh / Aeqty. = 01 C. Jobh ) Fault Analyzer = Digital Motor Protection Relay With Lcd Display Protections = Under Voltage, Over Voltage, Under Load, Over Load, Locked Rotor, Current Unbalance, Voltage Unbalance, Phase Failure & Phase Reversal. Display Parameters = Line Voltage, Phase Voltage, Line Current, Frequency, Kw, Kv, Pf, Fault History. Make = Western / Proton / Indsunthe Enclosure Shall Be Of Excellent Finish, Corrosion Resistant Treated And Powder Coated Gliding Hinges For Smooth And Noiseless Movement Of Windows And Latest Locking Arrangements. The Internal Copper Wiring Of The Gadgets Shall Be Flame Retardant And Smokeless And Of Adequate Section.The Panel Shall Be Connected With Main Power Supply Through Voltage Stabilizer And Other Necessary Gadgets Shall Be Tested On Full Load As Per Site.All Tools And Tackles Required At Site Including P / F Of Required Size Copper Thimbles To Be Crimped With Conductor Using Crimping Tool Etc. Is Included In The Job 60 Designing For The Following Parameters, Supply, Installation, Testing & Commissioning Of A Voltage Controller As Per Technical Specifications Here Under: • Type Of Voltage : Manually Operated Copper Controller : Wound, 3Phase, Ac Powersupply Multi Step ( 6 / 8 Max. ) . Capacity : 50 Kva• Type Of Regulator : Single Plate With Electrolytic Copper Contacts• Input Voltage : 180-380 Volts.• Output Voltage : 415 ± 15%V.• Frequency : 50± 3%Hz.• Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated & Suitable Dried / Oven Dried • Insulation : Fibre Glass Insulations To Tested Parameters.• Cooling :Naturally, Oil Cooled And With Radiators ( Outside The Body ) • Temp. Rise ( Max ) :30°C Above Ambient • Mounting : On Uni-Directional Wheels On Four Corners.• Correction Rate :30 Volts Per Step • Duty Cycle : 100% Continuous.• Enclosure :Pressed Crg Ms Sheet The Enclosure Shall Be Given Anticorrosive Painting Inside And Coating / Enamel Painting Outside The Body• Core Laminates :High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.• Load :3 Phase Induction Motor Load.• Load Amp ( Continuous ) • Overload In 24 :12 Hrs-Hours Operationthe Enclosure Shall Be Painted Outside In White Color Paint The Name Of The Wss, Name Of Supplier, And Date Of Its Supply. The Enclosure Shall Have Drain Plug At An Appropriate Place. 61 Illumination Of Pump House Involves As Followsi ) Providing & Fitting Of Lighting And Fan Points In 1.5 Mm2 Multi Strand Single Core Copper Wire ( Havells-Fr ) Make Carried Through 20Mm Dia.Pvc Conduit; Junction Box, Pvc Conduit Bends, U-Clips And Fitted With 5 / 6-A Piano Type Ssk Switch On Hylum Plate On Wooden Frame ( Box Type ) . 62 Ii ) Providing & Fitting Of 1200Mm Sweep Orient / Bajaj / Havells Make Ceiling Fan Complete In All Respects. Preferred Color Is Dark Brown . 63 Iii ) Providing & Fitting Of Heating Points In 4.0 Mm2 Multi Strand Single Core Copper Wire ( Havells-Fr ) Fitted With 15-A Socket Switch Cabin On Hylum Plate On Wooden Frame ( Box Type ) 64 Iv ) Providing & Fitting Of Pendant Holder With 15 Watt Led Lamps Complete In All Respects 65 V ) Providing & Fitting Of Mcb’S On Main Distribution Board Of Wooden Frame ( Box Type ) With Hylum Plate Fitted With Mcb Of Following Ratings 6A -Sp, 2Nos, 16 A-Dp-2 No’S For Heating Points, & 40A-01No-Tp Mcb ( Mains ) Havells Make. 66 Illumination Of The Pump House Surroundingsi ) Fabrication, Providing, Erection And Fitting Of 8-Meter-Long Ms Tubular Pole Fabricated Out Of 100 Mm Dia Medium Class Ms Pipe With Thickness Of 4.5 Mm, 80Mm Dia Medium Class Ms Pipe With Thickness Of 4.0 Mm With Protruded Cross Arm Out Of 65 Mm Dia Ms Pipe With Thickness Of 3.6 Mm As Per Latest Iee Rules.Ii ) Providing And Fitting Of 100 Watt Led Type Lighting Luminary Horizontal Mounted To Be Operated On 240 Volts , 50 Hz With Ip65 Classification For Outdoor Application With Applicant Height Up To 6 Meters Make Syska / Philips / Bajaj / Crompton / Graves. Iii ) The Job Includes Cost On Account Of: -Earth Work Excavation In All Classification Of Soils For 2X2x3 Feet For Erecting Of Above Pole.Concrete Bottoming.Cost On Account Of Providing, Fitting Of 2 Sq. Mm Copper Conductors To Be Laid In Pvc Conduit From Pole To Pump House. The Job Also Includes Excavation And Back Filling Of The Trench For Lying Of The Above Mentioned Conductor, Earthing Etc. As Per The Site Requirement.Cost On Account Of Providing, Fitting Of 6 Ampere Switch Module Fitted On Hylum Sheet For Controlling Operation In The Pump House As Per The Site Requirement.Application Of Two Primary Coats Of Red Oxide Steel Primer On Ms Tubular Pole Followed By Applying Of The Steel Paint. 47000.00 94000.00 67 P / F Of 750Va Power Inverter Of Apc / Luminous / Exide Make, With 150Mah Chargeable Battery Of Exide / Amroan. The Job Includes P & F Of Necessary Connection Wires Etc. As Per Requirement At Site. 68 Supply, Installation, Testing & Commissioning Of 16Sqmm, Flat Three Core Pvc Insulated & Pvc Sheathed Industrial Cable For Submersible Pump Motors 1.1Kv, Conforming To Is: 694. The Metering On The Outer Pvc Cover Of The Cable Shall Be Duly Marked / Embossed After Every Meter. The Acceptable Makes For The Cable Are Havell’S / Finolex / Gloster / Cri. The Job Is Inclusive Of Providing & Fixing Of Suitable Size Thimbles ( Dowels Make ) Duly Crimped With The Cable Termination Ends By Crimping Tool. 69 Supply, Installation, Testing & Commissioning Of Copper Conductor Power Cable Having The Following Technical Specifications For Internal Connections Of Electrical Gadagets:-19 / 0.064, Single Core, Suitable For Lv 1.1Kv / 650V Grade, Xlpe Insulated, Pvc Inner Sheathed, Armored. Acceptable Makes For The Cable Are Havells / Finolex / Gloster. The Job Is Inclusive Of Providing & Fixing Of Copper Thimbles Duly Crimped With The Cable Termination Ends By Crimping Tool For Making Connection. 70 Supply, Installation, Testing & Commissioning Of Mccb, 250A, 4-Pole, 3-Phase 415 ± 15% Volts., Frequency : 50± 3% C / S., 35 / 36 Ka Breaking Capacity. The Mccb Shall Be Housed In A Panel Fabricated Out Of 14Swg; Duly Given Two Coats Of Grey Color Powder Coating, The Door Of The Panel Shall Have A Locking Arrangement. The Panel Shall Be Installed On Angle / Channel Structure, As Per The Direction Of The Site Engineer. The Acceptable Makes Are Havell’S / L&T. 71 Bio-Toilet:-Providing / Construction / Installation / Commissioning Of Onsite Brick Masonry Constructed / Pre Cast, Reinforced Concrete Constructed / Fiber Reinforced Plastic Constructed Toilet Block With Bio Digester And Super Structure Shall Have The General Specifications. On Site Constructed / Factory Made Single Unit / Panelled Form As Per Site Requirementeasy To Maintain And Cleanall Weather Protectionwell Ventilatedshall Have No Effect On Natural Climaty With Regard To Effluent Drawn Outshall Be Feasible For Operation Under -15-Degree Celsius Temperature.Technical Specifications For Onsite Constructed / Pre Cast Rcc Toilet Super Structuretoilet Block Size – 4Ft X 4Ft X 8Ftmaterial – Precast Concrete M25, On Site – Brick Masonry Or Fiberreinforced Plastic Desired Features Of Toilet Block:Tiles –Up To 3Ft On Inside Walls Or As Material Of Constructionfloor – Tiles Or As Material Of Constructionpaint On Outside Walls & Inside Walls As Per Material Of Constructionwestern Toilet Seat L All Made Of Ceramic ( As Per Requirement ) Taps & Flushing System - Water Tap At A Nominal Height Of Minimum 13 Inches For Orissa Pan. Flushing Systemelectric Wire To Connect The Bulbstand For Water Tank – Mild Steel Of Isa 40 X 40 X 5 Mm With Cgi Roof And Proper Frost Protection During Winter.Door – Pvc / Al / Frp Any Other Water Proof Material. Water Tank Capacity -300 Litres Of Hdpe ( With An Openable Lid ) For The Supply Of Water. To Be Placed On Top With Suitable Framehand Washing Basin With Tap Etc. Technical Specifications For Sanitation Unit For Solid Waste Management ( Bio Digester ) Capacity Of Bio Digester- 900 Ltrdesign - With Four Chambers To Ensure Long Hydraulic Retention Time Construction Of Bio Digester – Upvc / On Site Concrete Constructed / Any Other Chemically Inactive Materialcatalyst – Highly Effective Bio Catalyst.Inoculum - The Cocktail Of Bacteria Duly Certified By Drde Of 30 % Of The Volume Of The Digesterbio Digester Lining – Inert Vulcanized 1.0Mm Thick Butyl / Epdm Rubber Ce Marked And Non-Woven Geo Textile For Bacteria Retention Thickness Of Lining – 2Mmmaterial Of Portion Waffle – Concrete / Any Other Chemically Inactive Material Lifting – Lugs 3 – 4 People Usage Further Job Includes All Types Of Works Like Earth Work Excavation For Bio Digester, Carriage, Transportation, Handling, Pipes For Inlet Connection For Tank, Other Pipes Etc. For Disposal Of Effluents As Per Latest Govt Norms, Electric Connection, Lock Etc.

INR 1000 /-

INR 25000.0 /-

Refer document

Name of Work: Empanelment of Eligible Contractors at Provincial level and fixing of item rates for HILLY LIFT AREA in District Baramulla for Execution of Jal Jeevan Mission (JJM) works costing from Rs 15.00 lacs upto Rs. 50 lacs (GROUP II) including water supply schemes mentioned in the section II of detailed ENIT Document

Sl. No.	Item Description
1	Earth work in Excavation by manual means in trenches for foundations drains, pipes, cables etc.(not exceeding 1.5mtrin width and for shafts, wells, cesspits, and the like not exceeding 10sqm on plan, depth upto 1.5mtr including disposal of excavated earth upto 1mt from cutting edge, disposed earth to be leveled and neatly dressed in :
2	Earth work in excavation by manual means over areas ( exceeding 30 cms and upto 1.5mtr in width as well as 10 sqm on Plan) including disposal of excavation earth upto 1 mtr for cutting edge, disposal earth to be levelled and neatly dressed in ordinary rock
3	Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.
4	15mm dia G.I pipes
5	20mm dia G.I pipes
6	25mm dia G.I pipes
7	40mm dia G.I pipes
8	50mm dia G.I pipes
9	65mm dia G.I pipes
10	80mm dia G.I pipes
11	100mm Dia GI Pipes
12	Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. 100mm Dia
13	Providing and fixing gun metal gate valve with C.I. wheel of approved, quality (screwed end), 80mm Dia
14	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
15	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
16	25 to 40 mm nominal bore
17	40 to 80 mm nominal bore
18	Providing and laying of stone soling ( hand packed )
19	Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
20	Providing and laying in position cement concrete of apecified grade excluding the cost of centering and shuttering all work upto Plinth level 1:3:6 ( 1 cement 3 coarse sand 6 graded stone aggregate 40mm nominal size
21	Centering and shuttering including strutting propping and removal of form work etc
22	Foundation
23	For Walls
24	Providing and fixing of MS bends of required dia and Tee"s including carraige of welding machine upto site of work and fixing at site including cost of rubber gasket/washers/nuts bolts etc complete job
25	Providing fixing of 10 to 12mm thick flanges to GI pipe including cost of rubber washers nuts bolts etc all work as complete job including carraiges of welding machine & Gen set involving welding at site as per ground profile complete job 100mm dia
26	Providing fixing of 10 to 12mm thick flanges to GI pipe including cost of rubber washers nuts bolts etc all work as complete job including carraiges of welding machine & Gen set involving welding at site as per ground profile complete job 80mm dia
27	Strctural steel work welded in built up sections, trusses and framed work includingcutting hoisting, fixing in position and applying a priming coat of approved steel primer all complete
28	Providing and fixing G.I chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nute , bolts and washers as required complete as per direction of Engineer - In-ChargeMade of G.I Wire of dia 4mm
29	Applying a priming coat of water thinable cement primer of approvedbrnad and manufacture on walls surface ( water thinablecement primer )
30	Painting with redy mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even sahdeNew steel ( two or more caots )
31	12mm cement plaster 1:4 mix ( 1 cement 4 fine sand )
32	Levelling and dressing of ground of SR premises tube well site, by way of earth work in excavation and filling available earth in ditches, banking and supply of extra earth, stacking , spreading, levelling, dressing, watering, grassing, watering and maintenance for 30 days till the grass forms a thick lawn. Complete Job
33	carriage of material from source to site of work by Mechnical Transport including loading unloading and stacking etc.
34	Below 100mm dia pipe for an avg lead of 12kms
35	Cement for an avg lead of 12kms
36	Sand/ Aggregate for an avg lead 30kms
37	Stone Soling for an avg lead of 25kms
38	Steel for an avg lead of 12kms
39	Carraige of pipes from dumping site upto actual site of work by manual labourfor an avg lead of 500mtr
40	Below 100mm dia pipe
41	MechanicalComponents
42	Design, supply, installation, testing and commissioning of Horizontal Pump unit with necessary MS base frame and foundation bolts, having following specifications:Pump:Type: Horizontal Make: Kirloskar / Crompton Greaves Speed: 1450 RPMDischarge: 20000GPH Dynamic head: 30mLiquid to be handled: Clear WaterSuction and delivery: 80mm x 65mm (preferably) Efficiency: not less than 75% at duty point Impeller: BronzeShaft: Stainless steel Sleeves: BronzePump casing: Cast Iron Prime Mover:Type : Horizontal, AC 3-phase induction Motor Make : Kiroskar / Crompton GreavesSpeed :1450 RPMCapacity: Compatible with Pump head and discharge.Efficiency : not less than 75% at duty point .Test certificate: The requisite material and test certificate of the offered equipment shall have tobe provided to the department before the installation of equipment
43	Design, supply, installation, testing and commissioning of Horizontal Pump unit with necessary MS base frame and foundation bolts, having following specifications:Pump:Type: Horizontal Make: Kirloskar / Crompton Greaves Speed: 1450 RPMDischarge: 20000GPH Dynamic head: 30mLiquid to be handled: Clear WaterSuction and delivery: 80mm x 65mm (preferably) Efficiency: not less than 75% at duty point Impeller: BronzeShaft: Stainless steel Sleeves: BronzePump casing: Cast Iron Prime Mover:Type : Horizontal, AC 3-phase induction Motor Make : Kiroskar / Crompton GreavesSpeed :1450 RPMCapacity: Compatible with Pump head and discharge.Efficiency : not less than 75% at duty point .Test certificate: The requisite material and test certificate of the offered equipment shall have tobe provided to the department before the installation of equipment
44	Non-Return Valve:Supply at site, Installation, testing & commissioning of NB 150mm Non return valve. The technical specifications for the valve are as under:-Nominal size:-NB 150Inside & outside Surface Coating:- Epoxy- powder coating (EP-P)Pressure Rating :- PN16/PN1.6 (kg/cm2/MPa)Material for the valve partsa) Body & cover, disc :- Ductile Iron (GGG-40)b) Disc sealing :- with EPDM Features of the valve1. Soft sealing.2. Face to Face length as per the standard3. Low torque for the operation of valve. Acceptable makes are : VAG/IVC/Sigmaflow.The valve shall be supplied with the manufacturers test certificate clearly stating the testing pressures for the body & seat, & duration of testing. The nuts & bolts required for fastening of the valveshall be made of SS material
45	Sluice Valve:Supply at site, Installation, testing & commissioning of NB 150mm sluice valve. The technical specifications for the valve are as under:- Nominal size:- NB 150Inside & outside Surface Coating:- Epoxy-powder coating (EP-P)Pressure Rating :- PN16/PN1.6(kg/cm2/MPa) Material for the valve parts a. Body, Wedge & bonnet :- Ductile Iron (GGG- 40)b. Wedge vulcanized all over :- with EPDMc. Stem & nut :- Chrome steel & brass respectivelyFeatures of the valve1. Soft sealing.2. Face to Face length as per the standard 3. Low torque for the operation of valve.4. Hand wheel of suitable size with proper locking arrangement with the stem.5. Mode of Operation:- ManualAcceptable makes for the valve are VAG/IVC/Sigma flowThe valve shall be supplied with the manufacturers test certificate clearly stating the testing pressures for the body & seat, & durationof testing. The nuts & bolts required for fastening of the valve shall be made of SS material
46	Supply, installation, commissioning of foot value100mm diameter Kirlosker/VAG make including cost of reducer increaser washer nut bolts etc.
47	Fabrication, providing and fitting of Suction/ delivery manifold out of 150/150 mm diameter MS pipes,5.4mm thick, with following detailsDelivery side: (out of 150 mm diameter) Fabrication, providing and fitting of flanged Y- junction having each arm not less than 1 meter, flanged pipe on delivery side 05 feet long 01 No each, flanged MS easy bend 02 NoAny modification required at site for properfitment/ alignment, and necessary nuts, bolts, washers is included in the job
48	Providing and fitting of reinforced flexible rubber,6 layers, 10mm thick, pipe150mm diameter (flanged both ends) 3 M long capable to withheld pressure of 16kgf/cm2 and temperature -10 to 500C
49	Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro- mechanical machinery for safeguarding the life of the workmen due to possible leakage of current & short circuit. The floor surface shall be made good & shall be free from dust, grease, foreign material & moisture free. The mats shall be as per IS 15652:2006 & shall have the following specifications:-Composition : Rubber (synthetic mats for electrical purpose)Thickness :- 25mm Size : - 1M wideMake :- Safe Volt/Joyti The rubber mats shall be accepted with manufacturers test certificate. Size : - 1M wide.Make :- Safe Volt/Joyti.
50	Providing, laying, fitting and testing of submersible cable, multi-stranded copper (16mm2)PVC insulated, heavy duty double covering type
51	Providing and fitting of Modular control panel of appropriate size fabricated out of 14 SWG sheet having required openings / vents and protection Class : 1P 55 & fitted with accessories as under:- Change over Switch:-Qty. = One No.Rating = 63Ampere Type = Front operated,On load 4 poles, 400 + 15% volts,50 + 3% C/S.Make = L&TModel = SS95984COCO/.SS95984DOCORelay range =13-21 Distribution buses: - = Electricgrade Aluminum with red, blue and yellow tapping of adequate section.Rating = 63 Amp. Qty. = 4 No’s.Circuit Breakers:- = MCCB. Qty. = 3 No’sMake = L & TModel/Version = SS95975COFO/. SS95975DOFO,4P-01 No incoming & D-sine series High DN0-125D- 02 Nos.(63A, 3p) outgoingRated operational voltage= 415 V+ 15 %Rated frequency = 50 +/- 3 % Hz Ambient temperature = 40C° Ultimate S.C Breaking Cap. at(415, ac, 50 Hz)Main MCCB = 50 KAOutgoing MCCB = 36KA Type of release = ThermalMagneticOverload protection = 0.8 – 1 inadjustableShort-circuit protection = 3-6 inadjustable.Auxiliary for Heating/Lighting Circuit Breaker: MCCBQty. =1No’sMake/CAT = Havel’s/IHLGSF0063No. of poles = 4PRated Current = 63 Amp.Rated operational voltage =415 V + 15 %Ultimate S.C Breaking Cap. at (415, ac, 50 Hz)= 10 KAStarters:-fully automatic Star delta starters.Make = L&TModel = MUG 20 Star/ DeltaPower specs= 3 phase., 415 + 15%V, 50 + 3% Hz.Relay Range = 14 - 23 Ampere. Relay = MUGContact = MUGBackup HRC fuse = HF-63Ampere.Switch dis connector fuse unit. =FN-100Qty. = 03NoS.Ampere Meter:- Size = 96 mm Sq.Range = 0 – 50 AMP Make = L & T / RishabhCT Coils =Requisite 5 VA – 10 VA capacity & CT ratio.CT coils per meter = 03 No’s (Rishbh / L & T).Selector Switches per meter = 01No.(Rishbh / L & T).Type = Analogous Qty. = 02 No’s. Voltmeter:-Size = 96mm Sq. Range = 0-500 volts Type = AnalogousMake = L & T / RishabhSelector Switches = 03 No’s (L &T / Rishabh)Qty. = 01No’s.Frequency meter = 0-50 Hz. Type = AnalogousMake = L&T / Rishabh Qty. = 01 C. JobFault Analyzer = Digital Motor Protection Relay with LCD DisplayProtections = Under Voltage, Over Voltage, Under Load, Over Load, Locked Rotor, Current unbalance, Voltage Unbalance, Phase failure & Phase reversal.Display Parameters = Line Voltage, Phase Voltage, Line Current,Frequency, KW, KV, PF, Fault history.Make =Western/Proton/INDSUNThe enclosure shall be of excellent finish, corrosion resistant treated and powder coated gliding hinges for smooth and noiseless movement of windows and latest locking arrangements. The internal copper wiring of the Gadgets shall be flame retardant and smokeless and of adequate section.The panel shall be connected with main power supply through voltage stabilizer and othernecessary gadgets, shall be tested on full load
52	Supply, Installation of 35 mm Sq. 3.5 core XLPE Armored Al. Cable of 1.1 KV(650/1100V Grade), as service line from sub- station to the main control panel. The job also including properthimbling, tightening etc
53	Supply, Installation, Testing & Commissioning of Submersible Pumping unit with following specifications:-PUMP:-Make = KSB / CRI/Kirlosker/Reputed makeDischarge = 4000 GPHHead = 195 MSpeed = 2900 RpmType of pump = Mixed flowQuality of Water to be handle = clear waterMETERIAL OF CONSTRUCTION:Bearing Sleeve =Bronze gradeCasing wearing ring =Bronze grade Discharge casing =Iron Impeller =Bronze Pump Bowl =IronPump Shaft = Chromium steel Suction Casing =Iron IMPELLER:Impeller shall be of the enclosed or semi – enclosed type and properly balanced. PUMP SHAFT:The pump shaft shall be guided by bearings provided in each bowl or above and below the impeller shaft assembly. The shaft without SUCTION CASE WITH STRAINER:The opening in the suction case for the entrance of the liquid shall be of proper size and shape to avoid eddy currents. Suction case be fitted with a strainer made of corrosion – resistant material. COUPLING:A suitable coupling arrangement shall be provided in case of directly coupled pump set.MOTOR:-Make = KSB / CRI/Kirlosker/Reputed makeRating = suitable for above parametrsMethod of starting = Star – Delta/Soft startSpeed = 3000 (Syn).Voltage = 415 + 15 % Class of insulation = Suitable for above rating. The motor shall be made of corrosion resisting materials to resist corrosion under normal conditions and the unit shall have a name plate giving all necessary information. Like Make, Type of duty ,Frequency, No. of phases, Rated output in KW/HP, Rated voltage etc and shall be provided with 80 mm dia G.I nipple,2 feet long dully threaded on one side and flanged with other side(flange thickness 18mm).
54	Fabrication, Providing and fitting of washout arrangement to the rising main by way of supply & fitting of 80 mm NB G.I flanged pipe length (B-class)-6M.The flange thickness shall be 18mm and Job includes cutting with gas cutter a suitable size opening in the rising main and connecting/welding of tail piece of required size duly flanged, on one side with 18mm thick MS flange. The job further includes fitting of sluice valve.The job further includes P/F of nuts, bolts and RI washers etc. as per site requirement.
55	Non-return valve: Supply at site, Installation, testing & commissioning of NB 100mm, Non return valve, having the technical specifications as under:-Nominal size: - NB 100mm Inside & outside Surface Coating: - Epoxy-powder coating (EP-P) Pressure Rating: - PN16/PN1.6 (kg/cm2/MPa) Material for the valve partsa. Body & cover, disc: - Ductile Iron (GGG-40)b. Disc sealing :- with EPDM Features of the valve1. Soft sealing. 2. Face to Face length as per the standard 3. Low torque for the operation of valve.Acceptable makes for the valve are: VAG/IVC /Sigma flow/CRIThe valve shall be supplied with the manufacturers test certificate clearly stating the testing pressures for the body & seat, & duration of testing. The nuts & bolts required for fastening of the valve shall be of good quality.
56	Sluice Valve:Supply at site, Installation, testing & commissioning of sluice valve having the technical specifications as under: -Nominal size: - NB 100mm Inside & outside Surface Coating: - Epoxy-powder coating (EP-P) Pressure Rating: - PN16/PN1.6 (kg/cm2/MPa) Material for the valve partsa. Body, Wedge & bonnet :- Ductile Iron (GGG-40)b. Wedge vulcanized all over :- with EPDM c. Stem & nut :- Chrome steel & brass respectively Features of the valve1. Soft sealing. 2. Face to Face length as per the standard 3. Low torque for the operation of valve.4. Hand wheel of suitable size with proper locking arrangement with the stem.5. Mode of Operation: - Manual Acceptable makes for the valve are: VAG/IVC/Sigmaflow/CRIThe valve shall be supplied with the manufacturers test certificate clearly stating the testing pressures for the body & seat, & duration of testing. The nuts & bolts required for fastening of the valve shall be of good quality.
57	Air Release valve: size : DN 50Make : VAG/CRI/Sigma flow/IVCType : Automatic Air Valve, VAG Duo jet 264.Operation : Single chamber air valve, directly operated by the flow medium, high venting capacity up to sonic velocity MOC Body & Cover :Ductile iron EN –JS 1030MIC inner Parts :Floater, shell etc. of stainless steelCoating :Inside and outside of epoxy coating.
58	Providing of following items for operational staff for smooth functioning of the scheme:a) four number durable and long lasting Blankets made from wool.b) Two No. good quality mattress, quilts, pillows with covers for complete bedding.c) 2x(12’x12’) excel & 12mm thick thermo Cole for same dimensions.d) 14 feet long bamboo link disconnecting/connecting rod with MS hook-02 Noe) 20 feet long aluminium/steel ladder-01 Nogf Heavy duty 3-watt chargeable torch of reputed make-02 Nog) Snow shoes 2 pairs.h)Two No. pressure cookers of 5 litters capacity, one No. tea pan, 4 No. glass,4 cups, 4plates, 4spoons, 2 jugs, 03 number buckets ,5 litters handigas fitted with burner and filled with LPG, Electric cooking heater infrared type, 2 litters Collin , 2 No. brooms for room cleaning, 1 No. wiper, harpic.03 No. , Plastic chairs of reputed quality(04 No),01 No. Plastic table 0f reputed quality.
59	Fabrication, Providing and fitting of Modular control panel of appropriate size fabricated out of 14 SWG sheet having required openings / vents and protection Class : 1P55 & fitted with accessories as under.a)Change over Switch in open execution:-Qty. = One No.Rating = 250 AType = Front operated, On load 4 poles, 415 ± 15% volts, 50 ± 3% C/S.Make = Havel’s/L&T b) Distribution buses:- = Electric grade Aluminum with red, blue and yellow tapings of adequate section. Rating = 400 A Qty. = 4 No’s.c) Circuit Breakers:- = MCCB. Qty. = 04 No’s Make = L & T/Havells/Reputed makeModel/Version=For incoming power supply (01 NO) 4 poles,250 Ampere,50 KA415 ± 15% volts, 50 ± 3% C/SFor Outgoing power supply (03NO)3 poles,160 Ampere,36 KA415 ± 15% volts, 50 ± 3% C/S d) Auxiliary for Heating/Lighting Circuit Breaker: = MCCB Qty. = 01 No’s Make = L & T/Havells/Reputed make 4 poles,63 Ampere,10 KA415 ± 15% volts, 50 ± 3% C/SE) Motor starters:Qty. = 03NoMake = L&T Type = MU-G Model = MU-G 40(H)Motor rating = AC-3 ph., 415 + 15% V, 50 + 3% HzCoil Voltage = 380VHRC Fuse = HF-63 A.Switch disconnected fuse unit. = FN-100 f)Ampere Meter:-Size = 96 mm Sq.Range = 0 – 50 AMake = L & T / RishabhCT Coils = Requisite 5 VA – 10 VA capacity & CT ratio.CT coils per meter = 03 No’s (Rishbh / L & T/AE.Selector Switches per meter= 01 No. (Rishbh / L & T/AE.Type = Digital Qty. = 02 No’s.g)Voltmeter:-Size = 96mm Sq.Range = 0-500 voltsType = DigitalMake = L & T / Rishabh/AESelector Switches = 03 No’s (L & T / Rishabh/AEQty. = 01No’s.a) Frequency meter = 0-50 Hz.Type = DigitalMake = L&T / Rishabh/AEQty. = 01 C. Jobh) Fault Analyzer = Digital Motor Protection Relay with LCD Display Protections = Under Voltage, Over Voltage, Under Load, Over Load, Locked Rotor, Current unbalance, Voltage Unbalance, Phase failure & Phase reversal. Display Parameters = Line Voltage, Phase Voltage, Line Current,Frequency, KW, KV, PF, Fault history. Make = Western/Proton/INDSUNThe enclosure shall be of excellent finish, corrosion resistant treated and powder coated gliding hinges for smooth and noiseless movement of windows and latest locking arrangements. The internal copper wiring of the Gadgets shall be flame retardant and smokeless and of adequate section.The panel shall be connected with main power supply through voltage stabilizer and other necessary gadgets shall be tested on full load as per site.All tools and tackles required at site including P/F of required size copper thimbles to be crimped with conductor using crimping tool etc. is included in the job
60	Designing for the following parameters, Supply, Installation, Testing & commissioning of a voltage controller as per technical specifications here under: • Type of voltage : Manually operated copper Controller : wound, 3phase, AC powerSupply multi step (6/8 max.). Capacity : 50 KVA• Type of Regulator : Single plate with Electrolytic copper contacts• Input voltage : 180-380 volts.• Output voltage : 415 ± 15%V.• Frequency : 50± 3%HZ.• Windings : Electrolytic grade copper of adequate section, vacuum impregnated & suitable dried /oven dried • Insulation : Fibre glass insulations to Tested parameters.• Cooling :Naturally, Oil cooled and with radiators (outside the body) • Temp. Rise (Max) :30°C above ambient • Mounting : on uni-directional wheels on four corners.• Correction rate :30 volts per step • Duty cycle : 100% continuous.• Enclosure :Pressed CRG MS sheet the enclosure shall be given anticorrosive painting inside and coating/enamel painting outside the body• Core laminates :High grade, low eddy loss, grain oriented silicon steel laminations.• Load :3 phase induction motor load.• Load Amp (continuous) • Overload in 24 :12 Hrs-hours operationThe enclosure shall be painted outside in white color paint the name of the WSS, Name of supplier, and date of its supply. The enclosure shall have drain plug at an appropriate place.
61	illumination of pump house involves as followsi)Providing & Fitting of lighting and fan points in 1.5 mm2 multi strand single core copper wire (Havells-FR) make carried through 20mm dia.PVC conduit; junction box, pvc conduit bends, U-clips and fitted with 5/6-A piano type SSK switch on Hylum plate on wooden frame (Box Type).
62	ii)Providing & Fitting of 1200mm sweep Orient/Bajaj/Havells make ceiling fan complete in all respects. Preferred color is dark brown .
63	iii)Providing & Fitting of heating points in 4.0 mm2 multi strand single core copper wire (Havells-FR) fitted with 15-A socket switch cabin on Hylum plate on wooden frame(Box Type)
64	iv)Providing & Fitting of Pendant holder with 15 watt LED lamps complete in all respects
65	v)Providing & Fitting of MCB’S on main distribution board of wooden frame(Box Type) with Hylum plate fitted with MCB of following ratings 6A -SP, 2nos, 16 A-DP-2 no’s for heating points, & 40A-01no-TP MCB (mains) Havells make.
66	Illumination of the pump house surroundingsI) Fabrication, providing, erection and fitting of 8-meter-long MS tubular pole fabricated out of 100 mm Dia medium class MS pipe with thickness of 4.5 mm, 80mm Dia medium class MS pipe with thickness of 4.0 mm with protruded cross arm out of 65 mm Dia MS pipe with thickness of 3.6 mm as per latest IEE rules.II) Providing and Fitting of 100 Watt LED type lighting luminary horizontal mounted to be operated on 240 volts ,50 Hz with IP65 classification for outdoor application with applicant height up to 6 meters make SYSKA /Philips/ Bajaj/ Crompton / Graves. III) The job includes cost on account of: -Earth work excavation in all classification of soils for 2x2x3 feet for erecting of above pole.Concrete bottoming.Cost on account of providing, fitting of 2 Sq. mm copper conductors to be laid in PVC conduit from pole to pump house. The job also includes excavation and back filling of the trench for lying of the above mentioned conductor, earthing etc. as per the site requirement.Cost on account of providing, fitting of 6 Ampere switch module fitted on Hylum sheet for controlling operation in the pump house as per the site requirement.Application of two primary coats of red oxide steel primer on MS tubular pole followed by applying of the steel paint. 47000.00 94000.00
67	P/F of 750VA power inverter of APC /luminous / Exide make, with 150mAH chargeable battery of Exide/Amroan. The job includes p & f of necessary connection wires etc. as per requirement at site.
68	Supply, Installation, Testing & Commissioning of 16Sqmm, Flat Three Core PVC Insulated & PVC Sheathed Industrial cable for Submersible Pump Motors 1.1KV, conforming to IS: 694. The metering on the outer PVC cover of the cable shall be duly marked/embossed after every meter. The acceptable makes for the cable are Havell’s /Finolex/Gloster/CRI. The job is inclusive of Providing & fixing of suitable size thimbles (Dowels make) duly crimped with the cable termination ends by crimping tool.
69	Supply, Installation, Testing & Commissioning of Copper conductor power cable having the following technical specifications for internal connections of electrical gadagets:-19/0.064, single Core, suitable for LV 1.1KV/650V grade, XLPE Insulated, PVC inner sheathed, Armored. Acceptable makes for the cable are Havells/Finolex/Gloster. The job is inclusive of Providing & fixing of copper thimbles duly crimped with the cable termination ends by crimping tool for making connection.
70	Supply, Installation, Testing & Commissioning of MCCB, 250A, 4-pole, 3-phase 415 ± 15% volts., Frequency : 50± 3% C/S., 35/36 KA breaking capacity. The MCCB shall be housed in a panel fabricated out of 14SWG; duly given two coats of grey color powder coating, the door of the panel shall have a locking arrangement. The panel shall be installed on angle/channel structure, as per the direction of the site Engineer. The acceptable makes are Havell’s/L&T.
71	Bio-Toilet:-Providing / construction /installation /commissioning of onsite brick masonry constructed / Pre cast, Reinforced concrete constructed / Fiber Reinforced Plastic constructed toilet block with Bio digester and super structure shall have the General specifications. On site constructed / Factory made Single unit / panelled form as per site requirementEasy to maintain and cleanAll weather protectionWell ventilatedShall have no effect on natural climaty with regard to Effluent drawn outShall be feasible for operation under -15-degree Celsius temperature.Technical Specifications for onsite constructed / Pre cast RCC toilet super structureToilet Block Size – 4ft x 4ft x 8ftMaterial – Precast concrete M25, on site – brick masonry or FiberReinforced Plastic Desired Features of toilet block:Tiles –up to 3ft on inside walls or as material of constructionFloor – Tiles or as material of constructionPaint on outside walls & inside walls as per material of constructionWestern Toilet Seat l all made of ceramic (as per requirement)Taps & Flushing system - Water tap at a nominal height of minimum 13 inches for Orissa Pan. Flushing systemElectric Wire to connect the bulbStand for water tank – Mild Steel of ISA 40 x 40 x 5 mm with CGI roof and proper frost protection during winter.Door – PVC / AL / FRP any other water proof material. Water tank Capacity -300 litres of HDPE (with an openable lid) for the supply of water. To be placed on top with suitable frameHand washing basin with Tap etc. Technical Specifications for Sanitation Unit for Solid waste management (Bio Digester)Capacity of Bio digester- 900 LtrDesign - With four chambers to ensure long hydraulic retention time Construction of Bio Digester – UPVC / On site concrete constructed / any other chemically inactive materialCatalyst – Highly effective Bio Catalyst.Inoculum - The cocktail of bacteria duly certified by DRDE of 30 % of the volume of the digesterBio digester Lining – Inert vulcanized 1.0mm thick Butyl/EPDM rubber CE Marked and non-woven geo textile for bacteria retention Thickness of Lining – 2mmMaterial of Portion waffle – concrete / any other chemically inactive material Lifting – lugs 3 – 4 people usage Further job includes all types of works like earth work excavation for bio digester, carriage, transportation, handling, pipes for inlet connection for tank, other pipes etc. for disposal of effluents as per latest Govt norms, electric connection, lock etc.