Deposit Work Deposit Work - Pwd Rwss To Udumbanchola And Amp- Rwss To Rajakkad-Rajakumari - Shifting Of Water Supply Pipelines In The Stretch Between Udumbanchola And Chithrapuram Road Due To Road Development Work By Kiifb
Tender Value
25.96 Lakhs
Estimated cost
Bid Submission
10 Jan 2022
0 days left
EMD
39000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
udumbanchola → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Deposit Work Deposit Work - Pwd Rwss To Udumbanchola And Amp- Rwss To Rajakkad-Rajakumari - Shifting Of Water Supply Pipelines In The Stretch Between Udumbanchola And Chithrapuram Road Due To Road Development Work By Kiifb
BOQ
| Sl. No. | Item Description |
| 1 | WORKING CHARGES |
| 2 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil |
| 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :\"Ordinary Rock. |
| 4 | Fencing one side of trenches, 1.50 m height with two rows of 10 cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2 m intervals |
| 5 | Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. |
| 6 | Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329excluding cost of pipes and specials :80 mm dia Ductile Iron Class K-9 Pipes |
| 7 | Laying in position S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc. ( excluding cost of specials). |
| 8 | Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 80 mm dia pipes |
| 9 | Testing 80mm DI/CI pipeline with potable water to the required test pressure . 80 mm dia |
| 10 | Laying UPVC pipesof class 2 to class 6 andspecials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure(excluding cost of pipes and specials). 90 mm nominal outer dia pipes.\" |
| 11 | Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. but excluding cost of pipes and fittings - External work. 15 mm dia nominal bore |
| 12 | Replacing the chocked / damaged 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing mains, up to a length of 5m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / Brass specials viz. brass ferrule, Elbow,MTA, FTA, couplers etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, safely removing & re-fixing existing water meter,lighting, watching, providingcaution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges but excluding cost of water meter and meter box and excluding charges for cutting the concrete / tarred / bituminous roads and as per the directions of the department officers. |
| 13 | Providing tap connection by supplying and laying 20mm GI pipe(M) to an average length of 2.3m and specials (as per IS specification)such as 20mm W/N tap ,20mm GI union ,20mm GI elbow ,approapriate size and type of saddle clamp ,20mm hex nipple etc including all cost of materials and labour charges for exposing the pipe line ,cutting,threading ,laying and jointing GI pipe and specials ,providing the tap connection as directed by departmental officers |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 15 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 16 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 17 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars |
| 18 | \"Conveying and fixing C.I. sluice valves (with cap)by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :80 mm diameter. Class I\" |
| 19 | Conveying and fixing C I Single acting AirValve of approved qualitywith bolts,nuts,rubber insertions etc . excluding the cost of airvalve(the tail pieces if required will be paid seperately): 25 mmSingle acting Air Valve |
| 20 | Interconnection of 90mm PVC pipe with 63mm PVC pipe using PN-16 Specials & with necessary 75mm PVC pipe 10kg/cm2 |
| 21 | cost of materials |
| 22 | Supply of uPVC Pipe, IS 4985:2000 , 6kg/cm2, 90mm Dia. |
| 23 | Supply of uPVC Pipe, IS 4985:2000 , 10kg/cm2, 90mm Dia. |
| 24 | Cost ofS & S C.I standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class): Upto 300 mm dia |
| 25 | Supply of specials for PVC Pipe, PN-16, 90mm PVC Bend |
| 26 | Supply of 90mm CIR Joint |
| 27 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 80mm Dia. |
| 28 | Supply of 15 mm GI pipe |
| 29 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 80mm. |
| 30 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm. |
| 31 | Supply of 80 mm MS Flange |
| 32 | Cost of 90 mm PVC tail piece |
AI Tender Summary
Tender Timeline
Jan 04, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender