municipality has published Bhavani Municipality Supply, Delivery And Erection Of Of Vertical Turbine Motor Pump Set In Head Water Works Supply, Delivery And Erection Of Vertical Turbine Motor Pump Set In Head Water Works At Bhavani Municipality.. Submission Date for this Tender is 19-01-2022. Water Supply Project Tenders in bhavani Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply and delivery of Vertical oil lubricated statically, dynamically, hydraulically balanced turbine pump capable of discharging 4000 LPM & 20mtrs Head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 (Reaffirmed 2011) and as amended thereafter to suit the site condition. The speed, Number of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 RPM. The pump includes suitable head shaft, suitable 1.5 metre long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos, 100Litre HDPE pre- lubricating tank with 20mm PVC Rigid pipe connection along with GM gate valves, suitableERW column pipe of each 1.5m long of required Nos. to suit the well depth (Pipe Suspension length of 10m)Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft 2 set and Spanner- 1setetc complete |
| 2 | Supply and delivery of vertical Hollow / Solid shaft Squirrel cage induction motor (IS 325 ) suitable for the above pump continuous rated TEFC/SPDP type with Class ‘F’ insulation for operation in AC, three Phase/50 HZ (±5%), 415V (±10%) running with a speed of pump noted above and with inbuilt thrust bearing assembly capable of taking up the entire load and non - reverse ratchet assembly etc., complete. The motor rating noted above is the minimum and shall be such that it should never be over loaded when the pump works at MWL condition and shall be 10% over and above the maximum HP absorbed by the pump. The motor offered should be energy efficient motors to have maximum efficiency at high power factor. Separate thrust bearing assembly could also be supplied to take up the down load. (22 Kw/30HP SPDP/TEFC Motor) |
| 3 | Supply and delivery of 22KW / 30 HP floor mounted type Air/ Oil Cooled Auto Transformer Startersuitable for the LT motor offered.Floor mounting type air/oil cooled Auto Transformer Starterwith taping at 50%,65%,80%, housed in robust steel chamber with arc and main contacts confirming to IS 8544 Part IV for operation in AC three Phase 50 Hz (+/-5%), 415V(+/-10%)with the following components etc. under voltage release with no volt coil, over load relay with dash pot arrangements, single phasing preventor, LED ON/OFF switches, Mounted Ammeter, Earth leakage relay, contactor assembly suitabe for next standard KW rating, in coming and out going cable entry provisions, transformer tank including first filling of oil etc., complete. |
| 4 | Supply and delivery of CI D/F 250mm Reflux Valve as per I.S 5312/2004/PART I/84PN 1.0with Bye-Pass Arrangements withISI Marking including cost and conveyence of all meterials . |
| 5 | Supply and delivery of 70 Sq.mm L.T Cable 3 Core 1.1KV Grade armoured Aluminium conductor cross linked polyethylene insulated PVC sheathed cables conforming to IS 7098 ( Part I ) /1988 with IS markingincluding cost and conveyance of all materials etc., complete. |
| 6 | Supply and delivery of 70 Sq.mm L.T Cable 3.50 Core 1.1KV Grade armoured Aluminium conductor cross linked polyethylene insulated PVC sheathed cables conforming to IS 7098 ( Part I ) /1988 with IS markingincluding cost and conveyance of all materials etc., complete. |
| 7 | Laying of 70 Sq.mm L.T Cable 3 & 3.50 Core trenches inside the pump room or in Airand all labour charges etc., complete |
| 8 | Supply and delivery of Cable gland suitable for 3 & 3.50 core 70 sq.mm UG cable including cost and conveyance of all materials etc., complete. |
| 9 | Supply and delivery of 70 sq.mm Crimping Lugs aluminium including cost and conveyance of all materials etc., complete. |
| 10 | Supply and delivery of Suitable Bolt and nut washer above 20mm including cost and conveyance of all materials etc., complete. |
| 11 | Supply and installation maintenance free GI earthing System comprising of 50mm dia and 2mtr.long earth electrode of low carban steel rod with 100 micron bonding and 25Kgs. of carbon based environment friendly backfill compound and suitable Clamp etc., completed |
| 12 | Removal of Existing Old VT pumpsets of 22 kW /30HPkW floor mounted type Air/ Oil Cooled ATS starter - 1 Set., complete and operating the pumps and as directed by Municipal officers. |
| 13 | Labour charges for erection & commissioning and testingof Vertical Turbine Pump and motor - 1 set. with discharge of 4000 LPM & 20m Headcomplete and operating the pumps andas directed by departmental officers.as per standard specification and rules in force. |
| 14 | Labour charges for fixing of 250mm Reflux including bolt nut, washer and shellac with proper grade and alignment, jointing with GI specialsand as directed by departmental offices including cost and conveyance of all materials and labour chargesetc., complete. |
| 15 | Supply delivery and Fixing of 5HP Model /rotary type Vaccum pump with Suitable Motor and starterincluding cost and conveyance of all materials and labour chargesetc., complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
