Widening Of Thana Sadar Trijunction Saharanpur Widening Of Thana Sadar Trijunction Saharanpur
Tender Value
21.88 Lakhs
Estimated cost
Bid Submission
21 Mar 2022
0 days left
EMD
2.19 Lakhs
Bank guarantee accepted
Document Fee
2860
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
saharanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Widening Of Thana Sadar Trijunction Saharanpur Widening Of Thana Sadar Trijunction Saharanpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Jan-2022 | Extention of Bid Submission Date | Date | 15-Feb-2022 |
| 2 | 15-Feb-2022 | Extention of Bid Submission Date1 | Date | 11-Mar-2022 |
| 3 | 11-Mar-2022 | Extention of Bid Submission Date 2 | Date | 21-Mar-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in cutting in ordinary soil dressing the surface to required levels and slopes and also including 1.50M lift and 30M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30M distance as directed by Engineer-in-charge.SI 253a |
| 2 | Cartage of dismentling material upto 5 km distance. SI-231(a) |
| 3 | Scrapping old painted/SDBC/BM/WBM surface upto 10cm to 40cm depth including disposal of all scrapped material to a distance of 30 meters (100ft) as directed by engineer in charge. SI-772. |
| 4 | Construction of granular sub-base by providing coarse graded material. Spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. |
| 5 | Providinglaying spereading and compacting graded stone aggregate to wet mix macadam specitfication includingpremixing the material with water at OMC in mechanical mix plant carrage of mixed material by tipper to site. Laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 6 | Providing and applying primer coat with bitumen emulsion (ss) on prepared surface ofgranular base including cleaning the road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means.(A.R. approved) |
| 7 | Provinding and laying Dense Graded Bituminous Mecadam with higher capacity batcg type HMP using crushed aggegate of specifled grading premixed with bituminious binder VG-30 @ 4.5%by waight of total mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achive the desired compaction as per morth & h specifications clauses 505 complete in all respects. |
| 8 | Providing and applying tack coat with bitumen emulsion VG-10 pressure distributor at the rate of 0.35kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.(A.R. approved) |
| 9 | Provinding and laying bituminious concrete with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggegate of specifled grading premixed with bituminious binder CRMB-55 @ 5.4%by waight of total mix and filler, transported to site, laying with hydrostatic paver fixing with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achive the desired compaction as per morth & h specifications clauses 509 complete in all respects. |
| 10 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including refectorising glass beads @ 250gms per area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC-2015 35, The finished surface to be level. Iniform and free from streaks and holes, Rates are including of all taxes. royailty, vat etc. all T &P/machine material and labour required for proper completion of work. (New item no-5/ch. 27 of signage) |
| 11 | Reflective raised pavement marker providing and fixing of raised parvement markers with twin shanks of adequate laength anchored with epoxy/bitiumen adhesive of approved make (cat Eye) type x-ASTMD-4956-04 Avery dennishion/m-3m (USA Make) having moulded body of polycarbonate ASA HIPS or Abs able ot support a load of 13.635m.t. tested in accordance with ASTMD 4280 type h and other requiedment mentioned in MORT & H circular its reflictive lens made of micro prismatic lens (capable of provding total internal reflection of linght) electronically welded to the boby. The lenght heigh and width of the body shall not excead 130mm. 20mm and 105mm reperctively. The area of each reflective surface shall not be less than 13sqcm. on each side sloping at the angle of 35+5 degree to the base to ensure maximum reflectively ti shall comply to apectification of category A of mort & H circular no. RW/NH 33023/10/97 -DD-III dated 11-06-1997 leness shall be mouled of methly methecryless conforming to ASTMD 786 or requivlent with 7 years warranty rate shall be inclusive of all taxes, royalty, vat etc. All T&P machine material and labour required of proper completion of work. S.I.NO-Signage New Item-11 |
| 12 | Providing and fixing of retro-reflectorised cautionary, mandatroy and informatory sign as per IRC :67:2012 made of high intensity grade sheeting vide clauge 801.3, fried over aluminium sheeting type IV 1.5mm thick sup-ported on a mild steel angle iron post 75mm x 75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement conc. 45cm x 45cmx 60cm, 60cm below ground level as per approved drawing The retro-reflective sheeting shall be tested for three year outdoor weatheringtest in Indian conditions as per IRC 67:2012 & proof of the same in form of goverment report shall be uploaded with quotingtender. 90cm equliateral triangle with diffiniation plate size (20X60cm) New Item No-06 |
| 13 | Providing and fixing of M.S. informatory sign board with frame of 40X40X5mm angle iron and diagonal braces of 25X5mm flat iron. 16 S.W. gauge M.S. Sheet shall be fixed on the M.S. Frame including one coat of ready mixed priming paint and two coats of apporved superior quality ready mixed paint on the whole structure and also painting letters on M.S. Sheet firmly fixed to the ground with 15 grade cement concrete 45X45X60cm B.G.L. Complete as per approved drawing and direction of Engineer-in-charge. (A.R.) |
AI Tender Summary
Tender Timeline
Mar 11, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 15, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Mar 11, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Mar 21, 2022
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender