}

Special Repair Of Bibipur Israuli Sari Link Road In Km-1, 2, 3 , barabanki-Uttar Pradesh

Public Works Department-PWD has published Special Repair Of Bibipur Israuli Sari Link Road In Km-1, 2, 3 . Submission Date for this Tender is 10-01-2022. Road Work Tenders in barabanki Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

30568437
Special Repair Of Bibipur Israuli Sari Link Road In Km-1, 2, 3
Open Tender
Indian
Uttar Pradesh
barabanki
10-01-2022

Tender Details

Special Repair Of Bibipur Israuli Sari Link Road In Km-1, 2, 3

Key Value

Document Fees
INR 2354 /-
EMD
Refer document
Tender Value
INR 44 Lakhs /-

BOQ Items

Name of Work : Special Repair of Bibipur Israuli Sari link road in km-1, 2, 3
Sl. No. Item Description
1Providing, laying, spreading and compacting stone ballast of approved quarry of specific sizes(53-22.4mm) machine broken to water bound macadam Grade-III including spreading in uniform thickness, hand packing, rolling with smoothThree wheel roller 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening Type-B of approved quarry to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per MORD specification and direction of Engineer-in-charge
2Providing and applying tack coat with Bitumen VG-10 using Bitumen Pressure Sprayer at the rate of 0.25 kg per sqm on the prepared granular surfaces treated with primer or previously painted surface & cleaned with Hydraulic broom as per MORD Technical Specification Clause 503. and direction of Engineeer in Charge .
3Providing, laying and rolling of open-graded premix carpet of 20 mm thick (compacted) composed of 13.2 mm to 5.6 mm aggregates of approved quarry using bitumen (VG-10) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant (Mixol), laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat Type C as per MORD Technical Specification Clause 508 and direction of Engineer-in-charge .
4Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per MORD Technical Specification Clause 510and direction of Engineer-in-charge .
5Construction of un-reinforced, dowel jointed, at expansion and construction joint only,plain cement concrete pavement, thickness as per design,over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade), coarse and fine aggregate conforming to IS 383,maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.20 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plats including leveling the formwork as drawing),spreading the concrete with shovels, rakes,compacted using needls, screed and plate vibrators and finshed in contunuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approadch to bridge/culvert and construction jointsadmixtures as approved, curing of concrete slabs for 14days curing compound(where specified) and water finishing to lines and grades as per drawing and Techincal specification clause 1501.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail