Repairing Of Kunda Drain Regulator At Km. 27.410 Of Ccs Jewar Tappal Tatbund In Distt. Aligarh
Tender Value
27.67 Lakhs
Estimated cost
Bid Submission
11 Jan 2022
0 days left
EMD
56000
Bank guarantee accepted
Document Fee
354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jewar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing Of Kunda Drain Regulator At Km. 27.410 Of Ccs Jewar Tappal Tatbund In Distt. Aligarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Jan-2022 | Date Corrigendum | Date | 11-Jan-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Assembleing and commissioning winch box for oprating system of a gate after cutting old bolt and damaged plate and measuring, marking, cutting by gas, making holes required in M.S plate to the size as per requirement to site,and welding by diesel generating set, including cost of CS/CI electrodes and other required materials, labour and T&P required for proper completion of work. |
| 2 | Fabricating and decking on super structure by MS chequered plate 6 mm thick after cutting old and damaged Plateform and measuring, marking, cutting by gas, making holes if required in chequered plate to the size as per requirement to site, shifting of chequered plate from ground to super structure platform and welding by diesel generating set, including cost of gas electrodes and other required materials, labour and T&P required for proper completion of work. |
| 3 | Painting of superstructure of gate by applying I coat of red oxide zinc chromate primer and 2 coat of high glass synthetic enamel phiroza blue paint of standard make after proper cleaning, scarping the surface including cost of all material, labour T&P and scaffolding bridges with proper safetyarrangement as required for proper completion of work |
| 4 | Painting on steel surface of gates & Appurtenances after preparation of surface properly and applying two coats of zinc rich primer & two coats of solvent less coaltar epoxy including cost of all labour, material, T&P, and scaffolding etc, required or proper completion of work. |
| 5 | Greasing of rollers of gate after cleaning replacing grease nipple stud/cap as including cost of all material, labour, T&P etc required for proper completion of work for a roller. |
| 6 | Replacing broken/ missing, damaged bolts nuts in hydro mechanical equipment and their components after proper checking of bolts, nuts including cost of all material, labour, T&P etc required for proper completion of work for gate. |
| 7 | Replacing of musical note type side rubber seal as per IS code 11855 by removing old damaged side rubber seal from gate, scraping & cleaning surface, making holes feding and clamping the M.S plate by new counters sunk head high tensile bolts, nuts and washer, making adjustment as per requirement of site including cost of all material labour and T&p required for proper completion of work.For size 120 X 12mm note dia 45mm |
| 8 | Replacing of bottom rubber seal as per IS code 11855 by removing old damaged side rubber sea from gate, scraping & cleaning surface, making holes, fixing and clamping the M.S plate by new counters sunk head high tensile bolts, nuts and washer, making adjustment as per requirement of site including cost of all material, labour and T&p required for proper completion of work. |
| 9 | Replacing Steel wire rope and their components after proper checking of bolts, nuts including cost of all material, labour, T&P etc required for proper completion of work for gate. |
| 10 | Fabricating/Repairing of railing of including cutting, welding, cost of all material, labour, T&P etc required for proper completion of work per meter including two anglein a meter of railing. |
| 11 | Supplying and fixing of jalii/c all taxes, fabrication, painting, labour, material, T&P etc. complete. |
| 12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 13 | Greasing oiling of component of lifting mechanism of gates (excluding rollers) after proper cleaning with replacing Grease cup/Grease Nipple as required including cost of all material, labour and T&P etc. required proper completion of work. |
| 14 | Applying cardium compound on steel wire rope, teeth of drum gear and pinion of gate after proper cleaning including cot of all materail, labour, T&P and scaffolding with safety arrangement required for proper completion of work. |
| 15 | Finishing with Deluxe Multi surface paint system for exteriors using Primer as per manufacturers specifications including cot of all materail, labour, T&P and scaffolding with safety arrangement required for proper completion of work |
AI Tender Summary
Tender Timeline
Jan 09, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 11, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender