Supply Of Furniture For Department Of Biotechnology At Cdlu, Sirsa. Supply Of Furniture For Department Of Biotechnology At Cdlu, Sirsa. , Ns ) Supply Of Powder Coated Extruded Aluminium Sections System Desk Band System Modular Work Stations ( 6 Seat

Sharing tender

Supply Of Furniture For Department Of Biotechnology At Cdlu, Sirsa. Supply Of Furniture For Department Of Biotechnology At Cdlu, Sirsa. , Ns ) Supply Of Powder Coated Extruded Aluminium Sections System Desk Band System Modular Work Stations ( 6 Seat Per Unit ) :- Dimensions ( In Mm ) : Table Top ( 1200Mm X 600Mm X 25Mm ) Partition Around 45 To 60 Mm Between Two Opposite Seats. Wire Management For Power And Lan Switches: Available At Table Top. Drawer Storage Unit For Cpu And Keyboard Tray. Table Top And Aisle Side Panels Should Be Pre-Laminated Particle Board With Pvc Edge Banding In Good Modesty. Finish: Powder Coating Of Overall Frame Including Under Structures For Long Life.Installation Commissioning Etc Complete In All Respect. Frame Work:- Aluminium Section 45Mm X 45Mm X 2Mm. Height Leveller :- Ms Rod With Rubber Shoe.Tile / Panels :- 9Mm Thick With Following Finish:A ) Pre Laminated Particle Board. B ) Pre Laminated Medium Density Fibre Board. C ) Pin Up Board. D ) White Board. E ) Magnetic Board. F ) Glass Boardg ) Work Top In 25Mm Thickness With Post Formed / Edge Bending. H ) Key Board In Metal. I ) Cpu Trolley In Metal With Castor Fitted. Drawer Unit :- Shall Be Made Up Of 18 Mm Thick Pre-Laminated Particle Boardusing Pvc Edge Banded Tape On All Exposed Edges With Edge Banding Machine Using Hot Melt Glue At 200 * C Temperature Fascia Of Drawers Units Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Using Pvc Edge Banded Tape On All Exposed Edges With Edge Banding Machine Using Hot Melt Glue At 200 * C Temperature . Each Drawer Shall Have Front Handles & Locking Arrangement. Drawers Shall Run On Metallic Channels With Nylon Rollers Fro Feather Touch Movement. Shape Shall Be As Per Sketch Added. , Ns ) Supply Of Computer Chair :- The Seat And Back Shall Be Made Up Of 1.2 +- 0.1 Cm Thick Hot Pressed Plywood And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Shall Be Designed With Contoured Lumber Support For Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. The Dimensions Of Back Shall Be 47.5Cm ( W ) X 58. 0Cm ( H ) And Of Seal Shall Be 47.0 Cm ( W ) X 48. 0 Cm ( D ) . The Hr Polyurethane Foam Shall Be Moulded With Density = 45 +-2 Kg / Cm3 And Hardness Load 16 +-2 Kgf As Per Is:7888 For 25% Compression. The One -Piece Armrests Shall Be Injection Moulded From Black Co Polymer Polypropylene. The Mechanism Shall Be Designed With 360 Degree Revolving Type, Upright Position Locking, Tilt Tension Adjustment, Seat / Back Tilting Ratio Of 1:3. The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 12.0 +-0.3. The Pneumatic Height Adjustment Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Injection Moulded In Black 33%. The Seat And Back Will Be Covered By Black Polypropylene Cover. Glass Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. Teh Pedestal Shall Be 66.3 +-0.5 Cm Pitch Center Dia ( 76.3 +-1.0 Cm With Castors ) . The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 42.5 To Max 54.5 Cm, Height- 85.5 To Max97.5 Cm, Width & Depth Of Chair As Measured From Pedestal-Width-76.3 Cm And Depth 76.3 Cm. Shape Shall Be As Per Sketch Added. , Ns ) Supply Of Lab Table Having Following Specifications: Lab Table Having Fixed Storage I.E. Combination Of Drawer And Shutter Storage Plus Sink Cabinet, Power Sockets, Eye Wash And Water Outlet Accessories Etc. Under Bench Storage With Drawer And Shutter Made Of 1 Mm Thick Powder Coated Ms Sheet, 3 Way Water Flow Of Best Quality, Main Under Structure Ms Crc Sq. Pipe 40X40x1.6 Mm Powder Coated, Pre-Polished 16 To 18 Mm Granite Finished At Top, Back, Side, Cover, Filter Panel Made Of Crca Ms 1 Mm Thick Powder Coated, Sink Made Of 5 Mm Thick High Density And Elastic Polypropylene With Good Resistance To Organic Solvents. Depth Of Table 750 Mm Height Of Table 900 Mm. Overhead Storage 600 Mm ( H ) X 300Mm ( D ) Made Of Mdf Board. Shape Shall Be As Per Sketch Added. , Ns ) Supply Of Revolving Lab Stool. The Height Of Stool 600Mm, Dia. Of Seat 300 Mm. The Stool Should Have Minimum 5 Wheels Base, Top & Under Structure Material Made Of Stainless Steel 202 G Thickness 0.9Mm. The Height Of Stool Is Adjustable With Hydraulic System. Thickness Of Seat Shall Be 40Mm. Shape Shall Be As Per Sketch Added.