Military Engineer Services-MES has published Repair To Flooring, Plastering, Ceiling Joinery And Certain Maint Work For B R Nature Under Age B / R-I At Ge Jhansi. Submission Date for this Tender is 20-01-2022. Civil Work Tenders in jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Jan-2022 | Include Drawings | Technical Bid | 20-01-2022 |
| 2 | 07-Jan-2022 | Amdt BOQ | BOQ | 20-01-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 2 | Demolition of RCC not exceeding 15cm thickness in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab and similar suspended work, complete all as specified and directed. |
| 3 | M&L for semi skid ceramic color tiles of size area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 4 | M&L for ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed. |
| 5 | M&L flor Jointless Non-skid cermaic tiles 7 to 8mm thick (squre/rectanglar) are of each tiles exceeding 0.18 sqm but notexceeding 0.38 sqm, in each floors etc, set and jointed in neat cement slurryover 15mm thick screed bed in CM 1:6. includingspacerandfilling material complete all as specified and directed. |
| 6 | M&L for vitrified tiles of size exceeding 0.18 sqm but note xceeding 0.38 sqm, 10mm thick of granite series as in floor set and jointed of tilelaid over includingspacer andfilling material and 20mm thick screed bed layer in CM (1:4) complete all as specified and directed. |
| 7 | M&L Machine cut kota stone slab flooring 20-25 mm thick over 15 mm thich cement screed bed in CM 1.6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete all as specified and as directed. |
| 8 | M&L kota stone slab 20-25 mm thick in riser of steps, skirting dado and piller laid over cement screed and jointed complete all as specified and as directed. |
| 9 | M&L for chequered cement concrete tiles 300mmx300mmx25mm thick, machine pressed (rubber mould type) confirming to IS 13801 ; set jointed and pointed in neat cement slurry in floors laid on 15mm thick in CM (1:6) beddinglayersand jointed & pointed with grey cement and no pigment complete all as specified and directed. |
| 10 | M&L for 25mm thich PCC type B0 1:2:4(using 12.5mm graded aggregate) as in levelling course complete all as specified and as directed. |
| 11 | M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, duly ISI marked with labelling of manufacture, with and including 50mm thick sand cushioning, complete all as specified and directed. Note : The cost of sand cushion is deemed to be inclusive in quoted rate. |
| 12 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks WHITE COLOURTRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve (Make: paryag) complete all as specified in SSR Part I including disconnectiong and dismantling of existing tank complete all as specified and as directed. |
| 13 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks WHITE COLOURTRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve (Make: paryag) complete all as specified in SSR Part I including disconnectiong and dismantling of existing tank complete all as specified and as directed. |
| 14 | S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 15 | Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed. |
| 16 | M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on planexc 6m mean radius built in cm (1:6), complete all as specified and directed. |
| 17 | M&L for half brick thick wall with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:4, complete all as specified and directed. |
| 18 | Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 19 | M&L for 15 mm thick rendering in CM (1:4)on fair/other than fairfaces of brick work finished even and fair complete all as specified and directed. |
| 20 | M&L for 15 mm thick rendering in CM (1:6)on fair/other than fairfaces of brick work finished even and fair complete all as specified and directed. |
| 21 | M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 24 | M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of ceiling, complete all as specified and as directed. |
| 25 | M&L for preparation of old plastered surface and applying two coat of cement based paint , complete all as specified and directed. |
| 26 | M&L for preparation of old plastered surface and applying one coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 27 | M&L for preparation of surface by washing, rubbingdown and stopping ofpainted surfaces of walls and applying one coat of white wash (lime) on walls surface, complete all as specified and directed. |
| 28 | M&L for preparation of surface by washing, rubbingdown and stopping of distempered and painted surfaces of ceiling and applying two coat of white wash (lime) on walls surface, complete all as specified and directed. |
| 29 | M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings. |
| 30 | Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed. |
| 31 | S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-paintednon asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed. Make : Gyproc/V-Board/Everest. |
| 32 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 33 | S&F of 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as specified and as directed. |
| 34 | S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as specified and as directed. |
| 35 | S&F in replacement of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed. |
| 36 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as specified and as directed. |
| 37 | All as per item here-in-above but not exc 1.5 sqm each complete all as specified and as directed. |
| 38 | Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed. |
| 39 | Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed. |
| 40 | S&F 25mm thick flush shutter for cup board solid core construction with block board core and plywood face panels commercial type on both sides etc with and incl min 5 mm thick wooden beading fixed all around complete all as directed. |
| 41 | S&F 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work, complete all as specified and directed. |
| 42 | S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed. |
| 43 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and suppling & fixing in the frame at site, complete all as specified and directed. |
| 44 | S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick Wooden texture moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site, complete all as specified and directed. |
| 45 | S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood colouredPVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page no - 175), complete all as directed. |
| 46 | S&F of 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed. |
| 47 | S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21anodized complete all specified and directed |
| 48 | S&F of 75mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed. |
| 49 | S&F of 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws, complete all as specified and directed. |
| 50 | S&F of 150mm long mild steel pressed handles, oval type, stove enamelled black and fixed withscrews, complete all as specified and directed. |
| 51 | S&F of 200mm long mild steel, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed. |
| 52 | S&F of aluminium alloy anodized sliding door bolt 200mm length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all specified and directed. |
| 53 | S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. |
| 54 | S&F of 100mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. |
| 55 | S&F of 150mm aluminum handle cast type anodized complete all specified and directed. |
| 56 | S&F of 100mm aluminum handle cast type anodized complete all specified and directed. |
| 57 | S&F of meld steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed |
| 58 | S&F of 140 mm door stopper of aluminium body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 59 | M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed. |
| 60 | M&L for stainless steel rod 15mm dia steel pipe cutting into length as required at site with and incl SS end brackets, fixed in cupboard and similar works, complete all as specified and directed. |
| 61 | M&L for box type steel window with 80x40x1.25 m MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing barsdoweled and welded complete all as specified as directed. Note:-(a)The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick. |
| 62 | M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:-(a)The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick. |
| 63 | S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed. |
| 64 | M&L for second class hard wood. Plain, solid, straight chowkhats and frame, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixing, complete all as specified and directed. |
| 65 | M&L for 30mm thick second class hard woodglazed & skeleton shutter for doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted without & mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section–8, clause 8.24(b) and conforming to IS-1003 Part-I & II, complete all as specified and as directed. |
| 66 | M&L for 30mm thick second class hard wood, glazed and skeleton shutter for window & ventilators, (fully glazed), minimum two panels divided into squares (without sash bars) and prepared to receive glass, gauge etc edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part- I section -8, clause 8.24(a),and fitted to chowkhats, complete all as specified and directed. |
| 67 | M&L for mild steel hold fast and similar small articles conforming to Fe-290 Gde-165, complete all as specified and directed. |
| 68 | M&L for cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) for bed block for fixing of chowkhats, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
