Power Government Departments Closing in 0 days TDR #30547444

Business Plan Works Different Sites In The Area Of Edsd Iii Bhola Under Edd Iii Meerut- Cartage Of Following Material From Store Center Meerut To Je Store Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :- 2 St Pole 11 Mtr. Long

Issued by Government Departments · , Uttar Pradesh
Tender Value
5 Lakhs
Estimated cost
Bid Submission
07 Jan 2022
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
→ Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Business Plan Works Different Sites In The Area Of Edsd Iii Bhola Under Edd Iii Meerut- Cartage Of Following Material From Store Center Meerut To Je Store Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :- 2 St Pole 11 Mtr. Long. / Pcc Pole 8.5 Mtr Long 3 Line Material Such As 11 Kv Cross Arms 11 Kv Pin, 11 Kv Pin Insulator, 11 Kv Disc, Stay Rod, Stay Wire Acsr Weasel Conductor, Gi Wire, Ms Angle Iron & Ms Channel, Tpmo, Fuse Set Etc. 4 Acsr Weasel Conductor 5 Lt Pvc Cable All Sizes 6 250 Kva Transformer 7 25 Kva To 100 Kva Transformer 8 Cartage Of Following Material From Je, Store To Site Of Work Including Loading & Unloading At Both Ends Maximum Distance Up To 15 Km. :- 9 St Pole 11 Mtr. Long. / Pcc Pole 8.5 Mtr Long 10 Line Material Such As 11 Kv Cross Arms 11 Kv Pin, 11 Kv Pin Insulator, 11 Kv Disc, Stay Rod, Stay Wire Acsr Weasel Conductor, Gi Wire, Ms Angle Iron & Ms Channel, Tpmo, Fuse Set Etc. 11 Acsr Weasel Conductor 12 Lt Pvc Cable All Sizes 13 250 Kva Transformer 14 25 Kva To 100 Kva Transformer 15 Erection Of Stp Pole 11 Mtr Long After Digging A Pit Of Size 1.20 X 0.60 X 1.6 Mtr In All Type Of Soil Including Back Filling Of The Pole With Proper Ramming After Completion Of Work. 16 Fabrication And Fixing Of All 11 Kv Ht Line Accessories. 17 Erection Of Double Pole On Stp11 Mtr After Digging A Pitt Of Size 1.20 X 0.60 X 1.6 Mtr In All Type Of Soil For Each Pole Including Back Filling Of The Pole With Proper Ramming After Completion Of Work. 18 Fixing Of 11 Kv Tpmo With On Existing On Double Pole 19 Fixing Of 11 Kv Fuse Set With On Existing On Double Pole 20 Fabrication And Fixing Of Ms Angle And Ms Channel, Fixing All 11 Kv Accessories Tpmo, Fuse Set 11 Kv Pin Insulators. 21 Opening And Binding St Jumper 100 Kva And 25 Kva And 63 Kva T / F After Dismental 22 Mounting Of 25 To 100 Kva T / F With Proper Jumping Of Ht Side And Fixing Of Cable On Lt Side Of T / F. 23 Earthingh Of Each 11 Kv Line Pople & T / F Properly After Drive Of Electrodes If Size 20Mm X 250 Mm And Connection The Earthing Point With Gl Wire. 24 Mounting Of Plinth 250 Kva Transformer Grouting Of Stp Pole With Bb Concreeting In Block Of Size 0.45X0.45X1.6 Mtr In Reso Of 1:4:8 Of Cement Send And Brick Ballast 25 Construction Of 250 Kva Transformer Foundation Of Plinth. 26 Frp Fencing For 250 Kva Transformer And Grouting Plinth And Fencing Etc. Work. 27 Water Level Earthing With Gi Pipe 32 Mm Dia And Ms Flat Of Size 45X5mm 28 Making A Section Pole To Exist Pole After Fabrication & Fixing Of T Channel Fixing Of All 11 Kv Accessories. 29 Erection Of Stay Rod Complete After Digging A Pit Of Size 1.20 X0.60 X 1.6 Mtr And Grouting The Same In Block Of Size 0.60 X 0.60 X 0.30 Mtr And Nuzzling At The Both Ends And Filling The Pit With Excavated Earth Soil With Proper Ramming. 30 Cutting & Chopping Tree Branches Near Side Of Line For Making The Clearance Between Line And Tree. 31 Fixing And Lifting Of Lt Distribution Box 3 Ph. Single Phase Lt Line 32 Pvc Lead And Joint The Connection Of Lt Distribution Box 33 Providing And Fixing Stay Clamps. 34 Providing And Fixing Holding Clamps. 35 Providing And Fixing F Clamps. 36 Providing And Fixing Bolt And Nuts. 37 Dissmentling Of 25 Kva To 100 Kva Transformer Old And Use ( Scrap ) In Je, Store

BOQ

Name of Work:fo|qr forj.k [k.M r`rh;] esjB ds vUrxZr iz.kkyh lq/kkj ;kstuk ¼fctusl Iyku 2021&22½ esa mi[k.M vf/kdkjh r`rh;] Hkksyk ds dk;Z {ks= esa 33@11 dsoh fo|qr midsUnz iwB] djukoy] f[kokbZ] dSFkokMh] Hkksyk ,oa jksgVk esa LFkkfir ifjorZdks dh {kerko`f) djuk ,oa vU; lEcfU/kr dk;ZA
Sl. No. Item Description
1Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :-
2ST Pole 11 Mtr. Long./PCC Pole 8.5 Mtr Long
3Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel, TPMO, Fuse set etc.
4ACSR Weasel Conductor
5LT PVC Cable all sizes
6250 KVA Transformer
725 KVA to 100 KVA Transformer
8Cartage of following material from JE, Store to site of work including loading & unloading at both ends maximum distance up to 15 Km. :-
9ST Pole 11 Mtr. Long./PCC Pole 8.5 Mtr Long
10Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel, TPMO, Fuse set etc.
11ACSR Weasel Conductor
12LT PVC Cable all sizes
13250 KVA Transformer
1425 KVA to 100 KVA Transformer
15Erection of STP Pole 11 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil including back filling of the pole with proper ramming after completion of work.
16Fabrication and fixing of all 11 KV HT line accessories.
17Erection of Double pole on STP11 Mtr after digging a pitt of size 1.20 x 0.60 x 1.6 mtr in all type of Soil for each pole including back filling of the pole with proper ramming after completion of work.
18Fixing of 11 KV TPMO with on existing on double pole
19Fixing of 11 KV fuse set with on existing on double pole
20Fabrication and fixing of MS angle and MS channel, fixing all 11 KV accessories TPMO, Fuse set 11 KV pin insulators.
21Opening and binding ST jumper 100 KVA and 25 KVA and 63 KVA T/F after dismental
22Mounting of 25 to 100 KVA T/F with proper jumping of HT side and fixing of cable on LT side of T/F.
23Earthingh of each 11 KV line pople & T/F properly after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GL wire.
24Mounting of Plinth 250 KVA Transformer Grouting of STP Pole with BB Concreeting in block of size 0.45x0.45x1.6 mtr in reso of 1:4:8 of cement send and brick ballast
25Construction of 250 KVA Transformer foundation of Plinth.
26FRP Fencing for 250 KVA Transformer and grouting plinth and fencing etc. work.
27Water level earthing with GI Pipe 32 mm Dia and MS Flat of size 45x5mm
28Making a section pole to exist pole after fabrication & fixing of T channel fixing of all 11 KV accessories.
29Erection of stay rod complete after digging a pit of size 1.20 x0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.
30Cutting & chopping tree branches near side of line for making the clearance between line and tree.
31Fixing and lifting of LT Distribution Box 3 ph. Single Phase LT Line
32PVC Lead and joint the connection of LT Distribution Box
33providing and fixing stay clamps.
34Providing and fixing Holding clamps.
35Providing and fixing F clamps.
36Providing and fixing Bolt and Nuts.
37Dissmentling of 25 KVA to 100 KVA Transformer Old and use(Scrap) in JE, Store

AI Tender Summary

OUR REF NO 30547444
AUTHORITY Government Departments
TENDER VALUE 5 Lakhs
LAST DATE 07-01-2022
Authority
Authority Name Paschimanchal Vidyut Vitran Nigam Limited
Work Description Business Plan Works Different Sites In The Area Of Edsd Iii Bhola Under Edd Iii Meerut- Cartage Of Following Material From Store Center Meerut To Je Store Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :- 2 St Pole 11 Mtr. Long. / Pcc Pole 8.5 Mtr Long 3 Line Material Such As 11 Kv Cross Arms 11 Kv Pin, 11 Kv Pin Insulator, 11 Kv Disc, Stay Rod, Stay Wire Acsr Weasel Conductor, Gi Wire, Ms Angle Iron & Ms Channel, Tpmo, Fuse Set Etc. 4 Acsr Weasel Conductor 5 Lt Pvc Cable All Sizes 6 250 Kva Transformer 7 25 Kva To 100 Kva Transformer 8 Cartage Of Following Material From Je, Store To Site Of Work Including Loading & Unloading At Both Ends Maximum Distance Up To 15 Km. :- 9 St Pole 11 Mtr. Long. / Pcc Pole 8.5 Mtr Long 10 Line Material Such As 11 Kv Cross Arms 11 Kv Pin, 11 Kv Pin Insulator, 11 Kv Disc, Stay Rod, Stay Wire Acsr Weasel Conductor, Gi Wire, Ms Angle Iron & Ms Channel, Tpmo, Fuse Set Etc. 11 Acsr Weasel Conductor 12 Lt Pvc Cable All Sizes 13 250 Kva Transformer 14 25 Kva To 100 Kva Transformer 15 Erection Of Stp Pole 11 Mtr Long After Digging A Pit Of Size 1.20 X 0.60 X 1.6 Mtr In All Type Of Soil Including Back Filling Of The Pole With Proper Ramming After Completion Of Work. 16 Fabrication And Fixing Of All 11 Kv Ht Line Accessories. 17 Erection Of Double Pole On Stp11 Mtr After Digging A Pitt Of Size 1.20 X 0.60 X 1.6 Mtr In All Type Of Soil For Each Pole Including Back Filling Of The Pole With Proper Ramming After Completion Of Work. 18 Fixing Of 11 Kv Tpmo With On Existing On Double Pole 19 Fixing Of 11 Kv Fuse Set With On Existing On Double Pole 20 Fabrication And Fixing Of Ms Angle And Ms Channel, Fixing All 11 Kv Accessories Tpmo, Fuse Set 11 Kv Pin Insulators. 21 Opening And Binding St Jumper 100 Kva And 25 Kva And 63 Kva T / F After Dismental 22 Mounting Of 25 To 100 Kva T / F With Proper Jumping Of Ht Side And Fixing Of Cable On Lt Side Of T / F. 23 Earthingh Of Each 11 Kv Line Pople & T / F Properly After Drive Of Electrodes If Size 20Mm X 250 Mm And Connection The Earthing Point With Gl Wire. 24 Mounting Of Plinth 250 Kva Transformer Grouting Of Stp Pole With Bb Concreeting In Block Of Size 0.45X0.45X1.6 Mtr In Reso Of 1:4:8 Of Cement Send And Brick Ballast 25 Construction Of 250 Kva Transformer Foundation Of Plinth. 26 Frp Fencing For 250 Kva Transformer And Grouting Plinth And Fencing Etc. Work. 27 Water Level Earthing With Gi Pipe 32 Mm Dia And Ms Flat Of Size 45X5mm 28 Making A Section Pole To Exist Pole After Fabrication & Fixing Of T Channel Fixing Of All 11 Kv Accessories. 29 Erection Of Stay Rod Complete After Digging A Pit Of Size 1.20 X0.60 X 1.6 Mtr And Grouting The Same In Block Of Size 0.60 X 0.60 X 0.30 Mtr And Nuzzling At The Both Ends And Filling The Pit With Excavated Earth Soil With Proper Ramming. 30 Cutting & Chopping Tree Branches Near Side Of Line For Making The Clearance Between Line And Tree. 31 Fixing And Lifting Of Lt Distribution Box 3 Ph. Single Phase Lt Line 32 Pvc Lead And Joint The Connection Of Lt Distribution Box 33 Providing And Fixing Stay Clamps. 34 Providing And Fixing Holding Clamps. 35 Providing And Fixing F Clamps. 36 Providing And Fixing Bolt And Nuts. 37 Dissmentling Of 25 Kva To 100 Kva Transformer Old And Use ( Scrap ) In Je, Store
Basic Detail
Tender No 129/EDC-MT/2021-22
Bidding Type Tender
Location
City
State Uttar Pradesh
Key Dates
Publish Date 01 Jan 2022
Submission Date 07 Jan 2022
Open Date 07 Jan 2022
Finance
Tender Value 5 Lakhs
Tender Fee 1180
EMD 5000
Exemption Not Available
Document List
3c0f568a-0656-4bfa-bf92-e7691e63299e.html
BOQ_1065287.xls
TenderForms129.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 01, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 07, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 07, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

3c0f568a-0656-4bfa-bf92-e7691e63299e.html

xls

BOQ_1065287.xls

pdf

TenderForms129.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender