Repair Maintenance Of Hostel Roof, Floors, Water Taps And Overhead Tanks With Tap Water Facility In Toilet And Bathrooms At New General Hostel Mv-79 Girls High School
Tender Value
4.76 Lakhs
Estimated cost
Bid Submission
15 Jan 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
malkangiri → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Maintenance Of Hostel Roof, Floors, Water Taps And Overhead Tanks With Tap Water Facility In Toilet And Bathrooms At New General Hostel Mv-79 Girls High School
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing 2.5 cm. thick artificial stone flooring including stacking of useful materials and removing the debris away from the work site including cost of labour and equipment requirred for the work complete in all respect as directed by the Engineer -in -charge . |
| 2 | Dismentaling & Removing old lime or cement plaster from the walls including raking out joints 12 mm deep and removing the debris away from the work site inclding cost of labour and equipment required for the work complete in all respect as directed by the Engineer-in-charge. |
| 3 | Dismentaling & Removing old tile flooring including removing the base couse for reuse and removing the debris away from site within 50m. lead including cost of labour and equipment required for the work complete in all respect as directed by the Engineer-in-charge. |
| 4 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris with50m lead etc. Completed as Directed by the Engineer-in-charge. |
| 5 | Providing and laying coarse sand in foundation and plinth filling with Sand in 9\" thick layers of approved quality free from dust, dirt and other foreign materials to proper line and grade, watering and ramming etc. complete with all lead, lifts de-lifts including labour charges with cost, conveyance tax and royality of all material, labour, T&P and other incidental charges etc. complete as per direction of Engineer-in-charge |
| 6 | Cement concrete in proportion (1:4:8) in foundation and floors using 4 cm size (3/2\") clean hard black crusher broken granite metal free from skin & weather skin of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15 cm (6\")thick to the required level, ramming, compacting to proper thickness, watering and curing etc. complete with cost conveyance, royalty and all taxes of materials,cost of labour, T &P and machineries etc. completed with all lead lift and delift including centering & shuttering if necessary,in all respect to the specification and as directed by the Engineer-in-charge. |
| 7 | Cement concrete (1:2:4) with clean hard broken granite chips of 12mm to 20mm size of approved quality and from approved quarry, with centering and shuttering including hoisting , laying, lowering in layers not exceeding 150mm thick to the required level and finishing the exposed surface smooth , providing grooves and beads , watering and curing for three weeks including all labour supplying and working of pumps , T & P and hire and running charges of machineries required for the work etc. completed with cost, conveyance, royalty and taxes of all materials as per thespecification and direction of the Engineer-in-charge. a) Ground Floor |
| 8 | b) 1st Floor |
| 9 | 2.5 cm (1\")thick grading concrete over roof slab in Cement Concrete (1:2:2)6mm (1/4\") size clean hard black crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying in layers ramming watering and curing etc. complete including all cost, conveyance, taxes and royalities of material and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 10 | b) 1st Floor |
| 11 | Supplying, fitting & fixing of M.S Door, Window, Ventilator and Grill Gate made up all round angular frame size 35 x 35 x 5 mm , Door and Window angular frame size 25 x 25 x 3/5 mm with 20 gage C.R. Sheet supporting flat size 25 x 8 mm and 18 x 5 mm including fitting of clamp, hinges, tower Blot, aidrops including all cost conveyance tax of materials and labour with T & P required for the work etc. complete. a ) Doors & FG |
| 12 | b) Window |
| 13 | Fixing vitrified tiles in floor, steps, treads and landing on 25 cm thick of C.M. (1:1) jointed with neat cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete including cost, conveyance of precaste tile with all labour T&P taxes etc. complete as per direction of the E.I.C.a) Ground Floor |
| 14 | b) 1st Floor |
| 15 | Fixing Vitrified tiles in dados, skirting and risers of steps on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles with rubbing and polishing complete including cost, conveyance of pre cast tile with all labour T&P, taxes etc. a) Ground Floor |
| 16 | b) 1st Floor |
| 17 | Fixing Ceramic tiles in floor, steps, treads and landing on 25 cm thick of C.M. (1:1) jointed with neat cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete including cost, conveyance of precaste tile with all labour T&P taxes etc. complete as per direction of the E.I.C. |
| 18 | b) 1st Floor |
| 19 | Fixing Ceramic tiles in dados, skirting and risers of steps on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles with rubbing and polishing complete including cost, conveyance of pre cast tile with all labour T&P, taxes etc. a) Ground Floor |
| 20 | b) 1st Floor |
| 21 | Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25Kg/Sqm and 1.5mm thickness consisting of layers having center core of 20 micros thermophsible high molecular high densing polythyne CH.M.H.D. P.E. filing of grade 250m including priming the surfae with bitumineous primer @ 0.3 Kg/Sqm providing a coat of hot blown bitumen of 1.32 kg / Sqm, applying and laying plastic felt membrane with ...... adheved to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2Kg/Sqm etc complete. |
| 22 | WATER SUPPLY AND SANITARY WORKEarth work in hard soil or gravelly soil in embankment, roads etc. within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per specification approved by the Department alongwith proper compaction with P.R.R. including hire and running charges of P.R.R as directed by the E.I.C. |
| 23 | Filling in foundation and plinth with sand, well watered and rammed to 9\" thick layers with all leads and lifts, cost, conveyance & royalty and all taxes of materials, cost of labour, T & P required for the work etc. complete in all respect as directed by the E.I.C. |
| 24 | Supply, fitting, fixing of suitable dia HDPE pipes of 10 kg/ cm2 pressure rating conforming to relevant ISS specification withISI mark suitable for above pump set etc. completed as per direction of the E.I.C.a) 25 mm (1\") dia HDPE pipes |
| 25 | b)40 mm (1.5\") dia HDPE pipes |
| 26 | Providing & fixing to wall or ceiling and floor PVC pipes class confirming to ASTM-D-1785/89 (sch-80) and pipe fittings of the following nominal dia with clamps including making good the wall, ceiling and floor all complete as per specification complete ( excluding cost of earth work i trenches)a) 25 mm (1\") dia PVC pipe |
| 27 | b) 20mm (3/4\" ) dia PVC pipe |
| 28 | c) 15mm(1/2\" ) dia PVC pipe |
| 29 | Supplying all materials,labour with T&P and fixing of O.D. PVC pipes(6kg/sqcm) and fittings to walls with nails,bobbins and wooden plugs etc completed as per PH specification.a) 110mm dia PVC pipe |
| 30 | b) 90mm dia PVC pipe |
| 31 | c) 75mm dia PVC pipe |
| 32 | Supplying all materials,labour with T&P and fixing of following PVC fittings etc completed as per PH specification.(For use in septic Tank & soak pit) [Data for 10.00 mtr]a) 75 mm Door Tee |
| 33 | b) 75 mm Door Bend(87.5°) |
| 34 | c) 75 mm PlainBend(87.5°) |
| 35 | d) 75 mm Bend(45 degree) |
| 36 | e) 75 mm PlainTee |
| 37 | f) 75 mm Cowl |
| 38 | g) 75 mm Noni Trap with jally |
| 39 | h) 75 mm Coupler/Socket |
| 40 | i) 110mm Door Tee |
| 41 | j) 110mm Door Bend(87.5°) |
| 42 | k) 110mm PlainBend(87.5°) |
| 43 | l) 110mm Bend(45 degree) |
| 44 | m) 110mm PlainTee |
| 45 | n) 110mm Cowl |
| 46 | o) 110mm Noni Trap with jally |
| 47 | p) 110mm Coupler/Socket |
| 48 | q) PVC P-Trap |
| 49 | Supplying all materials,labour with T&P forfixing of Water Closet(Indian Type) duly embedded in cement concrete(1:3:6) using 12mm size CBHG chips excluding cost of P-trap & other fittings & including cost of orissa pan etc complete as per PH specification. |
| 50 | Supplying all materials,labour with T&P forfixing of Wash Down Water Closet(European Type) with integral \"\"S\"\" or \"\"P\"\" trap to the floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar(1:1) etc complete as per PH specification. |
| 51 | Supplying all materials,labour with T&P forfixing 10 Ltr. Capacity Low level Flushing Cistern with a pair of Cast Iron or MS Bhe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar(1:1) etc complete as per PH specification. |
| 52 | Supplying all materials,labour and T&P for fixing Flat back standing urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc complete as per PH specification. |
| 53 | Supplying all materials,labour and T&P for fixing of Wash Hand Basin with hole of pillar cock with C.I./M.S. Bracket painted white including cutting holes in walls and making good to the damages etc complete as per PH specification. |
| 54 | Supplying of all materials , labour and T&P for fixing of Brass screw-down Bib Cocks/Push Cocks(Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per PH specification.a) 15mm dia Brass Screw-down Bib Cock |
| 55 | b) 20mm dia Brass Screw-down Bib Cock |
| 56 | Supplying of all materials , labour and T&P forfixingBrassscrew-down Stop Cock of the following sizes as per PH specification.a) 15mm dia Brass Screw-down Stop Cock |
| 57 | b) 20mm dia Brass Screw-down Bib Cock |
| 58 | Supplying of all materials , labour and T&P for fixing of CPBib Cocks/Push Cocks(Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per PH specification.a) 15mm dia CPBib Cock(Short Body) |
| 59 | b) 15mm dia CPBib Cock(Long Body) |
| 60 | Supplying of all materials , labour and T&P for fixing of PT MT(Poly Tetra Methylene Terephthalate) Bib Cocks(Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per PH specification.a)15mm dia Bib Cock(Short Body) |
| 61 | b) 15mm dia Bib Cock(Long Body) |
| 62 | c) 20mm dia StandardBib Cock |
| 63 | Supplying of all materials , labour and T&P forfixingBrass / Gun Metal Full Way Valve of the following sizes as per PH specification.a) 20mm dia Brass or Gun Metal Full Way Valve |
| 64 | b) 25mm dia Brass or Gun Metal Full Way Valve |
| 65 | c) 32mm dia Brass or Gun Metal Full Way Valve |
| 66 | Supplying of all materials ,labourand T&P forfixingBrass Ball Valve of the following sizes as per PH specification.a) 20mm dia Brass Ball Valve |
| 67 | b) 25mm dia Brass Ball Valve |
| 68 | c) 32mm dia Brass Ball Valve |
| 69 | Supplying of all materials ,labour and T&P for fixing of Double Layer PVC Water Storage Tank including cutting holes through the tank and fixing of G.I. Pipes and fittings and providing extra socket,jam nut,fixing Ball Valves etc including hoisting upto a height of 5.00 mtr above ground level and placing the tank to the required position all complete as per specification and direction of Engineer-in-charge.a) 1000 ltr capacity PVC water tank |
| 70 | b) 500 Ltr. Capacity PVC water tank |
| 71 | Cutting holes through the brick or laterite masonry wall for taking Sand Cast Iron(SCI)/centrifugally cast(spun) iron pipes and making good to the damages.a) 250mm to 375mm thick wall |
| 72 | b) 375mm to 500mm thick wall |
| 73 | Cutting grooves in pucca floors and wallsfor taking GI/PVC pipes and making good to the damages.(Data for 30.00 mtr) |
AI Tender Summary
Tender Timeline
Jan 01, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender