Laying Pipeline To Carry Water From Somb River Near Gau Shala To Sarasvati Sarovar At Adi Badri.
Tender Value
6.41 Lakhs
Estimated cost
Bid Submission
06 Jan 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
→ Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Laying Pipeline To Carry Water From Somb River Near Gau Shala To Sarasvati Sarovar At Adi Badri.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling dressed stone work ashlar face stone work, marblework or precast concrete work manually/ by mechanical meansincluding stacking of serviceable and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-inmaterial within 50 metres lead as per direction of Engineer-incharge:In cement mortar |
| 2 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30 m to 1.00m depth and refilling etc.80 mm dia nominal bore metre. |
| 3 | 32 mm dia, ISI marked, PVC conduit. |
| 4 | Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required.1 run of Size 6 Sqmm (1/2.80mm) |
| 5 | Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. voltmeter (0 to 500 volts), 1 No. Amp. Meter of O to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II,Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in fal respect.Make:- L&T, SIEMENS, BCH, SCHNEIDER.10 HP Motor |
| 6 | Supplying, erection, testing and commissioning of Horizontal motor pumping set for clear water having head 20. 00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi). Dischage Capacity 1100 LPM ,10 BHP. |
| 7 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 80 mm nominal bore |
| 8 | Supply of GI Elbow/ Bends 80 mm dia. ISI marked. |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum( For Pump platform) |
| 10 | Brick work with common burnt clay modular bricks of classdesignation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 11 | 12 mm cement plaster of mix : 1 :4 (1 cement: 4 fine sand) |
| 12 | Providing, hoisting and fixing above plinth level up to floor fourlevel precast reinforced cement concrete in shelves, includingsetting in cement mortar 1 :3 (1 cement : 3 coarse sand), cost ofsetting in cement mortar 1 :3 (1 cement : 3 coarse sand), cost ofrequired centering, shuttering and finishing with neat cementpunning on exposed surfaces but , excluding the cost ofreinforcement, with 1 :1.5:3 (1 cement : 1.5 coarse sand(zone-111): 3 graded stone aggregate 20 mm nominal size). |
| 13 | Steel reinforcement for R.C.C. work, where not included in thecomplete rate of RCC, including straightening, cutting, bending,placing in position, binding, wastage, overlaps, welded joints,spacer bars, chairs, stays, hangers and annealed steel wire etc.complete in all respect above plinth level.Thermo-Mechanically Treated bars of grade Fe-500Dor more. |
| 14 | Providing and fixing 3\" suction pipe, PVC |
| 15 | Providing and fixing foot valve |
| 16 | Clearance of jungle (L/S) |
AI Tender Summary
Tender Timeline
Dec 31, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 06, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender