Construction Of Toilet At Office Quarter Under Katwa-I Ps Ground Floor
Tender Value
5.97 Lakhs
Estimated cost
Bid Submission
14 Jan 2022
0 days left
EMD
11943
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
katwa → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Toilet At Office Quarter Under Katwa-I Ps Ground Floor
BOQ
| Sl. No. | Item Description |
| 1 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. Pakur Variety |
| 2 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground) 30 mm & upto 37 mm thick wooden shuttering b) Steel shuttering or 9 to 12 mm thick approved quality Ply Board shuttering in any concrete work.In Ground Floor |
| 3 | Brick work with 1st class bricks in ementmortar (1:6)Corr-3 [ P - 2 / 1 ] |
| 4 | 125 thk Brick work with 1st class Brick in cement mortar (1:4) in superstructure for building works all complete in all floor. |
| 5 | Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc. initial straighting and removal of loose rust (if necessary) cuttings to requisite lengthstraightening, hooking and bending to correct shape placing in proper position and binding with 16 gauge black annealed wire at every intersection complete as per drawing and direction. Tor steel/Mild steel |
| 6 | Plaster (to wall,floor,ceiling, etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints including throating, nosing and drip course, scaffolding /staging where necessary (excluding cost of cheaping over concrete surface where necessary) with (1:4) plaster to ceiling (10mm thick) |
| 7 | Plaster (to wall,floor,ceiling, etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints including throating, nosing and drip course, scaffolding /staging where necessary (excluding cost of cheaping over concrete surface where necessary)with (1:6) 15 mm thick plaster tosurface |
| 8 | Plaster (to wall,floor,ceiling, etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints including throating, nosing and drip course, scaffolding /staging where necessary (excluding cost of cheaping over concrete surface where necessary)20 mm thick brickwork |
| 9 | Terrazzo work confirming to IS:2114 of 1962 cast in situ or with precast tiles as directed in floor, dado, staircase etc a) Ceramic tiles fitted to kitchen wall and toilets upto the height of 5 ft (Area of each tile above 0.09 Sq.m) wall |
| 10 | Supplying, fitting and fixing M.S. clamps for door and window frame made offlat bent bar end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction.(cost of concrete will be paid separately)40mm x 6mm 125mm length |
| 11 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mmthickness in floor, lobby, stair, landing & treads etc. ..... {Whitecement and Pigment to be supplied by the Agency] iii) Area of each Slab/tile exceeding 0.60 sq.m but notexceeding 1.00 sq.m. |
| 12 | Supplying, fitting and fixing in position approved PVC door frame (matt finish0 made of extruded PVC multichamber hollow section having dimensions 60mmx50mmx2mm. Horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm 20mmx1.20mm will be inserted on the full vertical side of the frameas reinforcement, the frame willthenbe fixed in the opening with the help of PVC expandable fastner wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. |
| 13 | Supplying, fitting and fixing PVC(37mm thk) shutterof approved quality & shade in position, the style & rail of the PVC door shutter will be made of rigid PVC multicavity hollow chamber of suitable size & section with 2.0mm wall thickness, the section will have 2nos. built in beads, horizontal and vertical section shall be fixed to each other by self tapping screws and 2nos.of solid plastic or MS tubular galvanised brackets of length 200mmx80mm & other 100mmx100mm both 1.20mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105mmx 37mm with 2.0mmwall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200mm long at both ends & screws for both sides. The section frame will then be fitted in by prepanels of size 100mmx20mm, with wall thickness 1.20mm & 2 nos of 6mm dia. bright rod will be inserted horizontally with both side check & nut system and stretches where fixing of hinges/hasp bolt/tower bolt/door ring are required to be strong enough to with stand wear and tear. |
| 14 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 100 mm dia (6.00m each ) A) PVC Rigid pipes . |
| 15 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 100 mm dia (6.00m each ) A) PVC Rigid pipes . 80mm dia (6.00m each ) |
| 16 | B) Reducing socket- 100x80mm[p-18/L] |
| 17 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.[P- 52 / 5] 3 mtr each (i) 80 mm dia. |
| 18 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.[P- 53 /9] (i) 80 mm dia. |
| 19 | Supplying, fitting and fixing plug of approved make conformingto I.S.specifications[P- 53 / 10](i) 40 mm |
| 20 | Supply of G.I. pipes of TATA make including necessary sockets.[P- 102 /1] (ii) Medium quality Supply of G.I. pipes of TATA make including necessary sockets.[P- 102 /1] (h) 80 mm dia. |
| 21 | Supply of galvanised iron socket with I.S.I. mark..[P- 102 /1 |
| 22 | Supply of G. I. pipes of TATA make including necessary sockets[P- 102 /1 e) 40 mm dia(ii) Medium quality |
| 23 | supply of 2 H.P water cool KSB/Crompton greeves/Kirlosker brand submersible pump motor.local market |
| 24 | Labour for fitting fixing jointing and lowering 40 mm dia Delivery pipi with submersible pump etc incl. cutting threading of pipes and fitting fixing panel board with electric line etc complete.(L.S) |
| 25 | (c) For depth upto 150 metre for 40 mm dia. Tube well with top enlargement of80mm dia. (i) 80 mm dia. boring etc. |
| 26 | (i)100 mm dia. boring etc. |
| 27 | Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.)of approved make in white vitreous chinaware in position (excluding cost ofconcrete for fixing).(i) 580 mm long[P-79/1] |
| 28 | Supplying, fitting and fixing white vitreous china best quality approvedmake wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillarcock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nut includingmending good all damages and painting the brackets with two coats ofapproved paint.(iii) 630 mm X 450 mm size |
| 29 | Squating plate with integral flushing in white vitreous chinaware of approved make supplied, fitted and fixed in cement concrete (6:3:1) with jhama chips complete. 450 mm x 350mm.[P-80/7] |
| 30 | Supplying, fitting and fixing 10 ltr P.V.C low down cistern conforming to I.S specification with PVC fittings complete. C.I brackets in/c two coats of painting to bracket etc..[P-36/2] |
| 31 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in whitevitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete.[P-80/6] |
| 32 | CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (CodeNo.5041 & Model - FLORENTINE of JAQUAR or similar brand |
| 33 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreouschina ware of approved make complete in position with necessary bolts,nuts etc.(a) With \"P\" trap (with vent) |
| 34 | (i) Chromium plated angular Stop Cock with wall flange (Equivalentto Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 35 | (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent toCode No. 5083 & Model - Florentine of Jaquar or similar brand) |
| 36 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (4:1) including two 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the top slab with necessary fittings,...... of Engineer-in-charge. for 50 user.[p-88/3 ] |
| 37 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (6:1) band all round and cement brick work (6:1) upto 0.90 metre from top with 19 mm thick cement plastering (4:1) toinside face upto the depth of cement brick work,..... complete. [p-89/iv ] |
| 38 | d) Chromium plated Hand shower with Flexible Tube &fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037& Model - Florentine of Jaquar or similar).). |
| 39 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm(depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides,bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chipsover a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to insidewalls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit,providing necessary invert with cement concrete (1:3:6) with stone chips as perdirection, neat cement finishing to entire internal surfaces, top of the pit covered with100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcementsupto 1% and shuttering including 6 mm thick cement plaster (1:4) in all externalsurfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved makesupplied, fitted and fixed in the slab with necessary fittings, necessary earthwork inexcavation in all sorts of soil, filling sides of the pit with earth and removing spoilsafter work complete in all respect with all costs of labour and materials. |
| 40 | Supplying, fitting and fixing PVC pipes of approved makeof (mediumduty) conforming to ASTMD - 1785 and threaded to match with GI Pipesas per IS : 1239 (Part - I). with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket ........... For exposed work.[P-12/19i] (ii)25mm dia. |
| 41 | Supplying, fitting and fixing PVC pipes of approved makeof (mediumduty) conforming to ASTMD - 1785 and threaded to match with GI Pipesas per IS : 1239 (Part - I). with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket ........... For exposed work.[P-12/19i] (ii)20 mm dia. |
| 42 | Supplying, fitting and fixing PVC pipes of approved makeof (mediumduty) conforming to ASTMD - 1785 and threaded to match with GI Pipesas per IS : 1239 (Part - I). with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket ........... For exposed work.[P-12/19i] (iii) 15 mm dia. |
| 43 | Add GST @12 % |
| 44 | AddLabour Welfare Cess @1.00 % |
AI Tender Summary
Tender Timeline
Dec 31, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender