Kiifb Mrs Peringome Sitc Of Fire Fighting System Electrical Fire Fighting Work In Kannur District Fire Fighting
Tender Value
11.61 Lakhs
Estimated cost
Bid Submission
07 Jan 2022
0 days left
EMD
17420
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
→ Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Kiifb Mrs Peringome Sitc Of Fire Fighting System Electrical Fire Fighting Work In Kannur District Fire Fighting
BOQ
| Sl. No. | Item Description |
| 1 | OD83597/2021-2022S I T C of Main electric motor driven fire pump sets suitable for automatic operation and consisting of horizontal type, centrifugal pump of cast iron body and cast iron impeller with stainless steel shaft, to ensure a minimum pressure of 3.5 kg/sq cm at highest and fastest outlet at specified flow of 450 lpm conforming to IS:1520 with 5 HP squirrel cage induction motor , TEFC synchronous speed 2900 RPM, suitable for operation on 415 /vm 3 phase 50 Hz, AC with IP55 protection for enclosure horizontal foot mounted type. |
| 2 | OD83598/2021-2022 S I T C of M S Pipe Class \" C\" medium grade with ISI Mark complete with allnecessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anti corrosive primer coat over which two coats of signal red paint. 100 mm dia |
| 3 | OD83599/2021-2022 S I T C of under ground piping M S pipe Class \"B\" medium grade ISI mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. and piping shall have anti corrosive wrapping and coating treatment including cost of excavation& back filling if necessary - 100 mm dia |
| 4 | OD83600/2021-2022 S I T C of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1.6 , teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 100 mm dia |
| 5 | OD83601/2021-2022 S I T C of Non Return Valve single plate wafer type swinch check valve, short pattern type with integral hinge pin disc , nitrile rubber O - ring seat and face sealing as per IS: 5312 with ISI mark. - 100 mm dia |
| 6 | OD83602/2021-2022 S I T C of Ball Valve cast iron body as per IS 5312 with ISI mark - 25 mm dia |
| 7 | OD83603/2021-2022 SITC of Hose reel drum made of Mild steel , Hose reel drum as per IS 884b with 30 m length rubber hose of working pressure7 kg/cm2 and shut off nozzle range of jet flow 24 ltr/min, range of jet throw 6 mtrs with ISI mark |
| 8 | OD83604/2021-2022 S I T C of Fire brigade Inlet connection fabricated from 100 mm dia MS Class Bmedium grade pipe comprising of two way 63 mm dia gun metal male threaded non return valve. |
| 9 | OD83605/2021-2022 S I T C of Fire Extinguisher dry chemical powder (ABC) Stored pressure type 4 kgcapacity as per IS:15683 with ISI mark and with initial charger and installation brackets |
| 10 | OD83606/2021-2022 Supplying and installing in position LED \"EXIT\" sign boards of suitable size with battery backup. |
| 11 | OD83607/2021-2022 Supplying and installing in position LED \"FIRE EXIT\" sign boards of suitable size with battery backup |
| 12 | OD83608/2021-2022 Supply & installing in position laminated sheet of \" FIRE EVACUATION PLAN \" of suitable size fixed on wall & necessary accessories to fix the plan on wal |
| 13 | OD83609/2021-2022 Fabrication, Supplying, Installation, Testing and Commissioning of Electrical control panel of cubical construction, floor wall mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade (RED) after 7 tank treatment process, cable alley, inter connection, havingwitchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for operation on 415 V, 3 phase, 50 Hz. AC supply with enclosure protection class IP 42 required. (a) 32Amps. TP SFU for Terrace Pumpfully automatic DOL starter with current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/ OFF operation. (b) Voltmeter (0-500 Volts) with selector switch. (c) Ammeter (0-30 Amps) with selector switch & CT\"s etc. (d) One set of 3 Phase indicating lamp (R,Y,B). (e) One set of Push buttons with indicator (START & STOP). Including one Remote control station with START & STOP. |
| 14 | OD83610/2021-2022 Supply, Installation, Testing & Commissioning of Pressure Switch with 12/15 mm ØIsolation Valve, G.I. Nipple, Elbow etc. in an approved manner. |
| 15 | OD83611/2021-2022 Supply, Installation, Testing & Commissioning of Pressure Gauge of 100mm Ø, 0 -200 PSI fitted with suitable Ø Pad Cock Valve, and G.I Pipe, Elbow etc. as per requirement in an approved manner |
| 16 | OD83612/2021-2022 Supply, Installation, Testing & Commissioning of spring loaded relief valve, suitableØ with necessary Coupling to be fitted on top of Down comer System. |
| 17 | 1.17.1 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm |
| 18 | 1.17.12.Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x2.5 sq. mm |
| 19 | 1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 20 | 2.16Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts \"C\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 21 | 90.12.7.40 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp |
| 22 | 90.16.1.10Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.25 mm GI conductor (10 SWG) |
| 23 | OD83686/2021-2022 Fabrication, supply, testing and commissioning M.S fire water tank in steel ofcapacity 10000 litres Size of tank: 3.5M x 2.6 M x 1.2 M using the materials mention below: Containerwith 8mm thick plain sheet Bottom support with ISB 250, Bottom reinforcement with ISMC 100 + ISA 90 x 90 x6 mm, Side reinforcement with ISA 75 x75 x 6 mm and 50 x50 x 6 mm |
AI Tender Summary
Tender Timeline
Dec 31, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 10, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender