Annual Maintenance And Repair At 132 Kv S-S Bodla (Agra)
Tender Value
48467
Estimated cost
Bid Submission
01 Feb 2022
0 days left
EMD
1000
Bank guarantee accepted
Document Fee
840
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bodla → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Maintenance And Repair At 132 Kv S-S Bodla (Agra)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work.(CSI No. 4.01) |
| 2 | Clearing jungle including uprooting of rank vegetations,grass, bush,wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. (CSI No. 4.08) |
| 3 | Concrete with 4cm gaugestone ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.02) |
| 4 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 3:1.5:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work(CSI No. 5.21) |
| 5 | First class brick work in 1:4 cement and coarse sand (F.M.1.8 to 2.5)mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work (CSI No. 6.03) |
| 6 | Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.57) |
| 7 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) |
| 8 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03) |
| 9 | Supply and fixing galvanised mosquito proof jali (16x24 gauge) withM.S. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame. (CSI No. 9.18) |
| 10 | Spreading over leaky roofs with bitumen paints at 0.45 Kg per sq.m. including sweeping, cleaning the roof with brushes, heating of the paints upto the required temperature,pouring it on the surface, spreading of necessary quantity of approved coarse sand 1 cft. per 100 sft. and including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.05) |
| 11 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.07)) |
| 12 | S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cementmortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15) |
| 13 | 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.) (CSI No. 11.20) |
| 14 | Painting or varnishing old iron work in small areas or old woodwork with one coat of ready mixed priming paint and Two coat ofapproved superior quality ready mix paint \"Luxol\" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.(CSI No. 13.03+13.02) |
| 15 | Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21) |
| 16 | Painting one coat with APEX or equivalent brand weather coat paint on old wall surfaces (well prepared with Birla putty and Two coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.24+13.23) |
| 17 | Painting two coatwith Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over previously painted surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. (CSI No. 13.26+13.27) |
| 18 | Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres.(CSI No. 15.01) |
| 19 | Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres.(CSI No. 15.03) |
| 20 | Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) |
| 21 | Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12) |
| 22 | Repair to plaster or pointing in patches in 1:4 including removal of old plaster racking out joints to 1 cm.(3/8\") depth,watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work . (CSI No. 20.02) |
| 23 | Repair to 2.5 cm (1\") cement concrete floor in patches including up to 10 cm.(4\") depth renewing 8 cm.(3\") base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm.(1.5\") gauge brick ballast as in C.C.floor consisting of one part cement 2 parts approved coarse sand and 4 parts approved stone grit including supply of all materials.labour and T&P etc. required for proper completion of the work.(CSI No. 20.03) |
| 24 | Renewing panes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(CSI No. 20.04)(i) glass of 4 mm thick. |
| 25 | Fixing panes of glass with and including putty brads and including supply of all materials,labour and T&P etc. required for proper completion of the work but excluding cost of glass. (CSI No. 20.07) |
| 26 | Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.12) |
| 27 | Same as in item No.20.12 above but for inspection chamber..(CSI No. 20.13) |
| 28 | Cleaning of main drain or width more than 300 mm.including disposal of waste refuses sludge out side the board\"s area including washing and cleaning by clean water completely as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.14) |
| 29 | Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made).(CSI No. 20.16) |
| 30 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. (a) L drops 16 mm dia x 300 long. {CSI No. 20.17(a)} |
| 31 | (b) Tower bolts 10 mm dia x 250 mm long. {CSI No. 20.17(b)} |
| 32 | © Tower bolts 10 mm dia x 100 mm long. {CSI No. 20.17(c)} |
| 33 | (d) Iron hinges 100 mm size.12 gauge.thick {CSI No. 20.17(d)} |
| 34 | (f)M.S.handles 100 mm size{CSI No. 20.17(f)} |
| 35 | (h)L-drop 16 mm dia x 200 mm long. {CSI No. 20.17(h)} |
| 36 | Leveling and dressing of land by cuttingfilling and upto 150 mm. depth complete with all labour, T&P etc. required for proper completion of the work.(CSI No. 20.18) |
| 37 | Polishing of marble floor by cleaning with carborandum stone after washing with tartre cleaning powder etc. and finally with French mansion polish including supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 20.22) |
| 38 | Supply and mixing bleaching powder in over head tank as required or as directed by Engineer - in - charge.(CSI No. 20.29) |
| 39 | Supply and replacing of 6 Amp. piano type switch of \" Anchor\" orequivalent make of approved quality including all materials,labour and T&P etc. (CSI No. 22.02) |
| 40 | Supply and replacing of 6 Amp. Piano type socket of \"Anchor\"equivalent make of approved quality including all materials,labour and T&P etc.(CSI No. 22.03) |
| 41 | Supply and replacing of 16 Amp.Piano type switch of \"Anchor\" orequivalent make of approved quality including all materials,albour and T&P etc.(CSI No. 22.04) |
| 42 | Supply and replacing of 16 Amp.Piano type socket of \"Anchor\" orequivalent make of approved quality including all materials,labour and T&P etc.(CSI No. 22.05) |
| 43 | Rewinding of burnt ceiling fan with approved copper wire including cost of all materials, labour and T&P etc. complete (Burnt wirewill not be taken back.)(CSI No.22.08) |
| 44 | Taking off the defective ceiling fan from position & re hanging after receiving the repaired fan and proper connection etc.(CSI No.22.10) |
| 45 | Greasing of ceiling fan after cleaning the bearing and shaft withoil / petrol and its testing..(CSI No.22.11) |
| 46 | Attending to petty maintenance service like plumbingservice,welder service, mansion service and carpenter servicerequired as below. Job attending by one no. Plumber/welder/mason/carpenter with oneno. helper per hour or part of an hour.(C.S.I. No. 22.18) |
| 47 | Supply and plantation of approved 2 years old plants, duly plantedin earthen Gamla of approximate size 300x 300 mm nominal size,filled with compost manure and sand mixed in approved proportionincluding cost of approved quality earthen gamla, compost manure , sand and all other materials, labour and T&P etc reqd. for proper completion of work. (CSI No. 23.08) |
| 48 | Supply and planting seasonal flower plants such as Genda, Rose, Ostar, Flox, Guldawadi,Gulmehndi, Cochia etc. including digging hole of proper size, manure and treatment with proper chemical etc., including cost of fertilizer, manure, all materials, labour and T&P etc complete in allrespects. (CSI No. 23.10) |
| 49 | Supply and planting permanent ornamental plant like Croten, Varil pristal, Glodulus, Lily, Fern, Bogenbelia etc. including cost of plants, manure, pesticides, fertilizer, labour and T&P etc complete also including preparation of flower bed. (CSI No. 23.11) |
| 50 | Supply and plantingAshoka, Pendula, Mango, Neem,Peepal,Sheesham etc in pits including cost of all materials, labour and T&p etc complete in all respects.(Cost of digging pitshall be paid separetely as per item no. 23.08) (CSI No. 23.12) |
| 51 | Arranging one mali for maintenance of lawn & plants, including cost of Mali, required T&P and other miscellaneous work as per direction of Engineer I/c . (CSI No. 23.15) |
| 52 | Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01)a |
| 53 | Same as above but for 20 mm dia. (CSI No. 26.01)b |
| 54 | Same as above but for 25 mm dia.(CSI No. 26.01)c |
| 55 | Making water connection of GI pipe line with GI Mains ( 25 mm to 100 mm ) dia. by providing and fixing Ferrule (25 mm dia) GI union and nipple including cutting and threading the pipe, inspection, testing, cutting and making good the road, executing bond with Nagar maha palika, fixing of pipe line upto the points near the building complete work including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 26.03) |
| 56 | Providing and fixing full way 15mm dia G.M. gate valvewith wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.04)a |
| 57 | GM Full way Gate Valve 25 mm dia.(CSI No. 26.04)c |
| 58 | Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. (CSI No. 26.12) |
| 59 | Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16)a |
| 60 | CP BRASS Angle Valve HEAVY QUALITY( L&K or equi. ) (CSI No. 26.16) i |
| 61 | CP BRASS Piller cock HEAVY QUALITY ( L&K or equi. ) (CSI No. 26.16) j |
| 62 | CONCEALED STOP COCK HEAVY QUALITY ( L&K or equi. )(CSI No. 26.16) k |
| 63 | Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17) |
| 64 | Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) |
| 65 | Providing and fixing in position 32 mm. dia P.V.C.WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.14) |
| 66 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (CSI No. 28.22) |
AI Tender Summary
Tender Timeline
Dec 30, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender