Retrofitting To Pwss At Khandare Tal.Murbad Dist.Thane
Tender Value
24.96 Lakhs
Estimated cost
Bid Submission
10 Jan 2022
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
murbad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Retrofitting To Pwss At Khandare Tal.Murbad Dist.Thane
BOQ
| Sl. No. | Item Description |
| 1 | Item no. 1. Excavation for foundation in hard murum, including removing the excavated material up to a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed Engineer-in- charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.Lift 0.00 to 1.50 mt.MJP . D.S.R 21-22 I/P 2/39, |
| 2 | Item no.2 Providing & casting in situ cement concrete M - 20 of trap / granite / quartzite / gneiss metal of approved quality for R.C.C. work, Beams & lintels as per detail drawing & designs or as directed by Engineer in charge .... Etc complete MJP. D.S.R-21-22-19 I/P 4a/49, 6094+609.4 |
| 3 | Item no.3 Providing and fixing in position steel bar reinformenent of various dia. For R.C.C. pile caps Footing Foundation Slab Beams columns as per details designs drawing and schedules including cutting bending hooking the bars banding with wires including MJP. D.S.R-21-22 I/P 8b/52, 45523+4552.3 |
| 4 | Item no.4. Dewatering the excavated trenches and pools of water in the building trenches, well works by by using pumps and other devices including disposing off water to safe distance as directed by Engineer -in¬charge (including cost of machinery, labour, fuel), etc. complete. MJP. D.S.R-21-22 I/P 16/42, 64+6.4 |
| 5 | Item No.l. Providing greeting and giving test of 150 mm diameter submersible pumps set confirming to IS 8043 and IS 9283 Pumps shall be suitable for various delivery head and discharge with stainless steel pump shafts and bronze impeller . Motor suitable for working on 415 Volts + 10%, 3ph, 50 Hz . AC supply ,supply cable guards , thrust carbon / fiber bearing to accept entire hydraulic thrust. Waterproof winding shall be provided .The pump sets shall be suitable for direct coupling. Pumps shall have suitable outlet as per manufacturer’s design. Anti-thrust stream-lined non-return valve shall be provided with pump. Suitable strainer Shall be provided. 3 core, single / double Run copper conductor submersible type flat cable 3mt. and two pairs electronic clamps shall be provided along with the pump. 7.50 BHP Submersible pumps Discharge —4.28 litsec( MJP, Elect-Mech.DSR 2021-22, Page No.1, Item No.PMl-2-10) |
| 6 | Item No.2. Supplying and erecting armoured 3 core 2.5 square mm PVC sheathedA) submersible type copper armouredcable 3 Core - 2.5 Sqmm. (MJP, Elect-Mech.DSR 2021-22, Page No 36, Item No. CB- 7-2-2) |
| 7 | Item No.9 MSEB charges |
| 8 | Item No.l Excavation for foundation / pipe trenches in earth soil of all types, sand, gravel & softmurum including removing the excavated material upto a distance of 50 m & lifts as below, stacking &spreading as directed, normal dewatering, preparingthe bed for foundation & excluding the backfillingetc complete.a) Lift 0 to 1.50 M.M.J.P.D.S.R 21-22 PN-42 ….150+15 |
| 9 | Item No.2 Excavation for foundation / pipe trenches in hard murum and boulders including removing the excavated material upto a distance of50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc a) Lift 0 to 1.50 M.M.J.P.D.S.R 21-22 I/PN-42…... 170+17 |
| 10 | Item No. 4 Filling in plenth and floors/trenches murum bedding with approved murm formM.J.P.D.S.R 21-22 I/PN-45…... 84+8.40 |
| 11 | Item No.5 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint ompression fitting joint or flanged joint excluding/specials, including transportation and freight charges, inspection charges,90 mm,(M.J.P.D.S.R 21-22,1. No-1 b iii,ii P.No-114 |
| 12 | Item No.6 Lowering, Laying and Jointing H. D. P. E./M. D. P E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt 90 mmM.J.P.D.S.R 21-22No 1- B vi,P.No.115, |
| 13 | Item No 7 - Providing double flanges Sluice Vawe conferming IS 2906/14846 Incl worn gear arrangement as per test pressure stainless steel spindle, cap,ini. All taxes transportation etc.80 mm dia. S.V.(MJP DSR 21-22,1. No-2 a ii P.No- 132 |
| 14 | Item No 8 .: - Lowering & laying And jointing in position following CIDF/Refluxe valve,Butterfly valve and Sluice valve incl. cost of all labour jointing material inch nuts bolts and giving satisfactory hydraulic tesing etc complete 80 mm dia. S.V.(MJP DSR 21-22,1. No-2 a ii P.No- 135 |
| 15 | Item No.9 Providing & constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding , B.B. masonry in C.M. 1:5 proportion, precast R.C.C. frame & cover etc. complete.60X45X90 cm.M.J.P.D.S.R 21-22,1. No-1 A, P No-220 |
| 16 | Item No. 10:- Providing & supplying Air valves as Der IS-10845 & MJP\"s standard specifications of approved make & quality of following diameter including all taxes , all transportation charges, inspection charges loading, unloading & stacking etc completeAir Valve Single Ball flanged 25 mm Type PN-1M.J.P.D.S.R 21-22 I. No-5 a iii, P.No- 136 |
| 17 | Item No 11 Lowetring, laying & fixing in proper alignment & position all types of Cl air valves as directed by Engineer-In-Charge including cost of all transportation, cost of all material & giving satisfactory hydraulic testing etc complete.25 mm Type PN-1(MJP DSR 21-22,1. No-10 a iii, P.No- 137 |
| 18 | Item No.12 Providing and laying in situ Plain Cement concrete in proportion M-150 of trap metal for foundation & bedding, including out water manually, form work, capacity & caring etc complete.(M.J.P.D.S.R 21-22-1 b, P no- 49)5185+518.50 |
| 19 | Item No.l3:- Refilling the trenches from excavated stuff with soft material in 15 cm layers with all leads & lifts including consolidation surcharging .... etc complete.M.J.P.D.S.R 21-22 I/PN-45…... 84+8.40 |
| 20 | Item No.1Excavation for foundation / pipe trenches in hard murum and boulders including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc a) Lift 0 to 1.50 M.M.J.P.D.S.R 21-22 I/P 3/42 170+17 |
| 21 | Item No.2:- Filling in plinth and floors / trenches murum beddingwith approved murum from excavated materials from foundation in in 15 to 20 cm. Layers including watering,compaction etc.(MJP DSR 21-22 I. No-19, P no-4584+8.40 |
| 22 | Item No.3 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint ompression fitting joint or flanged joint excluding/specials, including transportation and freight charges, inspection charges,75 mm, 8kg(M.J.P.D.S.R 21-22,1. No-1 b iii,ii P.No-113 |
| 23 | Item No.4 Lowering, Laying and Jointing H. D. P. E./M. D. P E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt 75 mm(M.J.P.D.S.R 21-22,1. No-1 b iii,ii P.No-115 |
| 24 | Item No 5 - Providing double flanges Sluice Vawe conferming IS 2906/14846 Incl worn gear arrangement as per test pressure stainless steel spindle, cap,ini. All taxes transportation etc.65 mm dia. S.V.(MJP DSR 21-22,1. No-2 a iii P.No- 132…...4966+496.60 |
| 25 | Item No 6 .: - Lowering & laying And jointing in position following CIDF/Refluxe valve,Butterfly valve and Sluice valve incl. cost of all labour jointing material inch nuts bolts and giving satisfactory hydraulic tesing etc complete 65 mm dia. S.V.M.J.P.D.S.R 21-22,1. No-4 ii, P.No- 135...1251+125.10 |
| 26 | Item No.7Providing & constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding , B.B. masonry in C.M. 1:5 proportion, precast R.C.C. frame & cover etc. complete.60X45X90 cm.M.J.P.D.S.R 21-22,1. No-1 A, P No-220 |
| 27 | Item No.8Providing and laying in situ Plain Cement concrete in proportion M-150 of trap metal for foundation & bedding, including out water manually, form work, capacity & caring etc complete.(M.J.P.D.S.R 21-22,1. No-1 b, P no- 47)5185+518.50 |
| 28 | Item No.9 :- Refilling the trenches from excavated stuff with soft material in 15 cm layers with all leads & lifts including consolidation surcharging .... etc complete.(M.J.P.D.S.R 21-22 I.No.17, P.No.42 84+8.40 |
| 29 | Item No 10- Providing 15 mm service connection on Distribution network of G I Pipe linesMJP DSR 2021-22/P No65/I No.17 |
| 30 | SYNTEX TANK AND PLATFORM ( Item Nos. 1 to 7 )5 QuntaityeachItem No. 1 :Excavation for foundaton in hard murum &boulders including removing the excavated material…etccomplete MJP DSR-2021-22 ,pg.no.42/I.no.3) |
| 31 | Item No.2:-Providing dry trap/granite/quartzite/gneiss,rubble stone soling in 15cm to 20 cm thick layers including hand packing and compacting, royalty charges etc. complete( MJP, DSR 19-20 Page No.35 ,Item No.Bd1 |
| 32 | Item No.3:-Providing and laying in situ, following grades of C.C. of trap /granite / quartzite / gneiss metal for foundation and bedding including dewatering, formwork, compacting and curing, finishing, etc. complete. ( MJP, DSR 19-20 Page No.37 ,Item No. 1 B |
| 33 | Item No.4:- Providing and laying in situ cement concrete of trap /granite /geniss metal for RCC work in foundation like raft ,grillage ,strips foundation and footing of RCC Column and steel stanchion including normalsdewatering , plywood form work ,bully/steel propups compaction ,finishing and curing etc completed .MJP. DSR 19-20 I No 2bP.No 37 |
| 34 | Item No.5:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) MJP, DSR 2019-20 , I.No. 8b, P.No. 40 |
| 35 | Item No.6:- Providing stuctural steel work in single stanchionscomposed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats,gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/ bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete( MJP, DSR 19-20 Page No.36 ,Item No. 4 |
| 36 | Item No.7:- Providing and fixing sintex tank of following capacityetc. complete.PWD DSR 19-20 I no 42,54 Pn 358 |
| 37 | Providing and installing simple gravity feeddisinfection agreement with TCL Powder solution on the percolation well / servicereservoir including solution tank feeding pipedosing arrangement all other accessories giving trial and test etc. complete. |
AI Tender Summary
Tender Timeline
Dec 30, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 10, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender