Uttar Pradesh Power Transmission Corporation Limited-UPPTCL has published Construction Of Civil Works For 01 No 132 Kv Line Bay For Chitradurga Renewable Energy India At 132 Kv Sub Station Lalganj Azamgarh. Submission Date for this Tender is 02-02-2022. Transmission Line Tenders in azamgarh Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01) |
2 | Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPPCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 4.05) |
3 | Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 kmoutside UPPCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10) |
4 | Levelling and dressing and making proper slopes including cuttingand filling of earth upto a depth 100mm if so required includingall labour T&P etc. required for proper completion of the work . (CSI No. 4.11) |
5 | Concrete with 4cm gaugestone ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.02) |
6 | Concrete with 4cm gaugestone ballast, coarse sand(F.M. 1.8 to 2.5) and cement in proportion of 8:4:1 in foundation & under floors including supply of all materials, labour & T&P etc. complete. (CSI no. 5.04a) |
7 | Concreting of 40 mm thick RCC trench covers in mild steel framework with RCC 1:1.5:3 in Cement,Chopan coarse sand(F.M. 1.8 to 2.5) and 2cm gaugegraded hard stone ballast with 3mm thick floating coat of neatcement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (CSI No. 5.18) |
8 | Concrete work with 40 mm gauge brick ballast obtained from breaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in CSI no. 5.01 includingcost of all labour,materials, T&P etc required for proper completion of work. (CSI No. 5.20) |
9 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 1:1.5:3.including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work(CSI No. 5.21) |
10 | RCC work with cement approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. . (CSI No. 5.23) |
11 | RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P (CSI No. 5.24) |
12 | RCC work with cement, approved coarse sand (F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inlighter beams i.e. having span upto6m, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.25) |
13 | RCC work with cement approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.27) |
14 | Same as item no.13 (CSI No. 5.27) above but in RCC pile caping, gantry walls/columnfoundations and RCC pedestals but in the proportion 1:1.5:3. (CSI No. 5.28) |
15 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sandin proportion 1:1.5:3in RCC T beam-slab and column , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.29) |
16 | First class brick (class-150) work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01) |
17 | First class brick (class-150) work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in Super structure including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01+6.07+6.08) |
18 | First class brick (class-150) work in 1:4 cement and coarse sand (F.M.1.8 to 2.5)mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work (CSI No. 6.03) |
19 | First class brick work in 1:4 cement and coarse sand(F.M.1.8 to 2.5)mortar in super structure in steps, parapet andfacia including nacessary cutting moulding of bricks andincluding supply of all materials labour & T & P required forproper completion of the work including placing & fixing ofreinforcement in position with 24 B.W.G. binding wire withcentering shuttering complete but excluding cost of reinforcementand its bending which shall be measured separately. (CSI No. 6.17) |
20 | Brick work in foundation & plinth with old dismantledbricks (supplied by department free of cost) and coarse sand of F.M. 1.5 to 2.0mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete.(CSI No. 6.18) |
21 | Supply and fixing of 3.5 cm thick Shishum wood door and window Jali shutters withpanels of heavy quality galvanized iron wire mesh of size 14 x 24 withnecessary beading including supply and fixing of wooden cleats and stopsand including fixing and adjustment of hinges. but excluding supply of fixtures .(CSI No. 8.41) |
22 | S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of Shishum wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour andT&P etc. required for proper complete. (CSI No. 8.44) |
23 | Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.57) |
24 | Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. (CSI No. 8.60) |
25 | Supply and fixing Anodized Aluminium Door fittings like 2 no 150 mm handles,2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.61) |
26 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) |
27 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03) |
28 | Same as in item no.27 (CSI No.9.03) above but when steel is provided by the Department.(CSI No. 9.04) |
29 | Supplyof 25 mm dia.M.S. Anchor bolts (conforming to IS-226) 500 mmlong with base plate(50x50x6 mm)welded with anchor bolts,including its threading upto a length of 10cm. and galvanizing upto 15cm from top, also supply of a pair of galvanized standard nuts with threading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work.(CSI No. 9.14) |
30 | Fixing and grouting 25 mm dia M.S. Anchor bolt in proper alignment level and setout with the help of a template including supply of all labour T&P etc. reqd. for proper completion of the work. (labour rates only) . (CSI No. 9.15) |
31 | Providing and fixing steel glazed window and ventilators ofstandard rolled Mann or Mahavir steel sections conforming to IS7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion i.e. 1 part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included). (CSI No. 9.17) |
32 | Providing M.S. Frames work, rack etc for R.C.C. Trench covers and edging with M.S. angles and M.S reinforcement including cutting, bending and welding as per approved drawing. Therate is including cost of all labour, materials etc. as required for proper completion of the work.(CSI No. 9.20) |
33 | Fixing and grouting of trench edging in proper level andalignment including cost of all labour, and T&P etc. required forproper completion of the work but excluding cost of C.C. (labour rates only) . (CSI No. 9.30) |
34 | Concrete with 4cm gauge I class brickballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) |
35 | Fixing of template in position level and alignment for groutingof Anchor bolt in Aux.structure (labour rate only). (CSI No. 9.32) |
36 | Fixing of cable trench racks in proper position and alignment including cost of all labour, material and T&Petc. required for proper completion of the work (Labour rate only). (CSI No. 9.33) |
37 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07) |
38 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09) |
39 | 6 mm. thick plaster with 1:3 cement & coarse sand includinglabour, materials & T&P etc. required for proper completion ofthe work. (CSI No. 11.17) |
40 | Champering the edge of concrete in auxiliary structure, of size 25 mm wide in triangular section including all materials, labour & T&P etc complete. (CSI No.11.18) |
41 | 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumtion 0.044 bag/Sq.m.) (CSI No. 11.20) |
42 | 2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specifiedand removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.02) |
43 | 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.04) |
44 | First class bricks on edge floor laid dry, joints sand filled,including preparation of base to proper slope and its rammingincluding supply of all material labour & T&P etc. required forproper completion of the work. (CSI No. 12.07) |
45 | Providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& T&P etc. required for proper completion of work. (CSI No. 12.14) |
46 | Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint "Luxol" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01) |
47 | Same as in item no.46 (CSI No.13.01) above but for every coat after first coat. (CSI No. 13.02) |
48 | Finishing walls with water proof cement paint of approved madelike "Super Snowcem" or equivalent quality on new work withtwo coats to give an even shade including supply of allmaterials, labour etc. required for proper completion of work. (CSI No. 13.17) |
49 | Same as in item no.48 (CSI No.13.17) above but for each coat of water proof cement paint after the first two coats to give an even shade. (CSI No. 13.18) |
50 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) |
51 | Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22) |
52 | Same as in item no.51 (CSI No.13.22) above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23) |
53 | Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25) |
54 | Same as in item no.53 (CSI No.13.25) above but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint. (CSI No. 13.26) |
55 | Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres. (CSI No. 15.03) |
56 | Laying cement concrete road slabconsisting of 1 part cement 1.5 part approved coarse sand and 3 part approved 20mm down graded stone aggregate over prepared sub grade after its rectification and bringing it to proper camber and shape and making good to the satisfaction of E/I inclduing cost of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.13) |
57 | Filling of 20 mm. wide 100/150 mm. deep joint with coarse sand and saw dust mixed with hot bitumen etc. complete including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.14) |
58 | Renewing panes of 4 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(b) glass of 4 mm thick. (CSI No. 20.04,806bi) |
59 | Placing of trench cover of all size in proper position including transportation from different places within the S/S area including all labour, T&P etc. required for proper completion of the work as per direction of Engineer - in - charge. (CSI No. 20.11) |
60 | Wiring point for light with 1.5 sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cable inheavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch & ceiling rose/ angle/batten holder on 3 mm thickphenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. (PWD ELE. SCH.2018,131C) |
61 | Same as in item no.60 (PWD ELE SCH.2018,131C) above but for fan/fresh air fan.(PWD ELE. SCH.2018,133C) |
62 | Same as in item no.60 (PWD ELE SCH.2018,131C) but for plug.(PWD ELE. SCH.2018,134C) |
63 | Supply and wiring of submains with 2 nos. 2.5 sq.mm & with 1 no earth wire of 1.5 sq.mm FRLSH PVC insulated 1100V grade single core multistrand copper conductor cable in existing PVC conduit complete,including supplyof all materials, labour and T&P etc.required for propercompletion of the work as directed by Engineer in charge.(PWD ELE. SCH.2018,291) |
64 | Supply and wiring of submains with 2 nos. 4 sq.mm & with 1 no earth wire of 2.5 sq.mm FRLSH PVC insulated 1100V grade single core multistrand copper conductor cable in existing PVC conduit complete,including supplyof all materials, labour and T&P etc.required for propercompletion of the work as directed by Engineer in charge.(PWD ELE. SCH.2018,291A) |
65 | S/F of 6/10/16/20/25/32 Amp. MCB of approved make and as per sample approved by E/I (10KA)(PWD ELE. SCH. 2018, 1002, CAT A) |
66 | S/F of power plug with 15A/250V flush type switch and 5 pin 15A/250V flush type universal socket in suitable MS box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3 mm thick fixed with brass machine screw and cup washer. . (PWD ELE. SCH.2018, 1139) |
67 | S/F 1200 mm 48" ceiling fan of HAVELLS OR CROMPTON MAKE including installation and T&P with all respect (NSI Approved) |
68 | Supply and fixing ofLED Tube Light batten fittingsuitable for up to 1 X 22 watt LED tube light on surface complete in all respect. (PWD ELE. SCH.2018, 1413A Cat-AA) |
69 | Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and tothe satisfaction of Engineer in charge. etc.(PWD ELE. SCH.2018,148A) |
70 | Providing and fixing of 110 mm dia PVC pipe 4 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.18) |
71 | Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made). (CSI No. 20.16) |
72 | S/F of switch box of made up of 16SWG (1.5mm) thick M.S. sheet of 150x150x65mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the E/I. (PWD ELE. SCH.2018,160) |
73 | Same as item no 72 (PWD ELE. SCH. No. 159) but for 200x250x65 mm size. (PWD ELE. SCH.2018,162) |
74 | Hire Charges ofTyre mounted excavator (JCB etc.) including cost of fuel along with Driver/Operator.(Ch 02,Sl No.21h ,16.34)+ 10 % C.P |
75 | Same as in item no.53 (CSI No.13.25) above buton previously painted surface. (CSI No. 13.27) |
76 | Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21) |
77 | Same as in item no.51 (CSI No.13.22) above buton previously treated surface. (CSI No. 13.24) |
78 | Supply & Installation of Exhaust fan(10") Havells or equivalent make. Including supply of all material, labour,T&Prequired for proper completion of the work. (NSI Approved) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail