Tender For Setting Up Of Mechatronics And Iot Lab For Setting Up Of Mechatronics And Iot Lab , Electronics Technology Division , Soldering Sectionadvanced Soldering Stationsoldering Iron 15-30W 220V Digital Temperature Control With Tip Set, Stand An-Delhi

Tender For Setting Up Of Mechatronics And Iot Lab For Setting Up Of Mechatronics And Iot Lab , Electronics Technology Division , Soldering Sectionadvanced Soldering Stationsoldering Iron 15-30W 220V Digital Temperature Control With Tip Set, Stand And Tip Wiper ) Soldering Wire Reel ( 0.5 Kg ) 60 / 40, 22 Guage Soldering Wire With Internal Fluxwire Stripper Wire Stripper / Cutter Awg12-22, Size 6 Inchwire Nipperdigital Multimeterdc Voltage Range ( Volts ) : 200Mv - 600V, Ac Voltage Range ( Volts ) : 2V - 600V, Dc Current Range ( Amp ) : 200?A - 10A, Ac Current Range ( Amp ) : 200?A - 10A, Resistance Range ( Ohm ) : 200O - 20Mohm, Continuity, Diode Checking, Data Hold3rd Hand With Magnifying Glass With Light Anti-Static Mat Size: 2 X 4 Feet, Thickness: 3Mm, 2 Grounding Chords, 5 Wrist Strap Desolder Pump Cutter Blade With Holder , Heat Gun~230V, 1800 Watts, Variable Temperature Range: 500 – 600 °C Pistol Style , Controller Section , Arduino Uno With Replaceable Ic , Arduino Mega, Original Made In Italy , Raspberry Pi Kit With Case And Connectors ( Rp 3 B+ Or Higher ) , Esp 8266 12E Board ( Node Mcu ) , Power Supply , Regulated Variable Dc Power Supply 0-24 V, Max 240W , Lipo Battery, 11.1V, 2200 Mah , Balanced Lipo Battery Charger , Sensor Section , Sensor Kit ( 47 Sensor Kit ) Compatible With Arduinodifferent Types Of Sensor In The Kit. - Compaitble With Arduino And Other Boards In The Lab , Pir Sensor Module Hc-Sr501 Pyroelectric Infrared Pir Motion Sensor Detector Module , Force Sensordimensions: - Overall Length: 2.375 - Overall Width: 0.75 - Sensing Diameter: 0.5 , Flex Sensorangle Displacement Measurement - Bends And Flexes Physically With Motion Device - Simple Construction - Low Profile - Flat Resistance: 25K Ohms - Resistance Tolerance: ±30% - Temperature Range: -35°C To +80°C - Bend Resistance Range: 45K To 125K Ohms - Power Rating : 0.50 Watts Continuous. 1 Watt Peak , Depth Sensor ( Intel Realsense D400 Series ) Dept Sensor Specifications: - Use Environment = Indoor / Outdoor - Depth Technology = Active Ir Stereo - Main Intel® Realsense™ Component = Intel® Realsense™ Vision Processor D4 - Intel® Realsense™ = Module D410 - Depth Field Of View ( Fov ) ( Horizontal × Vertical × Diagonal ) = 65°±2° X 40°±1° X 72°±2° - Depth Stream Output Resolution = Up To 1280 X 720 - Depth Stream Output Frame Rate = Up To 90 Fps - Minimum Depth Distance ( Min-Z ) = 0.3 M - Sensor Shutter Type = Rolling Shutter - Maximum Range = Approx. 10 Meters; Varies Depending On Calibration, Scene, And Lighting Condition - Rgb Sensor Resolution And Frame Rate = 1920 X 1080 At 30 Fps - Rgb Sensor Fov ( Horizontal X Vertical X Diagonal ) = 69.4° X 42.5° X 77° ( + / - 3° ) - Camera Dimension ( Length X Depth X Height ) = 99 Mm X 20 Mm X 23 Mm - Connectors = Usb-C* 3.1 Gen 1 - Mounting Mechanism - One 1 / 4-20 Unc Thread Mounting Point, Two M3 Thread Mounting Points Board Specifications: - Soc = Intel® Atom™ X5-Z8350 Processor ( 2M Cache, 1.44 Ghz Up To 1.92 Ghz ) Cpu With 64 Bit Architecture; Quad Core - Graphics = Intel® Hd 400 Graphics - Video & Audio = Hdmi* 1.4B I2s Audio Port - Camera Interface = Csi ( 4 Megapixel ) - Usb Support = 1X Usb 3.0 Otg; 4X Usb 2.0; 2X Usb 2.0 Pin Header ( 10 Pins In Total ) - Rtc = Yes - Power = 5V Dc-In @ 3A 5.5 / 2.1Mm Jack - Dimensions = 3.37 X 2.22 / 85.60 Mm × 56.5 Mm - Memory = 4Gb Ddr3l-1600 - Storage Capacity = 32Gb Emmc* - Display Interface = Dsi / Edp - Ethernet = 1X Gb Ethernet ( Full Speed ) Rj-45 - Expansion = 40 Pin General Purpose Bus, Supported By Altera Max V. Adc 8-Bit@188Ksos - Compatible Operating System = Ubuntu* 14.04 Or 16.04 - Certificate = Ce / Fcc Class A, Rohs Complaint, Microsoft* Azure* Certified , Camera Sensor Shield Module , - Length ( Mm ) = 50 Mm - Width ( Mm ) = 54 Mm - Height ( Mm ) = 25 - Front Two Screw Holes = 19Mm Apart / 0.75 - Back Two Screw Holes = 47Mm Apart / 1.85 - Weight ( Kg ) = 25 Gm ( Without Cable And Screw ) - Processor = Nxp Lpc4330, 204 Mhz, Dual-Core - Power Consumption = 140 Ma Typical - Shipment Weight = 0.045 Kg - Shipment Dimensions = 6 X 6 X 4 Cm , Peripheral Boards / Shields , Distribution Board / Extension Board , Lcd With Interfacing Board , Wi-Fi Shieldcompatible With Raspberry Pi And Arduino , Display ( Oled ) 1.3 Inch Min. 128*64 Oled Min , Sensehat Modulecompatible With Raspberry Pi And Can Measure Temp., Humidity, Accretion, Pressure And 3D Orientation Etc. With Led Matrix To Display Data , Electronic Actuator Control Section , Servo Motor Metal Gearedstall Torque: 9.4Kg / Cm ( 4.8V ) ; 11Kg / Cm ( 6.0V ) , Operating Speed: 0.19Sec / 60° ( 4.8V ) ; 0.15Sec / 60° ( 6.0V ) Operating Voltage: 4.8~ 6.6V, Gear Type: Metal Gear , Dc Motor With Gear 22 Rpmshaft Diameter 6Mm With M3 Thread Hole , Operating Voltage - 12 V, No Load Current - 100Ma, Full Load Current - 1.9 A, Stall Torque: 45Kg-Cm At Maximum Limited Stall Current Of 4 Amp , Geared Dc Motor 60 Rpm Shaft Diameter 6Mm With M3 Thread Hole , Operating Voltage - 12 V, No Load Current - 100Ma, Full Load Current - 1.9 A, Stall Torque: 35Kg-Cm At Maximum Limited Stall Current Of 4 Amp , Dc Motor With Gear 100 Rpm100 Rpm, Dimensions: Length - 90Mm, Motor Diameter - 27.5Mm, Shaft Diameter - 6Mm, Weight - 250 Gms, Operating Voltage - 12V, Voltage 12V; No Load Current - 100Ma, Full Load Current - 1.9 A, Stall Torque: 22Kg-Cm At Maximum Limited Stall Current Of 4 Amp. , Geared Dc Motor 200 Rpm200 Rpm, Dimensions: Length - 90Mm, Motor Diameter - 27.5Mm, Shaft Diameter - 6Mm, Weight - 250 Gms, Operating Voltage - 12 V, No Load Current - 100Ma, Full Load Current - 1.9 A, Stall Torque: 11Kg-Cm At Maximum Limited Stall Current Of 4 Amp , Dc Motor With Gear 300 Rpm 300 Rpm, Dimensions: Length - 90Mm, Motor Diameter - 27.5Mm, Shaft Diameter - 6Mm, Weight - 250 Gms, Operating Voltage - 12 V, No Load Current - 100Ma, Full Load Current - 1.9 A, Stall Torque: 8Kg-Cm At Maximum Limited Stall Current Of 4 Amp. , Dc Motor With Gear 600 Rpm 600 Rpm, Dimensions: Length - 90Mm, Motor Diameter - 27.5Mm, Shaft Diameter - 6Mm, Weight - 250 Gms, Operating Voltage - 12V, Voltage 12V, No Load Current - 100Ma, Full Load Current - 1.9 A, Stall Torque: 4Kg-Cm At Maximum Limited Stall Current Of 4 Amp. , 60 Rpm Dc Geared Motor With Encoderrated Torque ( Kg-Cm ) = 6.73 Kg-Cm, Rated Speed ( Rpm ) = 60 Rpm, Gear Ratio = 100:1, Gear Material = Metal, Encoder Output ( Ppr ) = 700 Ppr ( Single Channel Output ) , Input Voltage ( V ) = 12, Rated Current ( A ) = 0.9, Rated Power = 7 W, Motor Type = Brushed , Dc Motor Drive Board Input Voltage: 12V Dc, Can Drive 2 Dc Motors Supplying 2A To Each Motor, Standard Frc, Phoenix And Relimated Connectors For Reliable Connections Compatible With The Atmega Development Board , Relay Motor Driver Board 10 Amp ( 2 / 4 / 8 ) 12 Each Input Voltage: 12V Dc, Drive 1 Dc Motor On Both Directions And Can Supply Up To 10A Of Current, Standard Frc, Phoenix And Relimated Connectors For Reliable Connections, Reverse Polarity Protection ( Short Circuit Protection ) , Stepper Motor Drive Boardinput Voltage: 8V – 36V Dc, It Can Drive One Stepper Motor With 2A Per Coil, Maximum Output Current Is 4A, Micro-Step Resolutions Of Full, 1 / 2, 1 / 4, 1 / 8 And 1 / 16 , Stepper Motor, 1.8 Degree Step Anglestep Angle : 1.8 Degree, 4 Wire Stepper Motor, Holding Torque:~25Kgcm, Rated Voltage: 2.8Vdc, Rated Current: 1.68Amps Moment Permissible Toruqe : 50Kgcm Rated Speed: 300Rpm , Servo Motor Driver Board Input Voltage: 7V – 12V Dc, It Can Drive 4 Servo Motors Of Each 6V, Maximum Output Current Up To 16A, Compatible With All Development Boards , Communication Modules , Zigbee Moduletransmitter And Receiver Module, Easy To Mount , Sim Shield Sim900a Gsm Modem With Sma Antenna ( Gsm Module ) , Gps Shieldoperating Current = 15Ma, Sensitivity = 149Dbm @Acquisition & 167Dbm @Tracking, Micro-Sd Card Slot = Yes , Bluetooth Hc05 , Breadboard 500-700 Point , Switches On / Off And Push , Jumper Wire ( M-M, M-F, F-F ) 10 Bunch ( M-M ) ( Variable Length ) , 1Bunch ( M-F ) , 1 Bunch ( F-F ) ) , Digitl Oscilloscope For Signal Visualization ) 1 Quantity200mhz - Dual Channel - 2G / S Sampling Rate , Rfid Card Reader Module Compatible With Arduino ( 13.56Mhz ) With Rfid Tags Tags / Cards , Rfid Card Reader Module Compatible With Arduino ( 125Khz ) With Rfid Tags Tags / Cards , Function Generator For Pulse Generator , Basic Electronics Components , Transistors ( Bc547, 2N2222, 2N3904, 2N3906 ) , Diado ( 1N4001, 1N4148 ) , Timer Ic 555 , Digital Logic ( Nor, Or, And, Not, 4017 Etc. ) , Mechanical Technology Division , Wheels & Accessories Section , Plastic Omniwheel ( Dia-100 Mm ) Wheel Diameter – 100Mm, Dual Rim , Coupling For Omniwheel - Total Length: 52Mm - Bore Diameter: 6Mm - Bore Depth: 18Mm - Coupling Weight: 37Gms , Aluminum Wheelwheel Diameter – 100Mm, Wheel Width – 25Mm , Flange For High Torque Motormaterial Aluminium, Hole Dia 12Mm , Mecanum Wheel Set ( Dia-100 Mm ) Wheel Diameter – 100Mm , Aluminum Coupling - Mecanum Wheel- Outside Diamete - Inside Diameter: 6 Mm - Hole Pcd: 47.5 Mm - Dia Of Holes: 5 Mm X 6 Nos , Power Transmission Section , Lead Screw-Length 500 Mm With Mounted Ball Bearing And Shaft Coupling3 D Printer T8 Lead Screw-Length 500 Mm With Mounted Ball Bearing And Shaft Coupling , Spur Gearmaterial Plastic, Module1.5M, Hole Dia 6Mm, Od 40 Mm, Yellow In Colour , Worm Gearmaterial Plastic, Hole Dia 6Mm , Timing Belt Gt2 Timing Belt For Reprap, 3D Printer, Cnc, Robotics And Automations. Belt Type: Gt2, Width: 6Mm, Color: Black, Pitch: 2Mm, Length:1M; Material: Rubber, , Timing Pulley Gt2 Timing Pulley For Reprap, 3D Printer, Cnc, Robotics And Automations. Pulley Type: Gt2, Pitch 2Mm, Bore Dia: 5 Mm, Belt Width : 6Mm , Rackmaterial Plastic, Module1.5M, Length 125Mm , Pinion Material Plastic, Module1.5M, Hole Dia 6Mm, Od 60 Mm , Bearings Section , Round Linear Bearing Linear Motion Bearing Id13mm, Round Flange Type , Collared Ball Bearing Set Id 4Mm-10, Id 6Mm-10 , Joints ( 1 Inch Square Lego ) , Structural Material Section ( Aluminum, Acrylic Etc. ) , Aluminium Section Set To Build Mechanisms , Acrylic Sheet Setto Build Mechanisms , Gripper Section , Parallel Link Gripper- Gripping Size: 40Mm - Worm Gear Arrangement To Give Continuous Gripping Force - Actuator: High Torque Center Shaft Dc Motor - Operating Voltage: 12V - Material: Acrylic - Weight: 200G , Angular Gripper- Type Of Gripper = Angular - Opening = ?20Mm - Type - Pneumatic , Linear Guideways , Industrial Carriage- Linear Motion, Aluminium Block , Industrial Rail ( 1000 Mm ) Linear Motion, Aluminium Rail , Actuators , Linear Actuator - Linear Motion Actuator-Travel Lengh-400Mm Ball Screw-16Mm Diameter, 5Mm Lead Double Optical Axis Linear Guide Slide Stage C7 Horizontal Load Bearing Capacity Up To 50Kg With Dual Photoelectric Switch With Adjustable Position Along The Slide Can Accommodate Various Size Of Stepper And Servo Motors Sliding Table Bottom Plat Size ( Width *Height ) 89*61Mm , Linear Actuatoractuator Travel Length - 400Mm Ball Screw-16Mm Diameter, 5Mm Lead With Square Linear Rail Slide With Nema23 Stepper Motor , Tools & Instruments Division , Tools And Instruments , Mechanical Tool Kit- No-Load Speed : 0 To 2600 Rpm - Drilling Diameter: 10 Millimeters For Concrete And Masonry; 8 Millimeters For Steel; 20 Millimeters For Wood - Material: Ms And Plastic - Chuck Capacity : 1 To 10 Millimeters - Impact Rate : 0 To 41600 Bpm - 1 / 2 Inch Drill Spindle Connecting Thread - Power: 500 Watts ( Input ) And 250 Watts ( Output ) , Cordless Drill Machine- 24 Torque Clutch For Perfect Screw Driving Into A Variety Of Materials With Different Screws Sizes - Spring Loaded Slide Pack Battery System For Quick And Easy Battery Change And A More Secure Fit - Reverse Switch For Added Versatility - Variable Speed For Ultimate Finger Tip Control For All Drilling Applications - Voltage: 220 Volts, Capacity: Wood-25Mm, Steel-10Mm , Jigsaw Cutterpendulum Action For A Faster Cutting Action - Variable Speed For Better Control In Different Materials - Sightline Channel Allows The User To Follow The Line Of Cut More Easily , Miniature File Set Metal Needle File Set , Riveterriveter Of Different Diameter , Stanelyultimate Tool Kitor Similar242 Pcs Tool Kit , Lab Accessories , Component Organizer- 25 Compartment Component Organizer Organizer Cabinet Frame Material -Rolled Steel Small Part Organizer Drawer Should Be Transparent Plastic ( Hdps ) And Must Have 3-4 Compartments / Drawer Minimum Individual Drawer Size: L24*W12*H7 Cm , Mechanical Link And Motion Models , Mechanical Link And Different Motion Type Modelsmodels Of Different Type To Study The Different Mechanisms Used In Automation Industryincluding 4 Bar, 6Bar Link Mechanism Etc. , Miscellaneous , Tweezer Set Pack Of 5 Tweezers , 3Mm Leds Red Transparent Red , 3Mm Leds Blue Transparent Blue , Ti5mm Leds Red Transparent Red , 5Mm Leds Blue Transparent Blue , Ir Led 5Mm White Or Transparent White , Ir Photodiodes 5 Mm Round Head Infrared Receiver Photodiodes Ir Diode , 0.1Uf 40V Electrolytic Capacitor Electrolytic Capacitor , 1Uf 40V Electrolytic Capacitor 1Uf 40V Electrolytic Capacitor , 10Uf 40V Electrolytic Capacitor 10Uf 40V Electrolytic Capacitor , 3.3Nf Ceramic Capacitor Ceramic Capacitor , 0.1Uf Ceramic Capacitor Ceramic Capacitor , 1Uf Ceramic Capacitor Ceramic Capacitor , Resistor 68 Ohm 1 / 4 Watt Carbon Film Resistor Cfr , Resistor 100 Ohm 1 / 4 Watt Carbon Film Resistor Cfr , Resistor 220 Ohm 1 / 4 Watt Carbon Film Resistor Cfr , Resistor 270 1 / 4 Watt Carbon Film Resistor Cfr , Resistor 1K 1 / 4 Watt Carbon Film Resistor Cfr , Resistor 2.2K Resistor 2.2K Ohm Cfr , Resistor 3.3K 1 / 4 Watt Carbon Film Resistor Cfr , Resistor 4.7K 1 / 4 Watt Carbon Film Resistor Cfr , Resistor 10K 1 / 4 Watt Carbon Film Resistor Cfr , Resistor 22K 1 / 4 Watt Carbon Film Resistor Cfr , Resistor 33K 1 / 4 Watt Carbon Film Resistor Cfr , Resistor 1M 1 / 4 Watt Carbon Film Resistor Cfr , Smd Resistor 68 Ohm Smd 1206 Package , Smd Resistor 100 Ohm Smd 1206 Package , Smd Resistor 220 Ohm Smd 1206 Package , Smd Resistor 270 Smd 1206 Package , Smd Resistor 1K Smd 1206 Package , Smd Resistor 2.2K Smd 1206 Package , Smd Resistor 3.3K Smd 1206 Package , Smd Resistor 4.7K Smd 1206 Package , Smd Resistor 10K Smd 1206 Package , Smd Resistor 22K Smd 1206 Package , Smd Resistor 33K Smd 1206 Package , Smd Resistor 1M Smd 1206 Package , Joystick Pots 1K Ohm + Cap 1K Ohm Potentiometer + Cap , Power Resistor 6E8, 5 Watt Power Rating: 5W ; Resistance Range: 0.1E To 22M ( E12-Series ) ; Operating Temperature Range: -55°C To +155°C ; Tolerance: 5% ; Max. Operating Voltage: 250V , Power Resistor 2E2, 5 Watt , Variable Potentiometer 10K Pot Package 3386 10K Single-Turn 10Mm Square Top Adjust Trimming Potentiometer Power Rating: 500Mw , Transistor Bc 547 Bc547 - Npn Transistor , Crystal 12Mhz ( Half Size ) Quartz Crystal For Microcontroller 12 Mhz ( Half Size ) , Crystal 16Mhz ( Half Size ) Quartz Crystal For Microcontroller 16 Mhz ( Half Size ) , Crystal For Dtmf Decoder 3.579547 Mhz Quartz Crystal For Microcontroller 3.57 Mhz ( Half Size ) , Four Leg Reset Switch Single Pole Single Throw Switch Rated Upto 50 Ma , Ic 7805 Smd D Pack Smd To-252 , Ic 7805 To220 To-220 , Ic 7806 To220 To-220 , Ic 7809 To220 To-220 , Mosfet Ics To-220 Package , General Purpose Boards 75 X 76 Holes ( 200Mm * 200Mm ) , Diodes 1N4007 1N4007 - General Purpose Rectifier Diode , Slider Switches R / A Right Angle Mini Slide Switch ( Pcb Spdt ) - Sm1 Type , Slider Switches Normal Straight Mini Slide Switch ( Pcb Spdt ) - Sm1 Type , Anchor Switches Current - 6A ; Voltage - 240V , Push Switches ( Astable ) Ds-314 Round Button Momentary Switch Normally Open Ac 250V 3A ( Opening 10Mm ) , Push Auto Switch ( Bistable ) Push Auto Switch ( Bistable ) , Dpdt Switches On-Off-On Switch 6-Pin Dpdt 3-Position Snap Boat Rocker 6A / 250V 10A / 125V , Limit Switches Current - 5A ; Voltage - 250V Ac , Single Pin Jumper Male To Female Female To Male Cable , Single Pin Jumper Female To Female Female To Female Cable , Relimated Connector Base ( White ) : 2 Pin White Relimate Base Male Pcb Mount , Relimated Connector Base ( White ) : 3 Pin White Relimate Base Male Pcb Mount , Relimated Connector Base ( White ) :4 Pin White Relimate Base Male Pcb Mount , Rrelimated Connector Base ( White ) :5 Pin White Relimate Base Male Pcb Mount , Relimated Connector Base ( White ) :6 Pin White Relimate Base Male Pcb Mount , Relimated Connector Base ( White ) :7 Pin White Relimate Base Male Pcb Mount , Relimated Connector Base ( White ) :8 Pin White Relimate Base Male Pcb Mount , Relimated Connector Both Sided ( White ) :2 Pin 2 Pin Relimated Cable , Relimated Connector Both Sided ( White ) :3 Pin3 Pin Relimated Cable , Relimated Connector Both Sided ( White ) :4 Pin 4 Pin Relimated Cable , Relimated Connector Both Sided ( White ) :5 Pin 5 Pin Relimated Cable , Relimated Connector Both Sided ( White ) :6 Pin6 Pin Relimated Cable , Relimated Connector Both Sided ( White ) :7 Pin 7 Pin Relimated Cable , Relimated Connector Both Sided ( White ) :8 Pin 8 Pin Relimated Cable , Pheonix Connector: 2 Pinbig 2 Pin Big Terminal Block Connector , Pheonix Connector: 2 Pin Small 2 Pin Small Terminal Block Connector , Frc Base : 10 Pin Normal 216 Series Box Header Straight 2.54 Mm 10 Pin , Frc Base : 10 Pin Right Angle 216-A Series Box Header Right Angle 2.54 Mm 10 Pin , Frc Base : 14Pin Normal 216 Series Box Header Straight 2.54 Mm 14 Pin , Frc Base : 14Pin Right Angle 216-A Series Box Header Right Angle 2.54 Mm 14 Pin , Frc Cable : 10 Pin ( In Meter ) Length= 1M ( For Ops: Purchase Bundle Of 100Ft ) , 14 Pin Frc Cable ( In Meter ) Length= 1M ( For Ops: Purchase Bundle Of 100Ft ) , 10 Pin Frc Header 201 Series Frc Female With Strain Relief 2.54 Mm 10 Pin , 14 Pin Frc Header 201 Series Frc Female With Strain Relief 2.54 Mm 14 Pin , Relay : 12 V Coil Jqc-3Fc ( T73 ) - 5 Pin Sugarcube 7 A , Male Burg Strip 40 X 1 Pin Style: Square No. Of Pins: 40 Pin Spacing: 2.54 Mm , Male Burg Strip 40 X 2 Pin Style: Square No. Of Pins: 80 Pin Spacing: 2.54 Mm , Female Burg Strip 40 X 1 Pin Style: Square No. Of Pins: 40 Pin Spacing: 2.54 Mm , Female Burg Strip 40 X 2 Pin Style: Square No. Of Pins: 80 Pin Spacing: 2.54 Mm , Ic Base : 6 Pin Dip Package , Ic Base : 14 Pin Dip Package , Ic Base : 16 Pin Dip Package , Ic Base : 20 Pin Dip Package , Ic Base : 28 Pin Narrow Ic Base For Atmega8 , Ic Base : 40 Pin Ic Base For Atmega16 , Heat Shrinks : 2 Mm In Meter Heat Shrink 2Mm In Meter , Heat Shrinks : 3Mm In Meter Heat Shrink 3Mm In Meter , Heat Shrinks : 5Mm In Meter Heat Shrink 5Mm In Meter , Heat Shrinks : 10Mm In Meter Heat Shrink 10Mm In Meter , T Connector For Batteries ( Male And Female Both ) T Connector ( Deans ) Male With Blue Black Wires , Tie ( Small, Medium And Large 2 Packets Each ) Tie ( Small, Medium And Large 2 Packets Each ) , Dual Tape Dual Tape 20Mm , Paper Tape Paper Tape ( Abro Tap ) 20Mm , Steel Grip Insulation Tape Steel Grip Insulation Tape , Transparent Tapes Transparent Tapes 1Inch , De-Solder Wick D-Sol-Wick 1M Long 2.5Mm Broad , Soldering Flux Wembeleys 15G , Heat Sink Small Pi49 20Mm , Heat Sink Big Pi48 25Mm , Motor Wire Blue ( Bundle Of 90 M ) Wire For Motors And Connectors , Motor Wire Black ( Bundle Of 90 M ) Wire For Motors And Connectors , Single Stranded Wire ( Bundle ) Single Stranded Wire

Refer document

Refer document

Refer document

Name of Work: For Setting up of Mechatronics and IoT Lab in DFT Department at NIFT Campus

Sl. No.	Item Description
1	Electronics Technology Division
2	Soldering SectionAdvanced Soldering StationSoldering Iron 15-30W 220V Digital temperature control with tip set, stand and tip wiper)Soldering Wire Reel (0.5 Kg) 60/40, 22 Guage Soldering Wire with Internal FluxWire Stripper Wire stripper/cutter Awg12-22, Size 6 inchWire NipperDigital MultimeterDC Voltage Range (Volts): 200mV - 600V, AC Voltage Range (Volts): 2V - 600V, DC Current Range (Amp): 200µA - 10A, AC Current Range (Amp): 200µA - 10A, Resistance Range (Ohm): 200O - 20Mohm, Continuity, Diode Checking, Data Hold3rd Hand with magnifying glass with light Anti-static Mat Size: 2 x 4 feet, Thickness: 3mm, 2 grounding chords, 5 wrist strap Desolder Pump Cutter Blade with holder
3	Heat Gun~230V, 1800 Watts, Variable Temperature range: 500 – 600 °C Pistol Style
4	Controller Section
5	Arduino UNO with replaceable IC
6	Arduino MEGA, Original Made in Italy
7	Raspberry Pi Kit with case and connectors (RP 3 B+ or higher)
8	ESP 8266 12E Board (node MCU)
9	Power supply
10	Regulated Variable DC Power Supply 0-24 V, Max 240W
11	Lipo battery, 11.1V, 2200 mAh
12	Balanced Lipo Battery Charger
13	Sensor Section
14	Sensor Kit (47 sensor kit) compatible with ArduinoDifferent types of sensor in the kit. - Compaitble with Arduino and other boards in the lab
15	PIR sensor Module Hc-Sr501 Pyroelectric Infrared Pir Motion Sensor Detector Module
16	Force SensorDimensions: - Overall length: 2.375" - Overall width: 0.75" - Sensing diameter: 0.5"
17	Flex SensorAngle Displacement Measurement - Bends and Flexes physically with motion device - Simple Construction - Low Profile - Flat Resistance: 25K Ohms - Resistance Tolerance: ±30% - Temperature Range: -35°C to +80°C - Bend Resistance Range: 45K to 125K Ohms - Power Rating : 0.50 Watts continuous. 1 Watt Peak
18	Depth Sensor (Intel Realsense D400 Series) Dept sensor specifications: - Use Environment = Indoor/Outdoor - Depth Technology = Active IR stereo - Main Intel® RealSense™ component = Intel® RealSense™ Vision Processor D4 - Intel® RealSense™ = module D410 - Depth Field of View (FOV) (Horizontal × Vertical × Diagonal) = 65°±2° x 40°±1° x 72°±2° - Depth Stream Output Resolution = Up to 1280 x 720 - Depth Stream Output Frame Rate = Up to 90 fps - Minimum Depth Distance (Min-Z) = 0.3 m - Sensor Shutter Type = Rolling Shutter - Maximum Range = Approx. 10 meters; Varies depending on calibration, scene, and lighting condition - RGB Sensor Resolution and Frame Rate = 1920 x 1080 at 30 fps - RGB Sensor FOV (Horizontal x Vertical x Diagonal) = 69.4° x 42.5° x 77° (+/- 3°) - Camera Dimension (Length x Depth x Height) = 99 mm x 20 mm x 23 mm - Connectors = USB-C* 3.1 Gen 1 - Mounting Mechanism - One 1/4-20 UNC thread mounting point, Two M3 thread mounting points Board specifications: - SoC = Intel® Atom™ x5-Z8350 Processor (2M Cache, 1.44 GHz up to 1.92 GHz) CPU with 64 bit architecture; Quad Core - Graphics = Intel® HD 400 Graphics - Video & Audio = HDMI* 1.4b i2S audio port - Camera Interface = CSI (4 Megapixel) - USB Support = 1x USB 3.0 OTG; 4x USB 2.0; 2x USB 2.0 pin header (10 pins in total) - RTC = Yes - Power = 5V DC-in @ 3A 5.5/2.1mm jack - Dimensions = 3.37" x 2.22" / 85.60 mm × 56.5 mm - Memory = 4GB DDR3L-1600 - Storage Capacity = 32GB eMMC* - Display Interface = DSI/eDP - Ethernet = 1x Gb Ethernet (full speed) RJ-45 - Expansion = 40 pin General Purpose bus, supported by Altera Max V. ADC 8-bit@188ksos - Compatible Operating System = Ubuntu* 14.04 or 16.04 - Certificate = CE/FCC Class A, RoHS complaint, Microsoft* Azure* certified
19	Camera Sensor Shield Module
20	- Length (mm) = 50 mm - Width (mm) = 54 mm - Height (mm) = 25 - Front two screw holes = 19mm apart / 0.75" - Back two screw holes = 47mm apart / 1.85" - Weight (Kg) = 25 gm (Without Cable and Screw) - Processor = NXP LPC4330, 204 MHz, dual-core - Power Consumption = 140 mA typical - Shipment Weight = 0.045 kg - Shipment Dimensions = 6 x 6 x 4 cm
21	Peripheral Boards/ Shields
22	Distribution board/ Extension Board
23	LCD with Interfacing Board
24	Wi-Fi ShieldCompatible with Raspberry Pi and Arduino
25	Display (OLed) 1.3 Inch min. 128*64 OLED min
26	SenseHat moduleCompatible with Raspberry Pi and can measure temp., humidity, accretion, pressure and 3D orientation etc. with LED matrix to display data
27	Electronic Actuator Control Section
28	Servo Motor metal gearedStall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v), Operating speed: 0.19sec/60° (4.8v); 0.15sec/60° (6.0v) Operating voltage: 4.8~ 6.6v, Gear Type: Metal gear
29	DC motor with Gear 22 RPMShaft diameter 6mm with M3 thread hole , Operating Voltage - 12 V, No load current - 100mA, Full load current - 1.9 A, Stall torque: 45Kg-cm at maximum limited stall current of 4 Amp
30	Geared DC motor 60 RPM Shaft diameter 6mm with M3 thread hole , Operating Voltage - 12 V, No load current - 100mA, Full load current - 1.9 A, Stall torque: 35Kg-cm at maximum limited stall current of 4 Amp
31	DC motor with Gear 100 RPM100 RPM, Dimensions: Length - 90mm, Motor Diameter - 27.5mm, Shaft diameter - 6mm, Weight - 250 gms, Operating Voltage - 12V, Voltage 12v; no load current - 100mA, Full load current - 1.9 A, Stall torque: 22Kg-cm at maximum limited stall current of 4 Amp.
32	Geared DC motor 200 RPM200 RPM, Dimensions: Length - 90mm, Motor Diameter - 27.5mm, Shaft diameter - 6mm, Weight - 250 gms, Operating Voltage - 12 V, No load current - 100mA, Full load current - 1.9 A, Stall torque: 11Kg-cm at maximum limited stall current of 4 Amp
33	DC motor with Gear 300 RPM 300 RPM, Dimensions: Length - 90mm, Motor Diameter - 27.5mm, Shaft diameter - 6mm, Weight - 250 gms, Operating Voltage - 12 V, No load current - 100mA, Full load current - 1.9 A, Stall torque: 8Kg-cm at maximum limited stall current of 4 Amp.
34	DC motor with Gear 600 RPM 600 RPM, Dimensions: Length - 90mm, Motor Diameter - 27.5mm, Shaft diameter - 6mm, Weight - 250 gms, Operating Voltage - 12V, Voltage 12V, No load current - 100mA, Full load current - 1.9 A, Stall torque: 4Kg-cm at maximum limited stall current of 4 Amp.
35	60 RPM DC geared motor with encoderRated Torque(kg-cm) = 6.73 kg-cm, Rated Speed(RPM) = 60 RPM, Gear Ratio = 100:1, Gear Material = Metal, Encoder Output(PPR) = 700 PPR(single channel output), Input Voltage (V) = 12, Rated Current(A) = 0.9, Rated Power = 7 W, Motor Type = Brushed
36	DC Motor Drive Board Input Voltage: 12V DC, can drive 2 DC motors supplying 2A to each motor, Standard FRC, Phoenix and Relimated connectors for reliable connections compatible with the atmega development board
37	Relay Motor Driver Board 10 amp (2/4/8) 12 each Input Voltage: 12V DC, drive 1 DC motor on both directions and can supply up to 10A of current, Standard FRC, Phoenix and Relimated connectors for reliable connections, Reverse polarity protection (Short Circuit Protection)
38	Stepper Motor Drive BoardInput voltage: 8V – 36V DC, It can drive one stepper motor with 2A per coil, Maximum output current is 4A, Micro-step resolutions of full,1/2,1/4,1/8 and 1/16
39	Stepper Motor, 1.8 degree step angleStep Angle : 1.8 Degree, 4 wire stepper motor, Holding Torque:~25Kgcm, Rated Voltage: 2.8VDC, Rated Current: 1.68Amps Moment permissible Toruqe : 50Kgcm Rated Speed: 300RPM
40	Servo motor driver board Input Voltage: 7V – 12V DC, It can drive 4 Servo motors of each 6V, Maximum output current up to 16A, Compatible with all development boards
41	Communication Modules
42	Zigbee moduletransmitter and receiver module, Easy to mount
43	SIM Shield SIM900A GSM Modem With SMA Antenna (GSM Module)
44	GPS ShieldOperating Current = 15mA, Sensitivity = 149dBm @Acquisition & 167dBm @Tracking, Micro-SD Card Slot = Yes
45	Bluetooth HC05
46	Breadboard 500-700 point
47	Switches on/Off and Push
48	Jumper wire (M-M, M-F, F-F)10 Bunch (M-M) (variable length), 1Bunch (M-F), 1 Bunch (F-F))
49	Digitl Oscilloscope for Signal Visualization) 1 quantity200Mhz - Dual channel - 2G/s sampling rate
50	RFID Card Reader Module compatible with Arduino (13.56MHz) with RFID Tags tags/Cards
51	RFID Card Reader Module compatible with Arduino (125KHz) with RFID Tags tags/Cards
52	Function Generator for Pulse Generator
53	Basic Electronics components
54	Transistors (BC547, 2N2222, 2N3904, 2N3906)
55	Diado (1N4001, 1N4148)
56	Timer IC 555
57	Digital Logic (NOR, OR, AND, NOT, 4017 etc.)
58	Mechanical Technology Division
59	Wheels & accessories Section
60	Plastic omniwheel (dia-100 mm) Wheel Diameter – 100mm, Dual rim
61	Coupling for omniwheel - Total Length: 52mm - Bore diameter: 6mm - Bore depth: 18mm - Coupling weight: 37gms
62	Aluminum wheelWheel Diameter – 100mm, Wheel Width – 25mm
63	Flange for High Torque MotorMaterial aluminium, Hole Dia 12mm
64	Mecanum wheel set (Dia-100 mm)Wheel Diameter – 100mm
65	Aluminum coupling - Mecanum wheel- Outside diamete - Inside diameter: 6 mm - Hole PCD: 47.5 mm - Dia of Holes: 5 mm x 6 nos
66	Power transmission Section
67	Lead Screw-Length 500 mm with mounted ball bearing and shaft coupling3 D printer T8 Lead Screw-Length 500 mm with mounted ball bearing and shaft coupling
68	Spur gearmaterial plastic, Module1.5m, Hole dia 6mm, OD 40 mm, Yellow in colour
69	Worm gearmaterial plastic, Hole dia 6mm
70	Timing Belt GT2 Timing Belt for RepRap, 3D Printer, CNC, Robotics and Automations. Belt Type: GT2, Width: 6mm, Color: Black, Pitch: 2mm, Length:1m; Material: Rubber,
71	Timing pulley GT2 Timing Pulley for RepRap, 3D Printer, CNC, Robotics and Automations. Pulley Type: GT2, Pitch 2mm, Bore dia: 5 mm, Belt Width : 6mm
72	Rackmaterial plastic, Module1.5m, length 125mm
73	Pinion material plastic, Module1.5m, Hole dia 6mm, OD 60 mm
74	Bearings Section
75	Round linear bearing Linear motion bearing ID13mm, round flange type
76	Collared Ball bearing Set ID 4mm-10, ID 6mm-10
77	Joints (1 inch square Lego)
78	Structural material Section(Aluminum, Acrylic etc.)
79	Aluminium Section Set To Build mechanisms
80	Acrylic sheet setTo Build mechanisms
81	Gripper Section
82	Parallel link Gripper- Gripping size: 40mm - Worm gear arrangement to give continuous gripping force - Actuator: High torque center shaft DC motor - Operating voltage: 12V - Material: Acrylic - Weight: 200g
83	Angular Gripper- Type of gripper = Angular - Opening = ?20mm - Type - Pneumatic
84	Linear Guideways
85	Industrial Carriage- Linear motion, aluminium block
86	Industrial Rail (1000 mm)Linear motion, aluminium rail
87	Actuators
88	Linear Actuator - Linear Motion Actuator-Travel lengh-400mm Ball screw-16mm diameter,5mm lead Double optical axis linear guide slide stage C7 Horizontal load bearing capacity up to 50kg With dual photoelectric switch with adjustable position along the slide Can accommodate various size of stepper and servo motors Sliding table bottom plat size (Width *Height)89*61mm
89	Linear ActuatorActuator Travel Length - 400mm Ball screw-16mm Diameter,5mm Lead with square Linear Rail Slide with NEMA23 Stepper Motor
90	Tools & Instruments Division
91	Tools and Instruments
92	Mechanical Tool Kit- No-load speed : 0 to 2600 rpm - Drilling diameter: 10 millimeters for concrete and masonry; 8 millimeters for steel; 20 millimeters for wood - Material: MS and Plastic - Chuck capacity : 1 to 10 millimeters - Impact rate : 0 to 41600 bpm - 1/2 inch drill spindle connecting thread - Power: 500 watts (Input) and 250 watts (Output)
93	Cordless Drill Machine- 24 torque clutch for perfect screw driving into a variety of materials with different screws sizes - Spring loaded slide pack battery system for quick and easy battery change and a more secure fit - Reverse switch for added versatility - Variable speed for ultimate finger tip control for all drilling applications - Voltage: 220 volts, Capacity: Wood-25mm, steel-10mm
94	Jigsaw cutterPendulum action for a faster cutting action - Variable speed for better control in different materials - Sightline channel allows the user to follow the line of cut more easily
95	Miniature File Set Metal Needle file set
96	RiveterRiveter of different diameter
97	StanelyUltimate Tool Kitor similar242 Pcs tool kit
98	Lab Accessories
99	Component Organizer- 25 compartment Component organizer Organizer cabinet frame material -Rolled Steel Small part organizer drawer Should be transparent plastic (HDPS) and must have 3-4 compartments/drawer Minimum individual Drawer size: L24*W12*H7 cm
100	Mechanical Link and Motion models
101	Mechanical Link and different Motion type modelsModels of different type to study the different mechanisms used in automation industryincluding 4 bar, 6bar link mechanism etc.
102	Miscellaneous
103	Tweezer Set Pack of 5 tweezers
104	3mm LEDs red Transparent red
105	3mm LEDs blue Transparent blue
106	Ti5mm LEDs RED Transparent red
107	5mm LEDs blue Transparent blue
108	IR LED 5mm white or transparent white
109	IR photodiodes 5 mm Round Head Infrared Receiver Photodiodes IR Diode
110	0.1uF 40V electrolytic capacitor Electrolytic Capacitor
111	1uF 40V electrolytic capacitor 1uF 40V electrolytic capacitor
112	10uF 40V electrolytic capacitor 10uF 40V electrolytic capacitor
113	3.3nF ceramic capacitor Ceramic Capacitor
114	0.1uF ceramic capacitor Ceramic Capacitor
115	1uF ceramic capacitor Ceramic Capacitor
116	Resistor 68 ohm 1/4 watt Carbon Film Resistor CFR
117	Resistor 100 ohm 1/4 watt Carbon Film Resistor CFR
118	Resistor 220 ohm 1/4 watt Carbon Film Resistor CFR
119	Resistor 270 1/4 watt Carbon Film Resistor CFR
120	Resistor 1k 1/4 watt Carbon Film Resistor CFR
121	Resistor 2.2k Resistor 2.2k ohm CFR
122	Resistor 3.3k 1/4 watt Carbon Film Resistor CFR
123	Resistor 4.7k 1/4 watt Carbon Film Resistor CFR
124	Resistor 10k 1/4 watt Carbon Film Resistor CFR
125	Resistor 22k 1/4 watt Carbon Film Resistor CFR
126	Resistor 33k 1/4 watt Carbon Film Resistor CFR
127	Resistor 1M 1/4 watt Carbon Film Resistor CFR
128	smd Resistor 68 ohm SMD 1206 package
129	smd Resistor 100 ohm SMD 1206 package
130	smd Resistor 220 ohm SMD 1206 package
131	smd Resistor 270 SMD 1206 package
132	smd Resistor 1k SMD 1206 package
133	smd Resistor 2.2k SMD 1206 package
134	smd Resistor 3.3k SMD 1206 package
135	smd Resistor 4.7k SMD 1206 package
136	smd Resistor 10k SMD 1206 package
137	smd Resistor 22k SMD 1206 package
138	smd Resistor 33k SMD 1206 package
139	smd Resistor 1M SMD 1206 package
140	Joystick Pots 1k ohm + cap 1k ohm Potentiometer + Cap
141	Power Resistor 6E8, 5 WATT Power rating: 5W ; Resistance range: 0.1E to 22M (E12-series) ; Operating temperature range: -55°C to +155°C ; Tolerance: 5% ; Max. operating voltage: 250V
142	Power Resistor 2E2, 5 WATT
143	Variable Potentiometer 10k POT PACKAGE 3386 10K Single-Turn 10mm Square Top Adjust Trimming Potentiometer Power Rating: 500mW
144	Transistor BC 547 BC547 - NPN Transistor
145	Crystal 12MHz (HALF SIZE) Quartz Crystal for Microcontroller 12 MHz(Half Size)
146	Crystal 16MHz (HALF SIZE) Quartz Crystal for Microcontroller 16 MHz(Half Size)
147	Crystal for DTMF decoder 3.579547 Mhz Quartz Crystal for Microcontroller 3.57 MHz(Half Size)
148	Four leg Reset Switch Single Pole Single Throw Switch Rated upto 50 mA
149	IC 7805 smd "D" pack smd TO-252
150	IC 7805 TO220 TO-220
151	IC 7806 TO220 TO-220
152	IC 7809 TO220 TO-220
153	MOSFET Ics TO-220 package
154	General Purpose Boards 75 x 76 holes (200mm * 200mm)
155	Diodes 1N4007 1N4007 - General Purpose Rectifier Diode
156	Slider switches R/A Right Angle Mini Slide Switch (PCB SPDT) - SM1 Type
157	Slider switches Normal Straight Mini Slide Switch (PCB SPDT) - SM1 Type
158	Anchor switches Current - 6A ; Voltage - 240V
159	Push switches (astable) DS-314 Round Button Momentary Switch Normally Open AC 250V 3A (Opening 10mm)
160	Push Auto switch (bistable) Push Auto Switch(Bistable)
161	DPDT switches ON-OFF-ON Switch 6-Pin DPDT 3-Position Snap Boat Rocker 6A/250V 10A/125V
162	Limit switches Current - 5A ; Voltage - 250V AC
163	Single pin jumper Male to Female female to male cable
164	Single pin jumper Female to Female female to female cable
165	Relimated Connector Base (white): 2 pin white relimate base male pcb mount
166	Relimated Connector Base (white): 3 pin white relimate base male pcb mount
167	Relimated Connector Base (white):4 pin white relimate base male pcb mount
168	RRelimated Connector Base (white):5 pin white relimate base male pcb mount
169	Relimated Connector Base (white):6 pin white relimate base male pcb mount
170	Relimated Connector Base (white):7 pin white relimate base male pcb mount
171	Relimated Connector Base (white):8 pin white relimate base male pcb mount
172	Relimated Connector both sided (white):2 pin 2 pin relimated cable
173	Relimated Connector both sided (white):3 pin3 pin relimated cable
174	Relimated Connector both sided (white):4 pin 4 pin relimated cable
175	Relimated Connector both sided (white):5 pin 5 pin relimated cable
176	Relimated Connector both sided (white):6 pin6 pin relimated cable
177	Relimated Connector both sided (white):7 pin 7 pin relimated cable
178	Relimated Connector both sided (white):8 pin 8 pin relimated cable
179	Pheonix connector: 2 pinBig 2 pin big Terminal Block Connector
180	Pheonix connector: 2 pin Small 2 pin small Terminal Block Connector
181	FRC base : 10 pin normal 216 Series Box Header Straight 2.54 mm 10 pin
182	FRC base : 10 pin RIGHT ANGLE 216-A Series Box Header Right Angle 2.54 mm 10 pin
183	FRC base : 14pin normal 216 Series Box Header Straight 2.54 mm 14 pin
184	FRC base : 14pin Right Angle 216-A Series Box Header Right Angle 2.54 mm 14 pin
185	FRC cable : 10 pin ( in meter) length= 1m(For Ops: purchase bundle of 100ft)
186	14 pin FRC cable (in meter) length= 1m(For Ops: purchase bundle of 100ft)
187	10 pin FRC header 201 Series FRC Female with Strain Relief 2.54 mm 10 pin
188	14 pin FRC header 201 Series FRC Female with Strain Relief 2.54 mm 14 pin
189	Relay : 12 V Coil JQC-3FC(T73) - 5 pin sugarcube 7 A
190	Male burg strip 40 x 1 Pin Style: Square No. of pins: 40 Pin Spacing: 2.54 mm
191	Male burg strip 40 x 2 Pin Style: Square No. of pins: 80 Pin Spacing: 2.54 mm
192	Female Burg Strip 40 x 1 Pin Style: Square No. of pins: 40 Pin Spacing: 2.54 mm
193	Female burg Strip 40 x 2 Pin Style: Square No. of pins: 80 Pin Spacing: 2.54 mm
194	IC base : 6 pin DIP Package
195	IC base : 14 pin DIP Package
196	IC base : 16 pin DIP Package
197	IC base : 20 pin DIP Package
198	IC base : 28 pin Narrow IC Base For Atmega8
199	IC base : 40 pin IC Base for Atmega16
200	Heat Shrinks : 2 mm in meter Heat shrink 2mm in meter
201	Heat Shrinks : 3mm in meter Heat shrink 3mm in meter
202	Heat Shrinks : 5mm in meter Heat shrink 5mm in meter
203	Heat Shrinks : 10mm in meter Heat shrink 10mm in meter
204	T connector for batteries (Male and Female Both)T connector (Deans) male with blue black wires
205	Tie (Small, medium and large 2 packets each) Tie (Small, medium and large 2 packets each)
206	Dual tape Dual tape 20mm
207	Paper Tape Paper Tape (abro tap) 20mm
208	Steel grip Insulation Tape Steel grip Insulation Tape
209	Transparent tapes Transparent tapes 1inch
210	De-solder Wick D-Sol-Wick 1m long 2.5mm broad
211	Soldering Flux Wembeley"s 15g
212	Heat Sink Small PI49 20mm
213	Heat Sink Big PI48 25mm
214	Motor Wire blue (Bundle of 90 m) Wire for motors and connectors
215	Motor Wire black (Bundle of 90 m) Wire for motors and connectors
216	Single Stranded wire (Bundle) Single stranded wire