Animal Resources Development Department has published Ancillary Works, Services And Equipments For Setting Up Of Laboratory Animal Breeding At State Livestock Farm Complex, At Kalyani, Dist. Nadia - 741235.-2 Providing And Filling In The Foundation With Sand Of Approvedqualityincludingwatering, . Submission Date for this Tender is 22-01-2022. Prime Mover Tenders in West Bengal. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | D E S C R I P T I O N |
2 | Providingandfillinginthefoundationwithsandofapprovedqualityincludingwatering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer) |
3 | Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cmthick including hand packing and compacting etc. complete. |
4 | ProvidingwaterproofbeddingforflooringofBath andWC 25mmthickin C.M.1:3including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. |
5 | ProvidingwaterproofplasterinW.C.andbath 12mmthickfordadoincementmortar1:3withneat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles) (As directed by Engineer in Charge) |
6 | Providing waterproofing in W.C. and bath including brick bat coba in all position including providingand laying12mmbeddingincementmortor1:3onverginconcreteslabwith waterproofing compound @ 1Kilogram/perbagofcementlayingbrickbatcobaof requiredthicknessincm1:5 with waterproofing compound1Kilogram/bag ofcement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48hoursbypondtestandcoveringtenyears"guaranteeonrequisitestamppaperincludingcuringetc. complete. |
7 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.Cmembers andbrickwork,ofapprovedqualityincludingfixing meshinpositionby necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. |
8 | Providing and applying gypsum plaster (with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/ or on newly brick surface (Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. |
9 | Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid ongrid systems withT - sectionflangescolorwhitehavingrotarystitchingontheMainRunner.Providing andFixing of GI Lay in Plainmetal ceilingconsistingof600x600mmLayintilesofpre coated galvanized steel in 0.5 mm thicknessinGlobalwhite colortile to be laid ongrid systems. |
10 | Providing and constructing R.C.C. underground storage tank of M-25 mix cement concrete R.C.C. floor slab, walls etc, including excavation M-10 mix P.C.C., form work, vibrating, water curing etc.including M.S. rungs heavy type mosquittoproof covers, inlets and outlets, oveflow pipe including water proofing plaster of 1:2 mix cement and sand mortar to the inside surface and wata at the junction of walls and floor etc. and sand faced plaster of 1:4 mix in two coats from outside surfaces and top finish with 1:4 cement plaster as per working designs and drwawings including testing of water leakages including water proofing etc. complete. |
11 | Borewell |
12 | Depth Approx. 350 Rft, with 1.5 HP submersibe motor |
13 | Road Work |
14 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingthe excavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingas directed,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
15 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thickincluding hand packing and compacting etc. complete. |
16 | Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50m, not less than 97% of standard Proctor density after laying them in layers of 20cm. To 30cm. With Power roller. |
17 | Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/ crushed sand VSI grade finely washed etc.), compacting and proper embedding/ laying of interlocking paver blocks in to the fine aggregate (natural sand/ crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/ crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/ crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern. |
18 | Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter (as per IRC 861983) embedded 125 mm below ground level over M-10 PCC finished neatly with C.M.1:2, setting the same in C.M.1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge.Using Concrete Batching and Mixing Plant |
19 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete |
20 | Providing and applying one coat of flat oil paint of approved colour and shade to internal/ external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primercoat) etc. complete. |
21 | Fabrication of Shed in MS structure for covering the terrace of the building |
22 | Area Of Building 196 ft X 68 ft |
23 | Slope 2 ft towords Back Side |
24 | Height Front 16 ft And Back 14 Ft Top |
25 | Material Details :- |
26 | ISMC 100mmX50mm |
27 | M.S.Angle 35mmX5mm |
28 | M.S.Coil Pipe 100mmX100mmX2mm |
29 | M.S.Coil Pipe 40mmX80mmX2mm |
30 | M.S.Coil Pipe 40mmX40mmX2mm |
31 | M.S.Coil Pipe 40mmX80mmX1.6mm |
32 | M.S.Plate 450mmX250mmX10mm |
33 | Pre-Coated Sheet 0.50(Tata/ Jindal/ Essar) |
34 | Should cover the AHU & Chiller from top and back side |
35 | Laboratory animal caging system |
36 | IVC Caging system for Mice: |
37 | Each system comprises of: |
38 | Air handling unit with touch screen display, blower, velocity sensor, castor wheels, hose pipes, SS 304 body |
39 | Rack for holding mice ivc cage of capacity 48 cages, SS 304 with wheels, PSU rack valves, round main supply pipe, PSU common rail |
40 | Mice IVC Cage of PSU/High heat Polycarbonate with silicon gasket, water bottle, SS grill, polysulfone card holder, filter holder plate and locks |
41 | IVC Caging system for Rat |
42 | Each system comprises of: |
43 | Air handling unit with touch screen display, blower, velocity sensor, castor wheels, hose pipes, SS 304 Body |
44 | Rack for holding rat ivc cage of capacity 30 cages, SS 304 with wheels, PSU rack valves, round main supply pipe, PSU Common rail |
45 | Rat IVC Cage of PSU or High heat Polycarbonate with silicon gasket, water bottle, SS grill, Polysulfone Card holder, filter holder plate & locks |
46 | Mice conventional cages made of PP of size 29x22x14cm |
47 | with S.S. 304 grill and water bottle of 300ml of PP |
48 | Rack for holding mice PP Cages, made of SS 304 material |
49 | with wheels, sliding type, capacity 25 cages per rack |
50 | Rat conventional open type cages, made of PP |
51 | size 43x29x20cm, with SS 304 grill and water bottle of 300ml PP sqaure shape |
52 | Rack for holding rat PP Cages, made of SS 304 material |
53 | with wheels, sliding type, capacity 25 cages per rack |
54 | Rabbit inbuilt Polypropylene Cage trolley systen |
55 | Each system comprises of: |
56 | 6 cages per trolley |
57 | each trolley is fitted with P.P. trays with S.S. grill and SS excreta |
58 | tray with water bottle and food hopper |
59 | Rabbid breeding cages |
60 | Made of SS 304 Material |
61 | Cage size 900 x 600 x 450 mm (L x W x H) |
62 | With excreta tray, food hopper, water bottle |
63 | Trolley for holding rabbit breeding cages |
64 | made of SS 304 sqaure pipe |
65 | suitable for holding 3 rabbit breeding cages |
66 | fitted with castor wheels |
67 | Polypropylene Guinea pig cages |
68 | Made of PP tray and fitted with SS grill |
69 | Supplied with water bottle of 650ml |
70 | Size: 650mm (L) x 500 mm (W) x 280 mm (H) |
71 | Lid should have door on the top |
72 | Trolley for holding guinea pig cages: |
73 | Suitable for holding 9 guinea pig cages |
74 | made of SS 304 sqaure pipes, fitted with castor wheels |
75 | Sliding type trolley |
76 | Guinea Pig Pans |
77 | Pan Top Dimensions: 900 x 600 x 250 mm |
78 | Pan Floor Dimensions: 800 x 500 mm |
79 | Floor area: 4000 sq cm |
80 | Made of SS 304 material |
81 | Supplied with food hopper, water bottles |
82 | stackable type |
83 | Trolley for holding guinea pig pans |
84 | Made of SS 304 material |
85 | sliding type,suitable for holding 3 guinea pig pans |
86 | fitted with castor wheels |
87 | Hamster cages, P.P. with SS grill, water bottles |
88 | Trolley for holding hamster cages, 9 cages/ rack |
89 | ELECTRICAL |
90 | HVAC Panel |
91 | EB INCOMING:-1 800A 4P MDO ACB 36KA Microprocessor release with O/L,S/C protection, LSIG & U/V release lsig (SCHNEIDER/SIEMENS/ABB) -1 No, 800/5A Current Transformer Class-1, 15VA for Metering (KAPPA) - 3 Nos, Multifunction meter Digital Type 96*96 MM - 1No, Phase Indication Lamp (R,Y,B, 230V AC) (SCHNEIDER/SIEMENS/ABB)- 3 Nos. AUX Contactor 4NO+4NC, 230V AC - 1 Nos, 6A SP MCB 10KA (SCHNEIDER/SIEMENS/ABB) - 3 Nos,1000Amps TPN AL. BUS BAR Ics=Icu=35kA |
92 | VENTILATION PANEL |
93 | EB INCOMING:-1 160A 4Pole 36kA MCCB with microprocessor release- 1Nos. Rotary handle for 160A MCCB - 1Nos. Spreader for 200A 4P MCCB (SCHNEIDER/SIEMENS/ABB)-1 Sets, 160/5A Current Transformer Class-1, 15VA for Metering (KAPPA) - 3 Nos, Multifunction meter Digital Type 96*96 MM - 1No, Phase Indication Lamp (R,Y,B, 230V AC) (SCHNEIDER/SIEMENS/ABB)- 3 Nos. 6A SP MCB 10KA (SCHNEIDER/SIEMENS/ABB) - 3 Nos. |
94 | Busbar:- 200A TPN ALUMINIUM BUS BAR Ics=Icu=10KA |
95 | OUTGOING : 16A FP MCB 10KA (SCHNEIDER/SIEMENS/ABB) -07 NOS20A FP MCB 10KA (SCHNEIDER/SIEMENS/ABB) - 05 Nos, 20A FP MCB 10KA (SCHNEIDER/SIEMENS/ABB) - 06 Nos, 32A FP MCB 10KA (SCHNEIDER/SIEMENS/ABB) - 02 Nos, 40A FP MCB 10KA (SCHNEIDER/SIEMENS/ABB) - 01 Nos, |
96 | Cables Supply- cables shallbe 1.1KVgrade, aluminium or copper armouredof approvedmake as perfollowing sizes. |
97 | 4 core 04 sqmm XLPE Al. Ar.cable |
98 | 4 core 06 sqmm XLPE Al. Ar.cable |
99 | SITC of Cable Ducts with MS back box having depth of 75/100mm (similar to DB depth) collars for mounting trunk cover dressing tie bars @450mm distance with top powder coated (RAL- 7032) cover having knobs/key locks of dkeys. The MS Sheet shall be of 16 Gauge, for below mentioned width of Cable. (For DB"s Conduits & Wire Drops) |
100 | For Conduits & cable Drops to Panels & DB"s |
101 | 200MM |
102 | PPGI/PCGI Partition |
103 | 80 mm Double skin self supporting modular profile panel system made of 0.5 mm thick PPGI (RAl 9002) sheets on both sides with PUF as infill of density 40 kg/m3+/-2 Kg. 0.6 mm GI "W" Profiles for reinforcement along the periphery made air tight with Silicone sealant with base runner and Wall connecting |
104 | AHU & Accessories: |
105 | AHU & Accessories: AHU with heat recovery units with supply and exhaust filteration using 10+3 &0.3 filters, Approx 3000-3500CFM, supply side static 130mm & exhaust side 115mm, with plate heat exchangers |
106 | ElectricalFinned Tubular Heaters for the control of relative humidity in AC area. the Electric Tubular Heaters shall be made SS-304 , one Humidistat per bank, with humidistat Thermostat per bank, 6w to 13w: 26 |
107 | Tyrister controller for Heater Bank, 6W to 13W: 26 |
108 | VFD Drive control panel for AHU: 42 |
109 | Auto ON-OFF AHU VCD controller with wiring to avoide short cycle of supply Air and Return Air, supply VCD-22, return VCD- 22 |
110 | Variable frequency drive controls the speed of an AC motor by varying the frequency supplied to the motor, VFD chnged the speed if fillter clogging and give desired CFM to area. Suitable for VAHU for supply and exhaust side: 18 |
111 | Auto ON-OFF V-AHU VCD controller with wiring to avoide short cycle of supply Air and Return Air, supply VCD-9, return VCD- 9 |
112 | Air Cooled Type chiller Package Unit, 108-120Tr, Single/Multi Compressors as per above specification Actual Capacity – 108 TR @ 38.5°C Out side Condition Chilled Water In– 54°F/12.2°C Chilled Water Out – 44°F/6.67°C Chilled Water Flow–240 USGPM IKW/TR(Max)– 1.3 KW/TR |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail