Military Engineer Services-MES has published Special Repairs To Flooring, Asbestos Sheet, Wall Cladding, Ceiling Door, Window, Joinery And Sanitary Fittings With Tiling In Bldg No. T-19 & T-20 Or Living Of 1831 Lt Regt At Raspunja Under Ge ( Central ) Kolkata.. Submission Date for this Tender is 29-01-2022. Civil Work Tenders in KOLKATA West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Jan-2022 | CHANGE IN BIDDING DATE | Date | 22-01-2022 |
| 2 | 13-Jan-2022 | CHANGE IN BOQ | BOQ | 22-01-2022 |
| 3 | 22-Jan-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-01-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement ( corrugated ,semi corrugated sheets etc) sheets in roof coveringsincluding ridges complete all as specified and as directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 3 | Dismantling timber scantling 40 Sqcm and over in section for Unframed work complete all as specified and as directed. |
| 4 | Dismantling timber scantlingUnder 40 Sqcmin section for fillets, rails, post rafters, purlins etcfor Unframed work complete all as specified and as directed. |
| 5 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 6 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 7 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 8 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 9 | Taking down chowkats or frames, exe 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame)complete all as specified and directed. |
| 10 | Taking up or down steel tubing 15mm bore and connection complete all as specified and as directed. |
| 11 | Taking up or down steel tubing 20mm bore and connection complete all as specified and as directed. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 13 | Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 Cm thickness. (below or above ground level) complete all as specified and directed. |
| 14 | Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc.and getting out in soft / loosesoil. complete all as specified and directed. |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft / loose soil complete all as specified and directed. |
| 16 | Removing excavated material of soft / loose soil not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 17 | Material and LabourRCC Type B-1 (1:2:4 Using 20mm graded crushed stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified anddirected. |
| 18 | Material and Labour for plain cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) for embedding holdfast, bed block, copingcills, etcincluding necessary form work complete all as specified and directed. |
| 19 | Material and LabourBrick work with fly ash pulverized bricks of Class-A, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed |
| 20 | Material and LabourBrick work with fly ashPulverized bricks of Class-A, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed |
| 21 | Materials and Labour Formworkfor rough finished surfaces to the soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 22 | Supply and fix 35mm thick, Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 23 | Supply and fix 35mm thick 2nd class hard wood glazed & skeleton doorshutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24(a) complete all as specified and directed by Engr-in-Charge. |
| 24 | Supply and fix Solid PVC door frame of size 50X47mm made out of 5mm thick plain coloured PVC sheet reinforced with MS square tube fixed as per manufacturer instruction complete all as specified and directed. |
| 25 | Supply and FixFactory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 26 | Supply and fix aluminium anodised 1.50mm thick powder coated ,three track sliding window frame with shutters as per Drg no. CWE/KOL/TD-33 of section No. 1F-1F including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements etc. complete and glazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket and stainless steel wi\re cloth of 0.36mm nominal dia of wire fitted with screws and washer. The section of frame and shutter is as under complete all as specified and as directed:- Note:- Cost of wire cloth and glazing shall be measured and paid separately under relevant items of this schedule. |
| 27 | Supply and fix Powder coated aluminium ventilators with louvers and glazing including frame of section overall size of window 600mm x450mm with following specifications complete all as specified and as directed. (a) Aluminium frame of size 45mm x45mm x1.20mm (b) Rail and style 45mm x45mm x1.20mm Thick. (c ) 5.00 mm thick frosted glass. Note:- All ventilators and louvers member including fittings & fixtures shall deemed to be included in the rate quoted by the Tenderer. Opening size of ventilators and louvers shall be measured for payment. |
| 28 | Supply and fix 200mm Stainless steel barrel tower bolts of extruded section complete all as specified and as directed. |
| 29 | Supply and fix 100mm long butt hinges stainless steel complete all as directed. |
| 30 | Supply and fix100 mm Stainless steelhandles "D" typecomplete all as specified and as directed. |
| 31 | Supply and Fix 300mm Stainless steel sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 32 | Supply and fix stainless steel door stopper of suitable size complete all as dirceted by Enginneer-in-Charge. |
| 33 | Material and Labour for Mild steelframed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed. |
| 34 | Supply and fix in repairs Drappery rod made of electric resistance welded MS pipe of 21mm dia having a coating of corrugated virgin PVC extrusion and cover with ABS plastic complete all as specified and as directed. |
| 35 | Supply and fixclosed type stainless steel bracket for drappery rod fixed to wall with fixing arrangements complete all as directed by Engineer in Charge. |
| 36 | Supply and fixStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 37 | Supply and Fix Mild steel work as inRooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410W(GdeE-250) quality Bcomplete all as specified and as directed. |
| 38 | Supply and Fix Mild steel work as Rolled steel sections asincross beams, hip and jack rafters; purlins where connectedto common rafters and running rails and guides for sliding doors; fixedwithangle cleats or other connecting plates Confirming to Fe-290 , Gde E-165 complete all as specified and as directed. |
| 39 | Supply and Fix Mild steel work as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe-410W(GdeE-250) quality Bcomplete all as specified and as directed. |
| 40 | Supply and fix Miild steel screw bolts (machine made)diameter of neck 11mm to 18mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt 22.50mmto 30 mm long complete all as specified and directed. |
| 41 | Supply and fix 40mm bore Mild steel tubing, medium grade, fixed to wall or ceiling complete all as specified and as directed. |
| 42 | Supply and fix welded steel wire fabric of weight not more than 4 Kg/sqm fitted by nails complete all as specified and as directed. |
| 43 | Supply and fix TMT steel bars 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 44 | Supply and fix Pressed steel frames of size 105mm x60mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note:- Pressed steel frame shall be filled with PCC type C0 ( 1:3:6, using 12.5mm graded crushed stone aggregates) and cost ofsame shall deemed to be included in the rate quoted by the tenderer in this Item. |
| 45 | Supply and fix Pressed steel frames of size 125mm x60mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note:- Pressed steel frame shall be filled with PCC type C0 ( 1:3:6, using 12.5mm graded crushed stone aggregates) and cost ofsame shall deemed to be included in the rate quoted by the tenderer in this Item. |
| 46 | Supply and fix 4 mm thick suspended non asbestos fibre cement non asbestos building boards similarto E- board classic placed in the grid of size 605 x 605 mm with aluminium anodised angle/channel/Tee section fixed with screw duly suspended with 4 mm dia GI hanger fixed with GI hooks 4 mm dia and fastner as required at the site including two coats of acrylic distemper complete all as specified and directed by Engr-in-Charge . Details of section are as Under including taking down old unserviceable one:- (i) Aluminium angle 25mm x25mm x1.5mm thick. (ii) Aluminium Cross Tee 25mm x25mm x1.5mm thick. (iii) Aluminium main TEE 25mm x38mm x1.5 mm thick. |
| 47 | Supply and fix Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 48 | Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and ridge, fixed with self tapping screws complete all as specified and directed. |
| 49 | Material and Labour Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 Cm girthcomplete all as specified and directed. |
| 50 | Material and Labour for 75 mm thick,plain cement concrete1:3:6, type C-2 (using 40mm graded stone aggregate) as in paving and plinth proction laid in panels etc finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.Note:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 51 | Materials and Labour 100mm thick Plain cement concrete type B2 ( 1:2:4, using 40mm graded crushed stone aggregates) as in path / hard standing including finishing the top surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 52 | Material and Labour for 25 mm thick, plain cement concrete 1:2:4,type B0 (using 12.5 mm graded stone aggregate)as in sub base etccomplete all as specified and directed. |
| 53 | Materials and labour for non-skid, ceramic, joint free, colouredtiles 8 to 10 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in floors etc,set and jointedin neat cement slurry and jointed in white or coloured cement to matcht etc over 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 54 | Materials and labour for non-skid, ceramic, colouredtiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc,set and jointedin neat cement slurry and jointed in white or coloured cement to matcht etc over 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 55 | Materials and labour for non-skid, ceramic, joint free colouredtiles 8 to 10 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, etc,set and jointedin neat cement slurry and jointed in white or coloured cement to matcht as on vertical surfaces such as skirtings, dados, risers etc over 10mm thick backing course in CM 1:4 complete all as specified and directed. |
| 56 | Materials and labour Glazed ceramic colour tiles in vertical surfaces such as skirtings, dados, risers etc of size 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match the tiles over and including 10mm thick backing course in CM 1:4 for receiving tiles. |
| 57 | Materials and labour Heavy duty exterior grade vitrified tiles ( full chrged) of size 300mmx 300xmm x7 to 10mm thickness as in flooring set and jointed in neat cement slurry and pointed in white or coloured cement ot match the tiles over and including cement screed bed 15mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 58 | Supply and fix 4.8mm thick tinted sheet glass, ordinary type with oil putty, in square exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge. |
| 59 | Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 60 | Material and Labour Rendering 15mm (10 + 5 mm) thick in cement mortar 1:4 on fair faces of brick work or concrete surface in two layers each mixed with integral water proofing compound @ 2% by weight of cement (WPC shall be mixed with top layer only i.e 5mm thick) finished the surfaces even and smooth without using extra cement complete allspecified and as directed. Note : - Water proofing compound shall be measured and paid separately as "Supply only" item under relevant item of these schedule. |
| 61 | Material and Labour Rendering 5 mm thick in Cement mortar 1:3 as in ceilingconcrete surfacesfinished the surfaces even and smooth without using extra cement complete allspecified and as directed. |
| 62 | "Supply only"lequidwater proofing compound (ISI marked) complete all as specified and directed. Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ SIKA |
| 63 | Materials and labour Complete removal of existing treatmentold internal surfaces and applying two coats of Acrylic distemper of any colour / tint over a coat of wall care puttywhite based and primercomplete all as specified and directed. |
| 64 | Materials and labour Preparation of newly plasteredwall surfaces of any description and applying two coats of acrylic distemper of any colour / tint over a coat of primerand white based putty complete all as specified and directed. |
| 65 | Materials and labour Preparation of newly plasteredexterior wall surfaces of any description and applying two coats of exterior emusion paint of any colour / tint over a coat of primerupto any height of building including scaffolding with safety measure complete all as specified and directed. |
| 66 | Materials and labour complete removal of existing treatmentexterior wall surfaces of any description and applying two coats of exterior emusion paint of any colour / tint over a coat of primerupto any height of building including scaffolding with safety measure complete all as specified and directed. |
| 67 | Material and LabourPreparation of new steel surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint of any colour/ tint over a coat of red oxide primer complete all as specified and directed. |
| 68 | Material and LabourPreparation of new wooden surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint of any colour/ tint over a coat of pink primer complete all as specified and directed. |
| 69 | Supply and fix 20mm outer dia CPVC pipes SDR 13.5 & plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed. |
| 70 | Supply and fix 25mm outer dia CPVC pipes SDR 13.5 & plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed. |
| 71 | Supply and fix in repairs 15mm bore brass chromium plated wall mixer with provision for Overhead shower with 115mm long bend pipe on upper side, coonecting legs and wall flanges complete all as specified and as directed. Make- Essco Cat Part No. MQT-517 BKN or Equivalent model from make as specified in particular specifications. |
| 72 | Supply and fix in repairs 15mm bore brass chromium plated Centre hole basin mixer screwed for CPVC pipe complete all as specified and as directed. Make- Essco Cat Part No. MQT-516 AKN or Equivalent model from make as specified in particular specifications. |
| 73 | Supply & fix in repairs 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and as directed. Make : Essco Cat No. MQT 526NKN or equivalent model from make as specified in Particular specifications. |
| 74 | Supply and fix in repair 15mm Bib Taps, fancy type, CP, cast copper alloy two in one tap with Wall Flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make :Essco Cat No. MQT -512KN or equivalent model from make as specified in Particular specifications. |
| 75 | Supply & fix in repair ABS body chrome plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and as directed. Make : Essco Cat No. EOS 542A or equivalent model from make as specified in Particular specifications. |
| 76 | Supply & fix in repairs shower arm 240mm long round shape with flage including fixing to steel pipe or union complete all as specified and as directed. Make : Essco Cat No. ALE 536A or equivalent model from make as specified in Particular specifications. |
| 77 | Supply and fix repairs 600mm long CP towel rail fixed with screw complete all as specified and as directed. Make : Essco Cat No. AEC 1111N or equivalent model from make as specified in Particular specifications. |
| 78 | Supply & fix in repairs Chromium plated Health faucet with 8mm Dia, 1.2 Metre long flexible tube and wall hook with N.R.V (Back Flow Preventer)complete all as specified and as directed. Make : Essco Cat No. ALE ESS 583 or equivalent model from make as specified in Particular specifications. |
| 79 | Supply & fix in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 80 | Supply and fix in repair PTMT connection 600 mm long fixed to 15mm GI pipe complete all as specified and directed. Make- Prayag/ Polytuf/ Shakti. |
| 81 | Supply and fix110 mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints fixed to wall etc upto any height of building including necessaryscaffolding and taking down old unserviceable one complete all as specified and directed. |
| 82 | Supply and fix110 mm bore, PVC (SWR) pipe, double socketed, in any length with rubber ring joints fixed to wall etc upto any height of building including necessaryscaffolding and taking down old unserviceable one complete all as specified and directed. |
| 83 | Supply and fix 110 mm bore, PVC (SWR) bends of any radiuscomplete all as specified and directed . |
| 84 | Supply and fix 110 mm bore PVC (SWR) branch piece,single (single Y) equal or unequal completeall as specified and as directed. |
| 85 | Supply and fix in repairs UPVC (SWR) floor trap 75mm bore dia of outlet, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 86 | Supply and fix in repairs Vitreous China wash down water closet pan (ISI Marked, Ist Quality) including "P" or "S" trap (pedestal pattern), Snow white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. Make : Cera Cat part No.Cat. No. S1053101 "S" Trapor equivalent model of make as specified in particular specifications. |
| 87 | Supply and fix in repairs Vitreous China squatting pan of‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding andconnection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floorall as specified and directed by the Engr-in-Charge. Make : Hindware Cat No 20042 equivalent of approved makeas specified in Particular specifications |
| 88 | Supply and fix560x430 mm size vitreous china wash basin whiteincluding32 mm waste coupling of PTMT (half or full threaded, minimum weight 45 gms),waste pipe low density polyethylene pipe 32mm bore and bracketsincluding taking down old wash hand basin alongwith fittings all as specified and as directed. Make:- Cera Cat Part No. S2040108 or equivalent of approved make as specified in Particular specification. |
| 89 | Supply and fix in repairs Vitreous china, half stall urinal, white including CP spreader and 32mm CP waste coupling and PVC waste pipe complete all as specified and as directed. Make:- Cera Cat Part No. Cat. No. S4020101or equivalent of approved make as specified in Particular specification. |
| 90 | Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. Make : CeraModel No B1010107 or equivalent model of make as specified in Particular Specification. |
| 91 | Supply and fix Rotational moulded HDPE water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position,tripple layered ISI markedincluding 20mm bore PTMT ball valve with epoxy coated Aluminium rod and high density ball complete all as specified and directedincluding taking down old unserviceable tank with ball cock.Make:- Sintex / Polycon |
| 92 | Taking down carefully any type of point wiring (light, fan, bell, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets,light fittings etc stacking at site for reuse of serviceable items and removal of unserviceable items from site and making good disturbed faces of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed by the Engineer-in-charge. |
| 93 | Material and labour Point wiring with PVC insulated and unsheathed FR grade cable single core multistranded copper conductor 1.5 Sqmm size, 1100 volts grade cable confroming to IS - 694 1990 drawn through and including PVC casing and caping of suitable size with all accessories including fabricated 1.6mm thickMS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 Sqmm multistranded PVC insulated FR grade and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one switchand switch socket outletpoint / ceiling fan/ exhaust fan point/ switch socket outlet point 3 pin 5 Aamps on independent boardcomplete all as specified and as directed. |
| 94 | All as per item No. 79.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switchwith casing capingcomplete all as specified and directed by Engineer in-charge. |
| 95 | All as per item No. 79.00 here-in-before but using2.5 Sqmm size stranded copper conductor cable, FR grade for one 16 Amp switch/ socket outlet on independent board complete all as specified and directed by Engineer-in-Charge. |
| 96 | Materials and labour Sub main wiring with 2 runs of single core PVC insulated FR type, unsheathed stranded copper conductor of size 4 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor of size 2.5 Sqmm FR type as earth lead drawn in and includingPVC casing caping of suitable size complete all as specified and as directed including taking down old unserviceable submain with casing caping. Note:- One run of 4 Sqmm cable and one run of 2.5 Sqmm cable with one run of PVCcasing caping shall be measured as one unit. |
| 97 | Supply and fix Socket outlet2 in 1, 3 pin 5 /6 Amps 230 volt flushtype complete all as specified and as directed. |
| 98 | Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 5 /6 Amps 230 volt flushtype complete all as specified and as directed. |
| 99 | Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 5 /15 Amps 230 volt flushtype complete all as specified and as directed. |
| 100 | Supply and fix Switch piano flush type, single pole one way 6 Ampscomplete all as specified and as directed. |
| 101 | Supply and fix Ceiling rose surface bakelite, 65x 50mmthree terminals 230 volts complete all as specified and as directed. |
| 102 | Supply and fix Lamp holder , PVC / polycarbonate type with back plate for batten fittings complete all as specified and as directed. |
| 103 | Supply & fixLED lamp of 12/15 watts including necessary connection complete all as specified and as directed by Engr-in-Charge. Make:- Havells cat Part no.LHLDDEEEML8R015 or Make:- Surya cat part No.12W NEO PLUS LED LAMP 6500K or make:- RASHMI Cat part No. RLBU12MP |
| 104 | Supply and fix Electronics fan regulator, step type, solid stateAC 240 Volts, white / Ivory finish complete all as specified and as directed. |
| 105 | Taking down old unserviceable and rusted DB of any size and type alongwith MCB of various capacities and making good the disturbed surfaces complete all as directed by Engineer-in-Charge. |
| 106 | Supply and fix Sheet steel phosphorised powder coated neutral link earth barDB"s double door/metal door where MCBs to be used 4 way single pole and neutral with 200 amps rated bus bar complete all as specified and as directed . |
| 107 | Supply and fix Sheet steel phosphorised powder coated neutral link earth barDB"s double door/metal door where MCBs to be used 8 way single pole and neutral with 200 amps rated bus bar complete all as specified and as directed . |
| 108 | Supply & fix LED tube light fittings suitable for 1x20 watt Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with tube rod including necessary connection complete all as specified and as directed by Engr-in-Charge. Make:- Bajaj cat Part No. BCLAB 20 W WH LED P or Make:- Crompton cat Part No.CCS-103-20-65-SL-DP-NWH or Make:- Havells cat part No. LUMILINEPLUSBS20WLED865SPCSS. |
| 109 | Supply & fixLED Building security light 25/30 watt in aluminium PDC housing, toughened glass cover with IP66 protection with 0.5 mtr GI pipe of suitable size making connection with PVC cable of 0.50 sq mm three core sheatered not more than 0.5 meter in lenght complete all as specified and as directed. Make:- Crompton cat part No.LST-25-CDL-M or Make:- Surya cat Part No. SLE UL 25W IP66 (LXN) or Make:- Bajaj cat part No BCLST 30W LED I. |
| 110 | Supply and fix MCB 6 to 32 Amps, SP, 240 Volts , "C" curve braking capacity 10 kA as directed by the Engr-in-Charge. |
| 111 | Supply and fix MCB 40 Amps, SPN, 240 Volts , "C" curve braking capacity 10 kA as directed by the Engr-in-Charge. . |
| 112 | Supply and fix Exhaust fan AC single phase 240 V of size 300mm sweep, 1400 RPM with louver specially designed by Kitchen in domestic ventilation metal body and blade powder coated metallic finish heavy duty motor and protective bird guard including cutting the existing brickwall in square / round type suitable for fixing exhaust fan including cement work with grouting 4 nos long bolts, nuts, washer and making good to disturbed surfaces with cement mortar 1:3 and finished the surface with two coats of acrylic distemper of existing finish over a coat of primer complete all as specified and as directed by engineer-in-Charge. Make:- USHA Cat part no. 300mm S.PH TURBO HDEF 1400 RPM GREY ISI or Make:- Crompton cat Part no. EXHD300-4-1 or make :- Havells cat Part No.TURBO FORCE SP. |
| 113 | Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment. |
| 114 | Supply and laying in trenches Bricks, sub class "B" over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge. |
| 115 | Supply and fix Ceiling fan AC Single Phase 240 Volts of size 1200mm sweep, metal body and 3 blade,including all fixing arrangements "S" hook completeall as specified and asd irected including taking down old unserviceable fan with "S" hook. Make:- (i) Usha cat part No. NABILA 1 STAR W/OREG or Make:- Havells cat part No.SS 390 METALLIC or Crompton cat part No.Aura metallic. (ii) Old Ceiling fan shall be deposited in E/M store yard and taken on Charges. |
| 116 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 2 core fixed along thebuilding wall with clamp etc including connection complete including taking down old unserviceable XLPE cableall as directed by the Engr-in-Charge. |
| 117 | Supply and fixin repairsGalvanized iron pipe, 40mm bore, light grade with all fittings, laid in floor , wallsfor cable proction complete all as specified & directed. |
| 118 | Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. including taking down old unserviceable earth plate with allbroken/ rusted/ unserviceable accessories |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
