Indian Oil Corporation Limited-IOCL has published Annual Rate Contract For Providing Environment Management Services, Horticulture Works And Civil Maintenance At Nrpl Kohand. Submission Date for this Tender is 17-01-2022. Civil Work Tenders in Haryana. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 03-Jan-2022 | BOQ corrigendum | Financial Bid | 17-01-2022 |
Sl. No. | Item Description |
1 | ARC for providing EMS, Horticulture, Civil maintinance works |
2 | PART-A (Variable Part) |
3 | COMPOSITE ITEMS |
4 | EARTHWORK : |
5 | Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) in all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Charge. |
6 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed by the Engineer-in-Charge : |
7 | In all kinds of soil |
8 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material : |
9 | Beyond 30 cm girth upto and including 60 cm girth |
10 | Beyond 60 cm girth upto and including 120 cm girth |
11 | Supplying chemical emulsion (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) in sealed containers including delivery as specified. |
12 | Diluting and injecting chemical emulsion (Chlorpyriphos/ Lindane E.C. 20% with 1% concentration) for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : |
13 | Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/ sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete : |
14 | Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. : |
15 | Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to designated location/ approved municiple dumping ground for lead up to 10 Km and for all lifts, complete as per directions of the Engineer-in-Charge. [Note: This item shall also be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicles of 3.5 cum or more.] |
16 | CONCRETE WORK : |
17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
18 | 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] |
19 | 1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources] |
20 | REINFORCED CEMENT CONCRETE : |
21 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
22 | 1:2:4 [1 cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] |
23 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : |
24 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
25 | MASONRY WORK : |
26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : |
27 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
28 | Providing and fixing chromium plated brass curtain rods having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : |
29 | 20 mm dia. |
30 | Providing and fixing ISI marked oxidised (copper oxidised as per IS:1378) M.S. door latches conforming to IS:5930 with screws etc. complete : |
31 | 300x20x6 mm |
32 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
33 | 125 mm |
34 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etc. complete : |
35 | Single rubber stopper |
36 | STEEL WORK : |
37 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
38 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the directions of the Engineer-in-Charge : |
39 | Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade. |
40 | FINISHING : |
41 | 12 mm cement plaster of mix : |
42 | 1:4 (1 cement : 4 fine sand) |
43 | Applying priming coat : |
44 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works. |
45 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat). |
46 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete : |
47 | On steel work |
48 | Distempering with 1st quality acrylic distemper (Ready Mix) having VOC content less than 50 gms/litre, of approved brand and manufacture to give an even shade : |
49 | Old work (one or more coats) |
50 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
51 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : |
52 | One or more coats on old work |
53 | REPAIR & REHABILITATION WORKS : |
54 | Repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 SQM including cutting the patch in proper shape, raking out joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable area outside Ownder"s premises, all complete as per directions of the Engineer-in-Charge : |
55 | With cement mortar 1:4 (1 cement : 4 fine sand) |
56 | Chipping of unsound/ weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per directions of the Engineer-in-Charge : |
57 | 50 mm average thickness |
58 | 25 mm average thickness |
59 | Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by the Engineer-in-Charge. |
60 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : |
61 | Semi Rigid Pipe : |
62 | 32 mm diameter |
63 | 40 mm diameter |
64 | Flexible Pipe : |
65 | 32 mm diameter |
66 | 40 mm diameter |
67 | Providing and fixing toilet paper holder |
68 | C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent). |
69 | ALUMINIUM WORK : |
70 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] : |
71 | For fixed portion : |
72 | Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) |
73 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, having brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. : |
74 | With stainless steel cover plate minimum 1.25 mm thickness |
75 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per directions of the Engineer-in-Charge : |
76 | Anodized (AC-15) aluminium tubular handle bar |
77 | Providing and fixing aluminium round shape handle of outer diameter 100 mm with SS screws etc. complete as per directions of the Engineer-in-Charge : |
78 | Anodized (AC-15) Aluminium |
79 | Providing and fixing of graphics/ signages (including printing of direction, entry, exit, department name, etc.) with self glowing/ back lit signs 12"x6" as per specification and directions of the Engineer-in-Charge. |
80 | HORTICULTURE & LANDSCAPING : |
81 | Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of earth measured in stacks will be reduced by 20% for payment]. |
82 | Supplying and stacking sludge at site including royalty and carriage up to any lead complete. [Note: Volume of sludge measured in stacks will be reduced by 8% for payment]. |
83 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note: Volume of cattle manure measured in stacks will reduced by 8% for payment]. |
84 | Supplying and stacking at site dump manure from approved source, including carriage up to any lead complete. [Note: Volume of manure measured in stacks will be reduced by 8% for payment] : |
85 | Screened through sieve of I.S. designation 20 mm |
86 | Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. |
87 | Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR]. |
88 | Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling. [Note: Cost of supplying earth and sludge or manure and mixing shall be paid separately under relevant items of SOR]. |
89 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/ and manure before and after flooding trench with water. [Note: The rate is excluding cost of imported earth, sludge or manure]. |
90 | Supplying & Stacking of Selection No.1/ Doob Grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc. complete as per directions of the Engineer-in-Charge. |
91 | Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. |
92 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge. |
93 | "Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm" |
94 | "Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm" |
95 | Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km lead & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit "EA" shall mean "PER TRIP"]. |
96 | SERVICES |
97 | Contarctor profit (@15% on Part-B; Fixed |
98 | SUPPLY |
99 | Phenyl floor cleaner 5 Ltr pack |
100 | Naphthalene Balls(100GM) |
101 | Liquid Toilet cleaner(Harpic 1L ) |
102 | Hand Cleaner(dettol/savlon/lifebouy)750M |
103 | Urinal Screen(Circular Shapewith Fragran |
104 | Toilet freshener(75gmOdonil Per piece) |
105 | surface disinfectant liquid (lizol)2L |
106 | Mooping Cloths(Material-Cotton,Size-20in |
107 | Grass Broom(43 inch lenghth with plastic |
108 | PART-B(Fixed Part) |
109 | Carrying out maintenance of all civil works, i.e. day to day cleaning, sweeping, mopping, housekeeping, hedge cutting, cleaning of water tank & cleaning of dustbin etc. as per the directions of Engineer-In-Charge. (UOM: EA shall mean engaging 1 nos. of Unskilled manpower for carrying out the above activity for eight hours a day)" (Rate includes P.F.@12% of wages,EDLI-0.5% and PF Admn. Charges-0.5% (total for both 1%),ESI @3.25% of minimum wages , Bonus @ 8.33% of minimum wages, .Reimbursement will be done on actual payment paid to labours with documentary proof ie on line bank receipt. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail