Provision Of Filling Facility For 5 Kg Lpg Cylinder And Composite 10 Kg And 5 Kg Lpg Cylinder At Lpg Bottling Plant, Kanpur => Limited
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Jan 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
→ Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Filling Facility For 5 Kg Lpg Cylinder And Composite 10 Kg And 5 Kg Lpg Cylinder At Lpg Bottling Plant, Kanpur => Limited
BOQ
| Sl. No. | Item Description |
| 1 | 5kg & 5Kg/10 kg Composite Cylinder Filling System and Assoicated equipments (Part-A) |
| 2 | Design, manufacture, testing at manufacturer\"s works and supply of manula auto Filling Machinecomplete with all accessories, controls,pneumatic control etcsuitable for 5.0 Kg ( normal and composite) and 10.0 Kg Composite Cylinder |
| 3 | Design, manufacture, testing at manufacturer\"s works and supply of Check Scale complete with all accessories, controls,pneumatic control, Compact Valve Tester etc suitable for 5.0 Kg ( normal and composite) and 10.0 Kg Composite Cylinder |
| 4 | Design, manufacture, testing at manufacturer\"s works and supply of manual auto Correction unitcomplete with all accessories, controls,pneumatic control etcsuitable for 5.0 Kg ( normal and composite) and 10.0 Kg Composite Cylinder |
| 5 | Design, manufacture, testing at manufacturer\"s works and supply of SQC complete with all accessories, controls,pneumatic control, Compact Valve Tester etc suitable for 5.0 Kg ( normal and composite) and 10.0 Kg Composite Cylinder |
| 6 | Design, manufacture, testing at manufacturer\"s works and supply of manual pneumatic controlTest Bath complete with all accessories, controls, l etc suitable for 5.0 Kg and 10.0 Kg Cylinder |
| 7 | Water spray / sprinkler system for 5 Kg & 10 Kg composite cylinder with water storage tank, water Pump and FLP motor, piping, valve etc complete for ready operation |
| 8 | Supply of Pallets / Cages for stacking / transporting of Composite Cylinders. Each pallet shall have capacity to hold 4 cylinders of 10 kg |
| 9 | Supply ofPallets / Cages for stacking / transporting of Composite Cylinders. Each pallet shall have capacity to hold6 cylinders of 5 kg. |
| 10 | Supply of hydraulic pallet trucks for handling pallets / cages of filled 10 / 5 kg composite cylinders. |
| 11 | Erection and commissioning of 5 kg /10 kg filling system |
| 12 | Part -A Desing, Farbication, Supply, Transportation, Chain Conveyor Systems (Chain conveyor sections of following types including chain, leg cum railing support, railings, wear plates (polyethylene), packing gaskets, fastners, earthing strip, jumper,duly complete in all respects including painting etc.) |
| 13 | Straight section |
| 14 | 90 deg. C |
| 15 | Tail end |
| 16 | Centrally located drive |
| 17 | Roller Conveyor-14.2/19KG |
| 18 | Manual diverger arrangement |
| 19 | Twin Arm Stopper |
| 20 | Drive unit complete in all respects consisting of Hollow Shaft Helical Gear Box5 HP, FLP motor, FLP push button station with FLP glands, required transmission accessories, soap solution tray for drive unit and idler etc. Suitable of conveyor linear velocity around 22 mpm |
| 21 | Transportation of material from the manufacturer\"s works to IOC plant anywhere in India. The distance from manufacturuer\"s city to the destination city (or nearest thereof) shall be reckoned for payment of transportation. For the purpose of payment, the distance shall be rounded off to the nearest 100 Km. |
| 22 | Part- B Supply Cum Erection & Commissoning of Evacuation Vessel & Compressor Package |
| 23 | Straight section |
| 24 | 90 deg. Curved section ( long radius) |
| 25 | Tail end |
| 26 | Centrally locateddrive |
| 27 | Roller conveyor |
| 28 | Manual converger arrangement |
| 29 | Twin Arm Stopper |
| 30 | Drive unit complete in all respects consisting of gear box, FLP motor, FLP push button station with FLP glands, drive shaft,tensioning weights,plumber block andsoap solution tray for drive unit and idler etc. |
AI Tender Summary
Tender Timeline
Dec 28, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender