Improvement Of B.T. Road Fromsuper Bazar To Nandan Kanan Office Site At Sahid Nagar Bbsr. Inward No. 30.
Tender Value
17.54 Lakhs
Estimated cost
Bid Submission
06 Jan 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
→ Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of B.T. Road Fromsuper Bazar To Nandan Kanan Office Site At Sahid Nagar Bbsr. Inward No. 30.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in Hard soil within initial lead of 50 m and initial lift of 1.5 m including rough dressing and levelling the bed as per the specification approved by the department and direction of Engg -in- charge. |
| 2 | Carriage of Excavated earth by mechanical means with in 5km lead including loading and unloading with all cost Conveyance T&P sun dries etc.complete as per direction of Enggineer-in-charge. |
| 3 | Filling in foundation with sand well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of EIC. |
| 4 | P.C.C (1:4:8) with 4cm size cbhg metal including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. |
| 5 | R.C.C work in ground floor of M-20 gradewith 20mm & down grade crusher broken Granite chips including Hoisting & laying. |
| 6 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 7 | Rigid smooth centering and shuttering for R.C.C. works including false works and dismantlling them after casting including cost of materials T & P etc. complete as per the direction of Engineer-in-Charge. . |
| 8 | C.C (1:1½:3) with 12mm to 20mmSize cbhg chips for RCC workIncludingall cost conveyance , Royalty& taxesetc. complete of all materialstowork site asper specification approved ofE.I.C. |
| 9 | Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Based on CPWD Item No. 16.68) |
| 10 | Providing and applying primer coat with Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60Kg/M2 using mechanical means as per clause 502 of MoSRT&H specification for road & bridge work (4th revision) (Data for 3500M2) |
| 11 | Providind and laying \"BITUMINOUS MACADAM\" with hot mix plant using crushed aggregates of specified grading premixed with Bituminous binder of 60/70 penetration grade of bitumen transportred to site laid over a previously prepared surface with a hydrostatic paver finisher with mechanical control to the required grade level and alignment and rolling with smooth wheeled vibrating and tandem rollers to achieve the desired compaction as per clause 504 of MoSRT&H specification for Road & Bridge works. Data for 205 Cum (450 Tonne) |
| 12 | Providing and laying Semi Dense Bituminous Concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen transporting the hot mix to work site laying with a hydro static paver finisher with mechanical control to the required grade, level and alignment rolling with smooth wheeled vibratory and tendem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road & bridge work. (Data for 195 Cum (450T) |
| 13 | Providing and laying of hot applied Thermo Plastic compacted 2.5mm thick including reflectorising glass beds @250 gmsper sqm area thickness of 2.5mm in exclusive of surface applied glass beds as per IRC 35 on road marking over Bituminous surface as per clause 803 of MORT & H specification or road and bridge works (Latest Revision) and as per direction of EIC. |
| 14 | 6mm thick C:P (1:4) finished smooth |
| 15 | Provision for Display Board. |
AI Tender Summary
Tender Timeline
Dec 27, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 06, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender