|
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 2 | Earthwork in excavation for foundation of structures in soil by mechanical means with 1.0 Cum bucket capacity Hydraulic Excavator including setting out, Construction of sharing and bracing, removal of stumps and other deleterious Materials dressing of sides & bottom and backfilling with approved material complete in all respect asperapproveddrawingandtechnical specificationsasperClause301of MoRT&HSpecificationsforRoad&Bridgeworks(5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 3 | Construction of embankment with approved materials deposited at site from road-way cutting and foundation excavation of other structures with all lifts and leads, graded and compacted to meet requirement as per approved drawing and technical specifications complete in all respect asperSection900andClause305of MoRT&H Specification for Road &Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 4 | Loosening to a depth of 150mm, leveling and compacting original ground supporting embankment /sub-grade as per approved drawing and technical specifications complete in all respectas per Section 900 and Clause 305 of MoRT&H Specification for Road & Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 5 | Construction of embankment with approved materials obtained from borrow pits by mechanical means, graded and compacted to meet requirement as per approved drawing and technical specifications complete in all respect as per Section 900 and clause 305 of MoRT&H Specification for Road & Bridge works (5th Revision)& including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 6 | Laying sand as filter layer in sub-base not exceeding 225mm watering and compacting to the required density in OMC with Vibratory Rollercomplete in all respect asperapproveddrawing including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 7 | Providing compacted shoulder with Slag of approved quality, watering and compacting with PRR to achieve the required density in OMC complete in all respect as per approved drawing and technical specifications as per Section 900 and Clause 408of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 8 | Scarifying and removing the existing bituminous road surface to the required depth asperapproveddrawingandtechnical specifications and disposal of scarified materials within all lifts and lead upto 1000mtr. complete in all respect as per Section 900, Clause 305.4.3, 305.8, 305.9.5, 501.8.3.2, 501.8.7.2 and 501.8.8.1 of MoRT&H Specificationsfor Road & Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 9 | Reworking the scarified bituminous surface suitably after supplementing the base materials with sand and compacting finished surface as per approved drawing and technical specifications as per Section 900, Clause 501.8.3.2 and 501.8.8.1 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 10 | Providing WetMixMacadamusingcrushedstone aggregates as per approved drawing and technical specifications complete in all respect asperSection900andClause406of MoRT&HSpecificationsforRoad&Bridgeworks(5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 11 | Providing and applying primer coat with medium setting bitumen emulsion on prepared surface of granular base, including clearing road surface and spraying primer @ 0.60 Kg/ Sqm using mechanical means as per approved drawing and technical specifications complete in all respectas per Section900,Clause501.5.2&502ofMoRT&H Specifications for Road & Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 12 | Providing and applying Tack Coat with medium setting bitumen emulsion on the prepared bituminous/ granular surface including cleaning with mechanical broom and spraying bitumen emulsion @ 0.20 Kg/ Sqm using mechanical means as per approved drawing and technical specifications complete in all respect as per Section900,Clause501.5.2&503ofMoRT&H Specifications for Road & Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 13 | Providing & layingcompacted Bituminous Macadam(Grading-II ) using 60/70 (V6-30) penetration grade BitumenwithHot Mix Plant using crusher broken hard granite aggregates of specified grading premixed with bituminous binder @ 3.3 %by weight of total mix and filler, transporting the hot mix to works site, lying with Hydrostatic Paver Finisher with Sensor Control to the required grade, level and alignment, rolling with Smooth Wheeled, Vibratory and Tandem Rollers to achieve the desired compaction as per Clause No.106, 108, 111, 112, 501, 503 , 504 and section 900ofspecifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 14 | Providing and laying compacted Semi Dense BituminousConcrete (Grading-II) with Batch type Hot Mix Plant using crushed stone aggregates of specified grading, premixed with bituminous binder of 60/70 (VG-30) penetration grade of bitumen, @ 5.00 KG by weight of total mix and filler transporting the hot mixto work site, laying with a Hydrostatic Paver Finisher with Sensor Control to the required grade, leveland alignment, rolling with Smooth Wheeled, Vibtratory and Tandem Rollers to achieve the desired compactionas per approved drawing and technical specifications complete in all respect as per Section 900, Clause 501 & 508 of MoRT&HSpecificationsforRoad&Bridgeworks(4th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 15 | Providing & laying 80mm thick factory made cement concrete interlocking Paver Block of M-35 grade(using branded cement) made by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 100mm thick compacted bed of coarse sand, filling the joints with fine sand including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 16 | Providing and layingPlain cement concrete of grade M-20 (Using Branded Cement) in sub-structure complete as per approved drawing and technical specification complete in all respect using approved quality of Cement and coarse granite aggregateconforming to Table 1000-1 as per Section900,1000,1500,1700, 2100 & 2200 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision)including dewatering, centering and shuttering & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 17 | a) Bothside Edge of Road |
| 18 | Painting two coats with Synthetic Enamel Paint of approved quality and shadeat any elevation on Kerb, Guard Post and other structures etc for the finished item of work as per technical specifications complete in al lrespect including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 19 | Filling foundation and plinth with excavated earth ramming etc complete as per approved drawing and technical specifications as per Clause 304 and Section 900 of MORT&H Specifications for Road & Bridge works (5th Revision)complete in all respect & as per direction of the Engineer-in-Charge. |
| 20 | Providing and fixing R.C.C. (1:2:4) (using Branded Cement) Guard Posts of 1.00metre height and 15 cm diameter including cost of steel reinforcementfor finished item of work as per approved drawing and technical specifications complete in all respectas per Section 800, 900, 1000, 1500, 1600 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision)& including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 21 | Providing road marking with Hot Applied Thermoplastic Compound 2.5mm thick including reflectorising glass beads@250gms per sqm area , thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes etc.for finished item of work as per approved drawing and technical specification complete in all respect as per Section 900 and Clause 803 of MoRT&H specification for road and bridge work (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 22 | Providing and fixing of Retro-Reflectorised Cautionary, Mandatory and Informatory Sign Board as per IRC:67 made of high intensity grade sheeting vide Clause No. 801.3 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm , firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing& including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 23 | i) 90 cm equilateral triangle |
| 24 | ii) 60 cm equilateral triangle |
| 25 | iii) 60 cm circular |
| 26 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide Clause No. 801.3 of specifications for road and bridge works of Ministry of Road Transport & Highways (5th Revision) fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9 Sqm supported on a mild steel angle iron post 75mm x 75mm x 6mm , firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing& including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 27 | a) Up to 0.90 Sqm |
| 28 | Providing and fixing of Reflective Pavement Marker (Road Stud) 100x 100 mm, die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lens reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973 etc. finisheditem of work as per technical specifications complete in all respect as per Section 800 and Clause 804 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 29 | Supplying, Fitting & Fixing M.S. Window Grill made out of MS Angle (30x30x5) mm frame with MS Flat (19x5) mm size confirming to IS Specification hold Fast with MS Angle (30x30x5)mm size (each side = 2 nos) - 4 nos of 150mm length bifurcated tips at the top to be fixed with Cement Concrete (1:3:6) including drilling holes in walls priming the grill with red oxide primer including cost ,conveyance, taxes of all material, labour ,cess required for the work completeas per the direction of the Engineer-in-charge. |
| 30 | Providing, filling Clean Sand of approved quality in road work for construction of drainage layer and foundation trenches of structures in uniform layers, watered and rammed/ compacted as per approved drawing and technical specifications complete in all respect as per Section 900, 2100 and Clause 401 & 304 of MoRT&H specifications for Road & Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 31 | Providing and layingPlain cement concrete of grade M-15 (Using Branded Cement) in foundation for levelling course in Box cell culvert, HP culvert, drain etc complete as per drawing and technical specification using High Strength approved quality Cement and coarse granite aggregateconforming to Table 1000-1 with formwork as per Section900,1000,1500,1700 & 2100 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision)& including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 32 | a) Wing wall, Curtain Wall |
| 33 | Providing P.C.C M-15 (Using Branded Cement) grade with 40mm and down grade hard granite (crusherbroken) aggregateincluding hoisting and laying in open foundation/substructure ofAbutment,Pier,Wing wall/ Return wall, Cutoff wall,Rigid Apron etc. of C.D. work or in places as shown in the drawing as per approved drawing & section 900,1000,1500, 1700,2100,2200,2300 of MoRT&H specification for Road & Bridge works (5th Revision) including dewatering, centering and shuttering, cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 34 | a) Sub Structure, Wall,Toe Wall, Curtain Wall, Parapet wall |
| 35 | Providing R.C.C M-25 grade (Using Branded Cement) with 20mm and down grade hard granite (crusher broken)aggregate and fine aggregate conforming to IS 383) inabutment, wing wall/ return walll, pier,dirt wall, etc. of C.D. works / Box Cell Culverts as per approved drawing and Section900,1000,1500,1700,2100,2200, 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision) including dewatering, centering and shuttering, cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 36 | a) Foundation Wing wall base, Box Bottom slab, Raft of Boxcell Culvert |
| 37 | b) Sub-structure Hunch, Middle |
| 38 | c) Super Structure Deck Slab, Kerb |
| 39 | d) Dirt wall, Wing wall& Tie Beam |
| 40 | Supplying steel i.e.Tor Steel / HYSD Bars from primary producerof SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL make (grade Fe-500D) includingstraightening, cutting, bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (Linear measurement will be taken and quantity will be calculated on standard weight of tor steel / HYSD bars for all heights) complete as per specification & direction of Engineer-in-charge. |
| 41 | Providing and laying R.C.C M-30 grade in wearing coat excluding cost of steel reinforcement for finished item of work as per approved drawing and technical specificationscomplete in all respect as per Section 900, 1000, 1500,1600, 1700 2200 & 2700 and clause no. 2702 of MoRT&H specifications for Road & Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 42 | Construction of reinforced cement concrete crash barrier of M-25 grade (Using Branded Cement) with HYSD reinforcement confirming to IRC-21 and dowel bars 25mm dia, 450mm long at expnasion joints filled with premoulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure of MOST Circular No. RW-NH-33022-1-94-DO-III dtd.24 June 1994 as per dimension in the approved drawing and location as per Clause 811 of MoRT&H specifications for Road & Bridge works (5th Revision)including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 43 | a) Crash Barrier |
| 44 | Providing Weep Holes in abutment, wing wall, retaining wall, toe wall and RCC drain etc with 100mm dia A.C. pipe as per approved drawing and technical specifications complete in all respect as per Section 2200 & Clause 2706 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 45 | Back filling behind abutment, wing wall and return wall with sandy material etc. complete as per approved drawing and technical specifications as per Section2500,2700 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 46 | Providing and applying painting over the plastered surfaces with water proofing cement paint of approved quality and shade on new work two coat to give an even shade includingcost of all materials, labour, conveyance, taxes,cess, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. |
| 47 | Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete as per Clause No. 202 of MoRT&H specifications for Road & Bridge works (5th Revision) including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 48 | Dismantling of existing structure like Culvert, Bridges retaining wall & other structure including T&P scaffolding where ever necessary, sorting the dismantled material disposal of unserviceable material and stacking the serviceable materials with all lift and lead of 1000 mtr. as per clause No. 202 of MORT&Hs of (4th Revision) complete in all respects including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 49 | a) RCC Deck slab |
| 50 | b) RR Stone Masonry in cement mortar |
| 51 | Providing and laying Reinforced cement concrete of grade M-20 (Using Branded Cement) with 20mm and down grade hard granite (crusher broken)aggregate and fine aggregate conforming to IS 383 and table 1000-1 in Box Cell Culvert, Drain, Retaining wall etc as per drawing and technical specification using High Strength approved quality Cement with formwork as per Section900,1000,1500,1700 & 2200, 2300 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision)& including centering, shuttering, cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 52 | a) Drain Base |
| 53 | b) Drain wall |
| 54 | c) Drain Cover Slab |
| 55 | Supplying, fitting and fixingIndustrial vitrified tiles in floor treads or steps and landing of premium grade having thickness 8mm to 10mmof size 300mm x 300mm confirming to IS 4457 of approved make on 20mm thick bed of C.M. (1:4)(Using Branded Cement) including cost of all materials, taxes, cess, labour, T&P etc. required for the work in all respect as per specification & direction of Engineer-in-charge. |
