|
| 1 | Item No- 1:- Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 2 | Item No- 2:- Compacting the hard murum side widths including laying in layers oneach side with vibratory roller including artificial watering etc. complete. |
| 3 | Item No- 3:- Supplying trap/ granite/ quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them torequired gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking Boulders (Hand broken). |
| 4 | Item No- 4:- Spreading 80/40 mm metal for road work including sectionong etccomplete as directed by Engineer in charge . |
| 5 | Item No- 5:- Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 6 | Item No- 6:- Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete |
| 7 | Item No- 7:- Providing and laying Cast in situ/Ready Mix cement concrete in M-10of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork,laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 8 | Item No- 8:- Providing and laying in situ / ready mix M20 CC of trap/ granite/quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumenetc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) |
| 9 | Item No- 9:- Providing and fixing board displaying information, such as \"Name ofwork, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on frontside and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross bracedM.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width includingall fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 10 | Total in Figures |
| 11 | Item No- 10:- Charges for Testing |
| 12 | Item No- 11:- Charges for Testing |
| 13 | Item No- 12:- Royalty Charges |
| 14 | Total in Figures |
