Selection Of An Agency Selection Of An Agency For Repair / Renovation Of Bharat Nagar Marathi, Nmc Schools In Abd Area Under Nagpur Smart City Project.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Jan 2022
0 days left
EMD
24000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
NAGPUR → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Selection Of An Agency Selection Of An Agency For Repair / Renovation Of Bharat Nagar Marathi, Nmc Schools In Abd Area Under Nagpur Smart City Project.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to alead of 1000 metres including removal of debris, waste material etc. |
| 3 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same care fully and stacking the service able materials as adn where directed including throwing the unserviceable materiasls out side etc. care fully and throwing out there fusal outside etc.complete |
| 4 | Providing second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 5 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete. |
| 6 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface.(excluding primer coat) etc.complete. Internal & Eternal Wall Surface |
| 7 | Providing and applying one coat of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing surface (excluding primer coat) etc. complete. MS Door & Window |
| 8 | Providing and fixing White Glazed Earthen ware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap,brackets for fixing the cistern, 32mm dia.P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe,lead trap, soil pipe connectionup to the outside face of the wall |
| 9 | Providing and fixing White Glazed Earthen ware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap,brackets for fixing the cistern, 32mm dia.P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe,lead trap, soil pipe connectionup to the outside face of the wall |
| 10 | Providing and fixing Orissa type white glazed earthenware 575mm water closet pan including Strap with earthenware foot rests, cast iron soil and vent pipe upto out side face of the wall 1:2:4 brickbat lime concrete bedding with out flushing tank and it saccessories etc.complete. |
| 11 | Providing and laying matt finish ceramic tiles of having size 30cmx30cm confirming to I.S.15622/2006 (group DII-A) and 7 to 8mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. For Toilet |
| 12 | Providing and laying ceramic tiles of having size 30cm.x30cm .and confirming to corresponding I.S.for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colourcement slurry cleaning curing etc. complete. |
| 13 | Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hipand jack rafters, purlins connecting to truss members and the like, as per detailed design sand drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connection sand one coat of anticorrosive paint and over it two coats of oil paint in go f approved quality and shade etc. complete. |
| 14 | Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast interlocking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium mark etroads, low volume roads, utility cuts on art erial roads etc. as specified and as per IS15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to works ite including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of VSI crushed sand of 50mm thickness including necessary excavationinall stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete. Are taken by Cadd |
| 15 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plantat OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material |
| 16 | Providing structural steel working hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting,fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and paintingcomplete. |
| 17 | Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete |
| 18 | Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete |
| 19 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). |
| 20 | Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete |
| 21 | Providing structural steel work in trusses for parking shade, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete |
| 22 | Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 square meter made out of ___mm aluminum sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two Number mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing atsite has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty (2mm Aluminium sheet class B)Size of Board 5ft X 10ft |
| 23 | Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. or as directed by Engineer Incharge complete |
| 24 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 25 | Providing & Fixing colored glazed eartenware wash hand basin of 55Cm X 40CM size including cold water pillar / cold & hot water pillar tap bracket rubber plug and brass chain stop tap and necessary pipe connection including PVC waste pipeand trap up to the outside face of the wall. making good the damaged surface testing etc. complete |
| 26 | Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 27 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 28 | Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary beforeuse) |
| 29 | Providing and laying in walls/ceilings/floors 25 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 2.49 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 30 | Electrical Works |
| 31 | Supplying and erecting HMS PVC conduit 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON. |
| 32 | Supplying & erecting mains with 3x2.5 sq.mm FRLHS copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 33 | Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 34 | Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 35 | Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 36 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 37 | Point wiring for light/fan/bell in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and requiredaccessories as per specification No: WG-PW/SW |
| 38 | Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FRLSH grade copper wire, flush type switch,earthing and required accessories as per specification No: WG-PW/SW |
| 39 | Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WG-PW/SW |
| 40 | Wiring for plug on board withSwitch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW |
| 41 | Supplyingand erecting single pole and neutral distributionboard (SPNDB)surface/flush mounted with 2 waysfor incoming and 10 ways for outgoing SP MCB’son iron/ GI frameas per specification no. SW-SWR/MCBDB |
| 42 | Supplying, erecting& terminatingXLPE armoured cable 3 core2.5sq. mm. copperconductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU |
| 43 | Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameterLow Carbon Steel with 250 micronmolecular copper bonded earthing rod ofLength 3malong with 25 kg Carbonbased environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI |
| 44 | Supplying and erecting Annealed bare copper wireof high purity of different sizesused forearthing onwall with necessarycopperclampsfixedon wall/cable/conduitwithscrews in an approved manner. |
| 45 | Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP |
| 46 | Supplying, erecting, testing and commissioning selfcontained water cooler 230/250 V 50 cycles nominal cooling capacity of 80 litres/hr and storage capacity 120litres with partially stainless steel body complete. specification no. AP-WCR/WC |
| 47 | Supplying and erecting ultra violet storage type waterpurifier ( RO+UV+UF) with softener for safe drinkingwater consisting of UV germicidal tube of 8W capacity chokemade of copper wire and two indicator lamps, storagecapacity of purified water 7 to 8 litre with activated carbonfilter and softener operating on 230 V single phase A.C. supply. |
| 48 | Supplying and erecting submersible pumpset of 2.25 KW/3 HP with 230 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 42 to 20 m head at 30 to 90LPM discharge & (max. efficiency at 34 m head & 60 lpm) discharge & delivery pipe of Size-50 mm diameter with a necessary H type clamps as per specification no. WP-SMP |
| 49 | Supplying and erecting flat flexible 3 core 4 sq mm PVCsheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 50 | Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry runand overload protection suitable for 3 phase pumps |
| 51 | Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected to jet/submersible pump with required material complete. |
| 52 | Supplying & erecting automatic control panel for 1 Ph, 230 volt, a.c.. Submersible/centrifugal pump set upto 2 HP consisting of DOL starter Of suitable relay range S.P.P., Combined ammeter/ voltmeter, indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection |
| 53 | Supplying erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete. |
| 54 | Supplying & fixing CRCA sheet Box with earthing terminals for housing 2 Pole RCCB on iron frame/laminated board complete |
| 55 | Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB |
| 56 | Supplying and laying (including excavation of suitable width& depth up to 90 cm) 50 mm outside dia. double wallcorrugated pipes (DWC) of HDPE for enclosing cablebelow ground/road surface, to required depth complete. |
AI Tender Summary
Tender Timeline
Dec 24, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender