Selection Of An Agency For Repair / Renovation Of Sant Kabir, Nmc Schools In Abd Area Under Nagpur Smart City Project
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Jan 2022
0 days left
EMD
16730
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
NAGPUR → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Selection Of An Agency For Repair / Renovation Of Sant Kabir, Nmc Schools In Abd Area Under Nagpur Smart City Project
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 3 | Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. |
| 4 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 5 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same care fully and stacking the service able materials as adn where directed including throwing the unserviceable materiasls out side etc. care fully and throwing out there fusal outside etc.complete |
| 6 | Lowering down the debris obtained from breaking and removing the cement plaster/ burnt brick masonrywithout causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete. |
| 7 | Providing and laying Cast insitu/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneissmetal for R.C.C. slabs and landings as per detailed design sand drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the for med surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finishis to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintel spardis, copings, fins, arches etc. as per detailed designs, drawing sand schedules. including cutting, bending, hooking the bars, binding with wires or tack weldingand supporting as required complete. |
| 9 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain /diamond pattern on bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 10 | Providing second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 11 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete. |
| 12 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface.(excluding primer coat) etc.complete. Internal & Eternal Wall Surface |
| 13 | Providing and applying one coat of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing surface (excluding primer coat) etc. complete. MS Door & Window |
| 14 | Providing and fixing White Glazed Earthen ware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap,brackets for fixing the cistern, 32mm dia.P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe,lead trap, soil pipe connectionup to the outside face of the wall |
| 15 | Providing and fixing White Glazed Earthen ware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap,brackets for fixing the cistern, 32mm dia.P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe,lead trap, soil pipe connectionup to the outside face of the wall |
| 16 | Providing and fixing Orissa type white glazed earthenware 575mm water closet pan including Strap with earthenware foot rests, cast iron soil and vent pipe upto out side face of the wall 1:2:4 brickbat lime concrete bedding with out flushing tank and it saccessories etc.complete. |
| 17 | Providing and laying matt finish ceramic tiles of having size 30cmx30cm confirming to I.S.15622/2006 (group DII-A) and 7 to 8mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 18 | Providing and laying ceramic tiles of having size 30cm.x30cm .and confirming to corresponding I.S.for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colourcement slurry cleaning curing etc. complete. |
| 19 | Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hipand jack rafters, purlins connecting to truss members and the like, as per detailed design sand drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connection sand one coat of anticorrosive paint and over it two coats of oil paint in go f approved quality and shade etc. complete. |
| 20 | Providing structural steel working hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting,fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and paintingcomplete. |
| 21 | Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete |
| 22 | Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete |
| 23 | Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete |
| 24 | Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 square meter made out of ___mm aluminum sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as perIRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two Number mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be dulypainted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing atsite has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty (2mm Aluminium sheet class B)Size of Board 5ft X 10ft |
| 25 | Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. or as directed by Engineer Incharge complete |
| 26 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 27 | Providing & Fixing colored glazed eartenware wash hand basin of 55Cm X 40CM size including cold water pillar / cold & hot water pillar tap bracket rubber plug and brass chain stop tap and necessary pipe connection including PVC waste pipeand trap up to the outside face of the wall. making good the damaged surface testing etc. complete |
| 28 | Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 29 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 30 | Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary beforeuse) |
| 31 | Providing and laying in walls/ceilings/floors 25 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 2.49 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 32 | Electrical Works |
| 33 | Supplying and erecting HMS PVC conduit 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON. |
| 34 | Supplying & erecting mains with 3x2.5 sq.mm FRLHS copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 35 | Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 36 | Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 37 | Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 38 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 39 | Point wiring for light/fan/bell in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and requiredaccessories as per specification No: WG-PW/SW |
| 40 | Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FRLSH grade copper wire, flush type switch,earthing and required accessories as per specification No: WG-PW/SW |
| 41 | Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WG-PW/SW |
| 42 | Wiring for plug on board withSwitch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW |
| 43 | Supplyingand erecting single pole and neutral distributionboard (SPNDB)surface/flush mounted with 2 waysfor incoming and 10 ways for outgoing SP MCB’son iron/ GI frameas per specification no. SW-SWR/MCBDB |
| 44 | Supplying, erecting& terminatingXLPE armoured cable 3 core2.5sq. mm. copperconductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU |
| 45 | Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameterLow Carbon Steel with 250 micronmolecular copper bonded earthing rod ofLength 3malong with 25 kg Carbonbased environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI |
| 46 | Supplying and erecting Annealed bare copper wireof high purity of different sizesused forearthing onwall with necessarycopperclampsfixedon wall/cable/conduitwithscrews in an approved manner. |
| 47 | Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP |
AI Tender Summary
Tender Timeline
Dec 24, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender