Repair And Maintanance Works To The Toilets At Rajendra Road In Ward No 9 In Udumalpet Municipality Repair And Maintanance Works To The Toilets At Rajendra Road In Ward No 9 In Udumalpet Municipality
Tender Value
8.10 Lakhs
Estimated cost
Bid Submission
04 Jan 2022
0 days left
EMD
8100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
UDUMALPET → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintanance Works To The Toilets At Rajendra Road In Ward No 9 In Udumalpet Municipality Repair And Maintanance Works To The Toilets At Rajendra Road In Ward No 9 In Udumalpet Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing of the following items including labour acharges ,conveyance charges etc., complete complying with standard specification and as directed by the departmental officers. |
| 2 | a) ) Removing the Existing damaged Water Closet |
| 3 | b) Dismantling the Damaged exisiting Pressed tiles & weathering course , Complete Complying with Std Specifications. |
| 4 | c) Dismantling the Damaged exisiting Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs , Complete Complying with Std Specifications. |
| 5 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 20mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 6 | Brick workusing CountryBricks of size 8-3/4\" x 4-1/4\" X2-3/4\"\" in Cement Mortar 1:5 (One cement and five m.sand) including curing neat finishing, etc., complete complying with standard specifiction. |
| 7 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 8 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (one cement & Three P-sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete (The crushed stone sand to be used in base mortar shell confom to gradation as per IS 1542-1977) |
| 9 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 10 | S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in positionwith necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Colour |
| 11 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3(one cement & Three P-sand)thick laid in-situ and pointed with same coloured cement mixed with colouring pigments(The crushed stone P-sand to be used in base mortar shell confom to gradation as per IS 1542-1977) |
| 12 | Dadooing walls withGlazed tiles of sizes 300mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2(one cement & Two P-sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.(The crushed stone sand to be used in base mortar shell confom to gradation as per IS 1542-1977) |
| 13 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 14 | Painting two coats for old Wood work surface using best quality synthetic enamel paint of approved colour and quality (The make and colour should got approved by the Municipal Engineer before using of work) etc complete complying with standard specification ). |
| 15 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter |
| 16 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc |
| 17 | Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 18 | a) 32mm dia UPVC Pipe |
| 19 | b) 25mm dia UPVC Pipe |
| 20 | c) 20mm dia UPVC Pipe |
| 21 | Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 22 | a) 32mm dia UPVC Tee |
| 23 | b) 32mm dia UPVC Elbow |
| 24 | c) 32mm dia UPVC Coupling |
| 25 | d) 25mm dia UPVC Tee |
| 26 | e) 25mm dia UPVC Elbow |
| 27 | g) 20mm dia UPVC Tee |
| 28 | h) 20mm dia UPVC Elbow |
| 29 | Supplying and fixing in position 15mm diaPVC (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 30 | Wiring with 2x 1.5 sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point SD - 16 |
| 31 | Supply and fixing of single box type 4\"36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 87 |
| 32 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains ( SD 65 ) |
| 33 | ADD GST 12% |
AI Tender Summary
Tender Timeline
Dec 27, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender