Tender For Miscellaneous Plant Operations

Sharing tender

Tender For Miscellaneous Plant Operations-DEFECTIVE VALVES HAVE TO BE TAKEN UP FOR SALVAGING SHALL BE PLACED IN BATCHES IN THE ULTRASONIC. VALVE CLEANING MACHINE FILLED WITH CARBON TETRA CHLORIDE / KEROSENE. THE MACHINE TO BE OPERATED FOR 30 MINS FOR CLEANING OF VALVES. THE VALVES THEN ARE TO BE TAKEN OUT AND DRIED. THE VALVES THEN HAS TO BE PLACED IN THE TEST BENCH AND SUBJECTED TO TEST OF LEAKAGE APPLYING HIGH PRESSURE OF 17 KG/CM2 AND THEREAFTER WITH LOW PRESSURE OF 0.5 KG/CM2. VALVES PASSING THE ABOVE TEST TO BE REBRANDED AS USEABLE AND SUITABLY IDENTIFIED. O-RING FOR THESE VALVES (FOUND SOUND) HAS TO BE REPLACED. REJECTED VALVES TO BE IDENTIFIED AND REBRANDED AS SCRAP, DECANTATION OF THE T/W HAS TO BE DONE WITHIN THE FREE TIME WHENEVER THE RAKE IS PLACED. CARRYING OF HOSE PIPES, CONNECTING TO TANK WAGONS, SHIFTING THE SAME AFTER UNLOADING OF TANK WAGONS, COLLECTING SAMPLE AND CHECKING DENSITY AND TEMPERATURE OF PRODUCTS, OTHER Q.C.TESTS, CHECKING DIPS OF TANK WAGONS BEFORE CONNECTING THE TANK WAGONS, CHECKING EMPTY TANK WAGONS AFTER DECANTATION OF THE TANK WAGONS. CONTRACTOR HAS TO PROVIDE MANPOWER FOR CARRYING OUT THE JOB, STAY PLATE STRAIGHTENING IN TERMS OF NO CYLINDER REPAIRED BY UNSKILLED MANPOWER DURING 8 HR SHIFT DUTY.REMOVAL OF CYLINDERS FROM THE SEGREGATED AREA OR CHAIN CONVEYOR.SHIFTING OF CYLINDERS TO COLD REPAIR SHED BY CHAIN CONVEYOR OR ANY OTHER MEANS REQUIRED IF CHAIN CONVEYOR SHIFTING IS NOT POSSIBLEIDENTIFICATION OF COLD REPAIR CYLINDERS IN CATEGORY OF 14.2 KG, 19 KG, 35 KG AND 47.5 KGSTRAIGHTENING OF BENT AREAS IN FOOT RING, VP RING, STAY PLATE ETC.PUTTING THE REPAIRED CYLINDERS BACK INTO CHAIN CONVEYOR FOR FEEDING INTO CAROUSEL.THE NOS OF CYLINDERS STRAIGHTENED ON DAILY BASIS HAS TO BE CERTIFIED BY CONTRACTOR AND SIGNATURE OF SHIFT IN-CHARGE IS TO BE TAKEN.THE UP KEEPING AND MAINTENANCE OF STAY PLATE STRAIGHTENING MACHINE WILL BE UNDER THE SCOPE OF CONTRACTOR. HE HAS TO ENSURE THAT PROPER SPARES OF STAY PLATE STRAIGHTENING MACHINE ARE AVAILABLE SO THAT THERE IS MINIMUM DOWNTIME AT HIS OWN COSTWORK AREA HAS TO BE KEPT FREE OF SPILLAGE OF OIL ETC ON DAILY BASIS.THE MACHINE IS TO BE CLEANED ON DAILY BASISMINIMUM NO OF CYLINDER STRAIGHTENING ON DAILY BASIS SHOULD BE AS SPECIFIED IN TENDER. ANY REASON FOR QTY BELOW SPECIFIED QUANTITY IS TO BE PROVIDED WITH WRITTEN JUSTIFICATION BY THE CONTRACTOR.THE CONTRACTOR HAS TO ENSURE THAT NO UN REPAIRED CYLINDERS ARE LYING AT THE DAY END, IF THE GENERATION OF CYLINDER IS HIGHER THAN CONTRACTOR HAS TO DEPLOY EXTRA MANPOWER FOR THE SAME AFTER PRIOR APPROVAL BY THE SHIFT OFFICER.