Military Engineer Services-MES has published Spl Repair Of External Perimeter Security Wall Between Gd Post No 06 To 08 Inside Cod Kanpur. Submission Date for this Tender is 15-01-2022. Wall construction Tenders in KANPUR Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 31-Dec-2021 | REVISED BOQ | BOQ | 08-01-2022 |
2 | 08-Jan-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-01-2022 |
Sl. No. | Item Description |
1 | BnR Schedule |
2 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facing etc including stacking the serviceable materials and disposal of unserviceable material, debris and disposal of rubbish outside MD land.complete all as specified and directed. |
3 | Excavating in trenches, n. exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts, wells, cesspits manholes pier holes, under ground cable/pole fondation/ water supply pipe lineand getting out in soft/loose soil including forming bottom surface to required level or slope complete all as specified and directed by Engineer-in- Charge. |
4 | Returning filling in with approved excavated soil including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified. |
5 | Removal of excavated material(soil) n. exc 50mand depositing where directed at a level n exc 1.5 m above the starting pointcomplete all as specified and directed. |
6 | M&L PCC (1:4:8) type D-2 using 40mmgraded stone aggregate as in fdn/mass concrete complete all as directed by Engineer –in-charge |
7 | M & L use and waste of Formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams sides and soffits (if any ) of foundation and plinth beams and similar work vertical or to batter rough finished surfaceall as specified and directed.. |
8 | M & L use and waste of Formwork to sides ofroof, pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete square, rectangular, polygaonal or flat surfaces of roof complete all as specified and directed. |
9 | M & L use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of conrete flatcomplete all as specified and directed. |
10 | M & L for mild steelTMT bars 10mm dia and overcut to length, bent to shape required, includingbinding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed.. |
11 | S&F mild steelTMT bars6 mm to 8 mm diacut to length, bent to shape required, including, rings cranking, stirrups, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed.. |
12 | M&L for Reinforced cement concrete M- 25(design mix) (20 mm graded stone aggregates) as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete all as specifiedand directed . |
13 | M & L for Reinforced cement concrete M- 25 (design mix) (20 mm graded stone aggregate) as in columns, pillars, piers etc as all specified and directed. |
14 | M & L for Reinforced cement concrete M- 25(design mix) (20 mm graded stone aggregate) as in beams, cantilevers, lintel etc as all specified and directed. |
15 | M&L for brick work with flyash bricks straight or curved on plan exc 6.0 m mean radius built in CM (1:4) complete all as specified and directed by Engineer-in-Charge.. |
16 | M&L broken glass coping in 30 mm thick cement mortar 1:3 on top of wall @14kg/Sqm complete all as specified and directed by Engineer-in-Charge.. |
17 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete or brick work surface finished even and fair complete all as specified and directed. |
18 | M&L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of concrete or brick work surface finished even and fair complete all as specified and directed. |
19 | M&L two coat of cement base paint over a coat of cement primeron newly plastered surface on wall including preparation of surface complete all as specified and directed. |
20 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good the disturbed surface complete all as specified and directed. |
21 | S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. |
22 | S&F MS work as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh etc ) inclu. all necessary drilling , bolting or riveting etc and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified. |
23 | Supplied and fixed 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches/under floor complete all as specified |
24 | M&L for preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coatred oxide primer complete all as specified and directed. |
25 | Note for all items of BOQ: Entire work listed in BOQ shall be executed in Restricted area. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail