Construction Of Roads - Rosera Shivajinagar To Jakhar
Tender Value
19.99 Lakhs
Estimated cost
Bid Submission
04 Jan 2022
0 days left
EMD
39992
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ROSERA → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Roads - Rosera Shivajinagar To Jakhar
BOQ
| Sl. No. | Item Description |
| 1 | ROSERA SHIVAJINAGAR TO JAKHAR |
| 2 | Construction of Sub-Grade and Earthen Shoulders with approved material obtained from borrow pits with all lifts and leads, Transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 M & 100 M as per Technical Specification Clause 303.1 (Including Royalty & Labour Cess). |
| 3 | Granular Sub-base with well Graded Material (Table 400.1):- Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 4 | WBM Grading 2:- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. |
| 5 | WBM Grading 3:- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 6 | Prime Coat (Low Porosity):- Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0Kg/Sqm using mechanical means as per Technical Specification Clause 502. |
| 7 | Tack Coat:- Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25-0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 8 | Mix Seal Surface Type B: Providing, laying and rolling of close-of graded premix surfacing material of 20mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing coarse on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grade as per Technical Specification Clause 509. |
| 9 | GST @ 12% :- |
| 10 | L.C. @ 1% |
AI Tender Summary
Tender Timeline
Dec 24, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender