Construction Of Community Hall In Nagayagoundanpatty Panchayat In Uthamapalayam Block Under Mlacds 2020-2021
Tender Value
25 Lakhs
Estimated cost
Bid Submission
30 Dec 2021
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uthamapalayam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Hall In Nagayagoundanpatty Panchayat In Uthamapalayam Block Under Mlacds 2020-2021
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation for foundation in all soils and sub soilsand to full depth as may be direacted except in rock requiring blasting but inclusive of shoring, strutting and baling water wherver necessary and depositing the surplus earth within Standard Specification the etc.complete. |
| 2 | Supllying and filling with filling sand in layers not more than 15 cm thick, well rammed, wattered and compacted etc., complete. |
| 3 | Supplying and filling with US gravel from appd., quarry for basement filling in layers not more than 15 cm thick, well rammed, wattered and compacted etc., complete. |
| 4 | Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidation etc., complete. |
| 5 | Supplying and erection centering for sides and soffits inculding necessary supports and structingfor plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade including all charges etc., complete. |
| 6 | Reinforcement Cement concrete 1:1.1/2:3 mix using 20 mmHBGSmetal inculding cost and coveyance of all materials to site and all labour charges etc., complete. |
| 7 | Supplying & fabrication,placing in position of steel rods for RCC works inculding cost of steel rods & binding wire to site and all labour charges etc., complete. |
| 8 | Brick work with cement mortar 1:5 mix using country bricks of size 83/4\"x43/8\"x23/4\" inculding cost and coveyance of all materials to site and all labour charges etc., complete. |
| 9 | Plastering with Cement Morter 1:3 mix to 10 mm thick inculding cost and conveyance of all materials to site and all labour charges etc., complete. |
| 10 | Plastering with Cement Morter 1:5 mix to 12 mm thick inculding cost and conveyance of all materials to site and all labour charges etc., complete. |
| 11 | Weathering course with broken brick jeely for 20 mm size mixed with pure slacked lime (no sand to be used) in proposation of 32:12.5 cft to proper gradient,well beation with wooden beaters inculding cost and coveyance of all materials to site and all labour charges etc., complete. |
| 12 | Terrace flooring with one coarce of new machine pressed tiles of size 23x23x2 cm using Cm 1:3 with water proofing compound 2% weight of cement used and the joints pointed with samemorter inculding cost and coveyance of all materials to site and all labour charges etc., complete. |
| 13 | Cost, supply and fixing with cuddapah slab 20-30mm thick for cupboard including cost and conveyance of all materials to site and all labour charges etc. complete |
| 14 | Cost & Supply of MS door of size 1.80 x 2.10m including all charges etc., complete Main door |
| 15 | Cost & Supply of MS door of size 0.90 x 2.10m including all charges etc., complete Door - D1 |
| 16 | Cost & Supply of Toilet door of size 0.75 x 2.10m including all charges etc., complete |
| 17 | Fabrication and supply of MS window of anyrequired size with three leaves outer frame made of 35 x 35 x 5mm equal MS \"L\" angle moullion section made 35 x 35 x5 mm equal \"T\" section shtter frame made of 25 x 25 x 5mm equal MS \"L\" angle for horizontal |
| 18 | Window W 1.50 X 1.30M |
| 19 | Window W1 1.20 X 1.30M |
| 20 | VentilatorV1 0.60 X 0.45M |
| 21 | Fixing in position Mild steel double leaf door including joinerie and all other labour charges etc. complete as per standard specifications |
| 22 | Fixing in position Mild window & ventilator including joinerie and all other labour charges etc. complete as per standard specifications |
| 23 | Supplying & Fixing in positionof Indian type Water closet 580x440mm of approved quality including all cost and conveyence |
| 24 | Cost, supply & fixing of Hand wash basin ( without pedastal white ) with all accessories etc., complete. |
| 25 | Cost, supply & fixing of Veiw mirror PVC/Fiber framed ( size of 600 mm x 450 mm ) 5.50mm thick mirror, shelf type with hard board backing etc., complete. |
| 26 | Cost for Rain water down fall 110mm dia PVC pipe line including all charges etc., complete. |
| 27 | Provision for Sanitary pipe line arrangements including all charges etc., complete. |
| 28 | 110 mm dia PVC Pipe |
| 29 | 110 mm dia PVC Bend |
| 30 | 110 mm dia PVC Elbow |
| 31 | 110 mm dia PVC Tee |
| 32 | 110 mm dia PVC Vent Cowl |
| 33 | Painting two coats with ready mixed Plastic emulsion of first class quality paint and of approved colour over aprimingcoat, inculding through scrapping, clean removal of dirt etc. complete and inculding necessary plasterof paris , putty whereever required, inculding cost and conveyance of all materials to site and all labour charges etc., complete. |
| 34 | Painting two coat of new iron works such as steel Doors,windows,ventilators, etc., with best approvedfirst quality of synthetic enamel paint of approved colour over the existing priming coat,inculding cost and conveyance of all materials to site and all labour charges etc., complete. |
| 35 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil). SD 25 |
| 36 | Supply and fixing of 5A 3 pin and 3 pin combined flush type wall socket with 5A flush type switch on suitable TW box. SD 133 |
| 37 | Supply and fixing of single box type 4\"36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 87 |
| 38 | Supply and fixing of 4\"40 W twin street light flu. fitting complete With copper choke and condensor with 19mm dia GI pipe (Class \"B\") with 1 No. 19mm GI Bend complete on the existing post / wall With 16 A aerial fuse unit on MS plate with PVC unsheathed Cu. leads, with MS clarnps and aluminium painting with Flu. Tubes. SD 94 |
| 39 | Supply and fixing of fancy glass shade and 11w CFL for BH point SD 80 |
| 40 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. SD 83 |
| 41 | Supply and fixing of 1200 mm (48\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp. SD 110 |
| 42 | Supply & fixing of 32 Amps DP switch with metal clad of 500V with fuse & neutral (Side Handle) on suitable TW Box PWD Earthing. SD-143 |
| 43 | Supply and fixing of 20mm dia GI, EB service pipe (2.00m) etc. complete |
| 44 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil). SD 25 |
| 45 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Dec 24, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 30, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 30, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender