Dismantlling And Construction Of New Toilet At Ward No.24 Jothir Mada Sandhu In Tiruchengode Municipality.
Tender Value
18 Lakhs
Estimated cost
Bid Submission
29 Dec 2021
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchengode Municipality. → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Dismantlling And Construction Of New Toilet At Ward No.24 Jothir Mada Sandhu In Tiruchengode Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling,clearing away RCC Structuresand carefully stacking materials useful for re-use for any thickness of walls etc complete., |
| 2 | Dismantling,clearing away Brickworkand carefully stacking materials useful for re-use for any thickness of walls etc complete., |
| 3 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 4 | Supplying and filling in foundation andbasement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. |
| 5 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 6 | Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29m high for plane surfaces such as RCC Slabs,Rectangular beams,Tee (or) ELL beams,Lintels,bed block,slabs,landing beam,canopy side slab,or boxing (or)vertical slabs,rectangular (or) quare(or)round columnsetc.,as detailed below with all cross bracings using M.S Sheets of size 90cmx60cm and B.G 10 Stiffended with welded M.S.Angles of size25mmx25x3mm for boarding laid over silver oak(or)country wood joist of size 10cmx6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13 cm dia spaced out 75 cm centre to centre or at suitable intervals etc.,complete complying with std.specification |
| 7 | Column and Plinth beam |
| 8 | Slab |
| 9 | Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 10 | Supplying fabricating and placing in position of MS/RTS rods including cutting, bending into shape, tying and placing the grill in position including cost of binding wire including cost and conveyance of all materials and labour etc., complete as per stan |
| 11 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 12 | Brick work in Cement Mortar in 1:5 ( One cement and Five Sand ) using best quality of Country bricks of size 8¾x 4 ¼ x 2 ¾ including all cost of materials and labour charges includingCuring charges etc., complete as per Standard Specificationand as directed by department officials. |
| 13 | weathering course concrete using best quality broken brick jelly uniform gauge in pure slaked line over the R.C.C roof slab in the proportion brick jelly to limb being 32:10:0.5 by volume and laid over in a single layer and consolidatedto the requried des |
| 14 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete |
| 15 | Supplying and fixing in position white glazed Indian water closet of size 580 X 440mm of Orissa type of approved quality with \"P\" or \"S\" trap with sand cushion and forming flooring alround the closet using 40mm broken brick jellylime concrete 1:2:5 ; 100mm thick and finishing the top torequired slope and including giving necessary connection to cast iron soil pipes by dismandling masonry / RCC works and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmentalofficersetc complete as per standard specification. |
| 16 | suppling and fixing of position of Europeantype water closetwhite glazed earthem wall with \"p\" or \"s\" trap of procelain foot rests with sand cushioning and forming flooring the water closet using 40 mm broken brick jelly in lime concret. |
| 17 | Plastering with cement mortar 1:5 ;12 mm thick in all floors etc., complete complying with standard specifications (S.I.306) |
| 18 | Special ceiling plastering and finishing the exposed surfaces of all RCC items of workswith cement mortar 1:3 ; 12mm thick including hacking the surface and providing necessary cement mortar nosing, beading as per size and specification wherevernecessary using the same mix in all floors etc., complete |
| 19 | Paving the flooring with ceramic tiles of following types of approved colour and qualitylaid in cement mortar 1:3 (one cement and three sand ) 20mm thick in all floors and the top pointed with the same coloured cement etc., complete in all floors. |
| 20 | Dadoing walls with the following types tiles of suitable size of approved quality and colour set in cement mortar 1:2 (one cement ,two sand); 10mm and pointing with colour cement neatly etc., complete in all floors. |
| 21 | Providing GRANOLITHIC FINISH of the following thick with PCC 1:2:4 (one cement, two sand and Four Jelly) using 10mm to 12 mm HBGS jelly etc., |
| 22 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification. |
| 23 | White washing with freshly burnt white shell lime in all floors including cost of lime, best quality of blue powder, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specifications. |
| 24 | Painting new iron works with two coats ofapproved quality and colour of synthetic enamel paint over the existing red oxide primer in all floors etc ., complete complying with standard specifications. |
| 25 | wiring with 2x 1.5 sqmm ( 22/0.3) PVC insulated SC.unsheathed Cu, conductor of 1100 V grade in suitable PVC rigid on wall and ceilling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point/ fan p[oint( for electronic Regulator) S.D. No 24 |
| 26 | Supply and fixing of WT head fitting with guard ( Philips / bajaji/ Crompton/K. Litre) suitable for incandescent lamp with 60 W Bulb . S.D. No 83 |
| 27 | Supply and fixing of single box type 4\"40 W flu, fitting complete with copper ckoke and condenser , with conduit pipe suspension from the ceilling with PVC unsheathed Copper leads from terminals to the fitting with tube ( S.D. 94) |
| 28 | Supply and run of 2 of 4 m2 ( 56/0.3) PVC insulated scunshared cu. Conductor grade in 25 mm GI pipe si-uitable both side with necessary angle iron weight andf end with angle support ( SD 70) |
| 29 | Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour SD 55 |
| 30 | Supply and run of 2 of 4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour SD65 |
| 31 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. ( SD 53) |
| 32 | Supply and fixing of 32 Amps DPIC Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only SD 143 |
| 33 | Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class \"B\" GI pipe of dia not less than 32mm complete with necessary masonry work SD 234 |
| 34 | Supply delivery fabricarion of MS doors and windows with out frame and shutter frame in MS angle of size 40mm x40mmx 6mm with MS sheet flat 25mm x25mmx 6mm and MS sheet of 18 gauge including ventelating arrangementusing 20mm square rods with locking arrangementsincluding two coats of approved enamel paint over coat of red oxide including cost of amgles ,plats,Fabriation charges etc complete |
| 35 | supply and fixing of 1000 lit HDPE PVC Tank for water supply as per standrad specification. |
| 36 | Cost and supply of PVC pipe and specials. Gl Pipe and Gl specials and all labur charges etc., complete. . Specials |
| 37 | supply of 110 mm dia PVC Pipe |
| 38 | supply of 110 mm dia PVCBend |
| 39 | supply of 110 mm dia PVCTEE |
| 40 | Supply of 25 mm dia PVC pipe |
| 41 | supply of 25 mm dia PVCBend |
| 42 | supply of 25 mm dia PVCTEE |
| 43 | supply of 110 mm dia PVCElbow |
| 44 | supply of 15 mm dia C.I Tap |
| 45 | Geophysical survey charges including conveyancy for the Geo phycical isstruments and other accessories. |
| 46 | supply of 150 mm dia outer dia PVC casing pipe for erection of new borewell as per complete. |
| 47 | Drilling of bore well in side well Lateral bore( Horizintal borewell)well 150mm dia including drilling and all machinery etc complete. |
| 48 | Drilling of 150 mm dia borewellup to casing pipe. |
| 49 | Drilling of 150mm dia bore well beyond casing pipe |
| 50 | Supply and delivery of clear water vertical wet type submersible pumpset 2HP 50X75 m suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %etc complete., |
| 51 | Supply and delivery of 2HP Single Phase Panel Board D.O.L.With Two level guard and auto startdirect online starter confirming to IS13947 and IEC60947-1 suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). |
| 52 | Labour charges for the erection of 2HP Horizontal shaft, centrifugal pumpset (coupled/Monoblock) in bore well / Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 meters and delivery pipes to therequired length with valves, pressure guages upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter , Capacitor single phasing preventor and laying and jointing the cables and Twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authories. (TWAD SOR 2021-22.P-244, SI No-17c- ii) 2 HP Submersible pumpset. |
| 53 | Supplu and delivery of2.5sq.mm 3 core copper cable etc complete |
| 54 | Solid PVC door( Solid panel PVC door without frame)shutters using 19 Gauge 19mm MSsquare tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. |
| 55 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 56 | Supply and fixing of incineratoras per standard specification |
| 57 | Supply and fixing of Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fastetc etc. |
| 58 | GST 12% |
AI Tender Summary
Tender Timeline
Dec 24, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 29, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 30, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender